Job thumbnail

Technician

Aerotek

09/24/2021

Posting ID: JP-002350917

Location icon
Boydton, Virginia
Full Time
Share:Facebook iconTwitter iconLinkedin icon

Currently seeking fiber technicians and communication technicians!

Description:

Fiber Tech

Cabling & Termination

The Fiber Technician must have basic copper termination skills

The Fiber Technician will install a work area outlet for the floor, modular furniture, and wall (terminate CAT 3 & CAT 5 jacks. Mount faceplates and surface mount boxes correctly. Adhere to IES COMMUNICATIONS labeling standards).

The Fiber Technician will build closets (Mount and install backboards, cross-connects, racks, patch panels, fiber optic, and hardware). Install grounding for racks, equipment, and cable as required. Complete all IDC connections (e.g. terminate 110/66 blocks and patch panels).

The Fiber Technician performs testing, continuity test horizontal and riser cable, use of volt-ohmmeter, troubleshoot opens, crosses, shorts, and transpose pairs on horizontal and riser cable, use a tone set.

The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA, and MPO/MTP connectors, for both multi-mode & single-mode fiber

The Fiber Technician will terminate simplex & duplex jumper cord

The Fiber Technician will terminate & breakout outside plant (loose tube) fiber (e.g. Corning/Commscope)

The Fiber Technician will terminate & breakout outside plant (loose tube) fiber (e.g. 3DNX)

The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber

Lead Fiber Tech

Cabling & Termination

The Fiber Technician must have basic copper termination skills

The Fiber Technician will install a work area outlet for floor, modular furniture and wall (terminate CAT 3 & CAT 5 jacks. Mount face plates and surface mount boxes correctly. Adhere to IES COMMERCIAL labeling standards).

The Fiber Technician will build closets (Mount and install backboards, cross connects, racks, patch panels, fiber optic and hardware). Install grounding for racks, equipment and cable as required. Complete all IDC connections (e.g. terminate 110/66 blocks and patch panels).

The Fiber Technician performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts and transpose pairs on horizontal and riser cable; use a tone set.

The Fiber Technician installs LC, SC, ST, FC, FDDI, SMA and MPO/MTP connectors, for both multi-mode & single-mode fiber

The Fiber Technician will terminate simplex & duplex jumper cord

The Fiber Technician will terminate & breakout outside plant (loose tube) fiber (e.g. Corning/Commscope)

The Fiber Technician will terminate & breakout outside plant (loose tube) fiber (e.g. 3DNX)

The Fiber Technician will terminate indoor tight buffered multimode and single-mode fiber

The Fiber Technician will install fan out kits including buffer tube

The Fiber Technician will calculate end to end loss budgets in accordance with TIA/EIA standards for multimode & single-mode fiber

Splicing

The Fiber Technician will perform mechanical splicing with all types of fiber cable

The Fiber Technician will perform fusion splicing with all types of fiber cable

The Fiber Technician performs building entrance splices, maintenance space, and direct buried splices

Communications Tech

Job Duties and Responsibilities:

The Communications Technician II will install a work area outlet for floor, modular furniture and wall (terminate CAT 3 & CAT 5 jacks. Mount face plates and surface mount boxes

The Communications Technician II will build closets (Mount and install backboards, cross connects, racks, patch panels, fiber optic and hardware). Install grounding for racks, equipment and cable as required. Complete all IDC connections (e.g. terminate 110/66 blocks and patch panels).

The Communications Technician II performs testing: continuity test horizontal and riser cable; use of volt-ohmmeter; troubleshoot opens, crosses, shorts and transpose pairs on horizontal and riser cable; use a tone set.

The Communications Technician II will identify active voice or data circuits.

The Communications Technician II will assume responsibility for effective performance of crew and provide necessary training; coordinate personnel and timeline to complete project.

Skills:

Cat6, Cat5, Splicing, Install, Data center, Low voltage, Cable, security

Top Skills Details:

Cat6, Cat5, Splicing, Install, Data center, Low voltage, Cable

Additional Skills & Qualifications:

Communications tech

The Communications Technician II must be self-motivated, positive in approach, professional and help create, develop and implement project process improvement(s).

The Communications Technician II must promote the Company culture and mission to all employees, vendors, clients and business partners.

The Communications Technician II must be able to act as the Company liaison for interface with customer representative(s).

The Communications Technician II must possess proven problem solving skills, critical thinking skills and the ability to effectively read, write and give oral presentation(s).

The Communications Technician II must be able to work at heights, off of a ladder and in confined spaces, lift up to 50 pounds and move up to 75 pounds.

The Communications Technician II must be able to see and distinguish different colors, read small print and hear and recognize audible signals such as dial tones.

The Communications Technician II must be able to travel within the branch territory and/or regional territory as needed.

Fiber Tech

Education, Certification, License, and Skill Requirements:

Must possess a High School diploma or GED equivalent

Must possess and be proficient with the listed tools.

Must be proficient at terminating all connector types and methods for SMF and MMF systems (Unicam, anaerobic, heat-cure)

Must have Testing & Troubleshooting MMF & SMF systems experience (OTDR & PMLS)

Must be able to meet IES driving standards policy

Prefer 3-5 years of experience in Fiber

Prefer Industry Certifications (Corning/FOA)

Prefer Data Center installation experience

Prefer Mechanical and Fusion Splice experience

Prefer OSP / Confined Space Entry experience (splicing)

Must be able to use the following trade Tools: Screwdriver (regular and Phillips), drywall saw, torpedo level, tape measure, snips (with belt sheath), pliers (needle nose and channel locks), hammer, wrench set, cable stripper, flashlight and gloves.

Experience Level:

Entry Level

About Aerotek:

We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity. As a Best of Staffing® Client and Talent leader, Aerotek's people-focused approach yields competitive advantage for our clients and rewarding careers for our contract employees. Since 1983, Aerotek has grown to become a leader in recruiting and staffing services. With more than 250 non-franchised offices, Aerotek's 8,000 internal employees serve more than 300,000 contract employees and 18,000 clients every year. Aerotek is an Allegis Group company, the global leader in talent solutions. Learn more at Aerotek.com.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Contact Information

Recruiter: Christina Slesinger

Phone: +17572710793

Email: cslesinger@aerotek.com

Related Courses

Blog