<div><div>Day Shift: 6:00 AM-2:30 PMTypical starting pay, $18.30/hr.What We Can Give You:Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more!Assembler I at Ditch Witch:This employee performs mechanical work building machinery using various hand and power tools (wrenches, hammers, impact tools, etc.). This includes working with mechanical, hydraulic, fuel, and electrical systems on machinery. The employee also performs other duties as assigned.What Will You Do? </div><div><ul><li>Read information from blueprints, drawings, production records, written instructions, technical documents, etc.  </li><li>Fit, position, and fasten components to build machinery or sub-assemblies of machinery using vises, clamps, wrenches, air-powered tools, pliers, etc.  </li><li>Handle components and completed pieces of equipment.  This includes operating equipment to move it and check its functions by using steering wheels, control levers, knobs, buttons, etc. while observing and evaluating equipment functions.  </li><li>Use a computer to check the location, inventory, and routing of parts.           </li><li>Record information electronically.  </li></ul></div></div><div><div>What Do You Need:  </div><div><ul><li>High School Diploma or equivalent preferred.   </li><li>Have appropriate basic mechanical skills and aptitude.  </li><li>Professional mechanical assembly or repair experience would be a plus.    </li><li>Demonstrate appropriate reading, clerical, and basic math skills, including the ability to understand written instructions, maintain production records, and perform routine calculations.  </li></ul></div></div><div><div>Work Environment: </div><div><ul><li>Manufacturing plant conditions (indoors, with variable temperature, humidity, noise, and dirt).  </li><li>Physical hazards such as powered vehicle, bicycle, and pedestrian traffic, sharp objects, moving machinery, compressed air power supplies, and materials handling.  </li><li>Working with hazardous materials, including solvents, oils, grease, paint, and fuels.  </li></ul><div><div>Essential Physical Functions:   </div></div><div><div>The physical demands for this job are classified as medium and include the following:   </div><div><ul><li>Be able to regularly handle items weighing up to 60 pounds from floor to knuckle.   </li><li>Be able to regularly pull or push items weighing up to 50 pounds.   </li><li>Be able to regularly lift items weighing up to 35 pounds from knuckle to shoulder.   </li><li>Be able to regularly lift items weighing up to 25 pounds from shoulder to overhead.   </li><li>Job requires frequent walking, bending, squatting, kneeling, and climbing.   </li><li>Job requires occasional sitting, twisting, elevated work, and continuous standing.   </li></ul></div></div></div></div><div>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.</div>

public

Assembler - Ditch Witch

<div><div>$3,000 Hiring Bonus!Day Shift: 40 hours per week, Monday-Friday, overtime as neededTypical Starting Pay: $18.39/hr.-$23.00/hr.Assembler at HammerHead:This employee performs mechanical work building machinery using various hand and power tools (wrenches, hammers, impact tools, etc.). This includes working with mechanical, hydraulic, fuel, and electrical systems on machinery. The employee also performs other duties as assigned.What Will You Do?</div><div><ul><li>Read information from blueprints, drawings, production records, written instructions, technical documents, etc.  </li><li>Fit, position, and fasten components to build machinery or sub-assemblies of machinery using vises, clamps, wrenches, air-powered tools, pliers, etc.  </li><li>Handle components and completed pieces of equipment.  This includes operating equipment to move it and check its functions by using steering wheels, control levers, knobs, buttons, etc. while observing and evaluating equipment functions.  </li><li>Use a computer to check the location, inventory, and routing of parts.           </li><li>Record information electronically.  </li><li>Consistently meets or exceeds expectations for Safety, Quality, Productivity, Performance, and Attendance metrics.</li><li>Give input on line process, BOM structure and new product introduction.</li></ul></div></div><div><div>What Do You Need? </div><div><ul><li>High School Diploma or equivalent preferred.   </li><li>Typically 18 to 36 months of directly related experience required, including mechanical assembly or repair experience.</li><li>Have appropriate basic mechanical skills and aptitude, including using mechanic's tools such as wrenches, pliers, screwdrivers, etc. This should be indicated by past performance of mechanical repair, maintenance, or assembly work.  </li><li>Be knowledgeable of SAP and be able to utilize the system, and assist others, based upon job needs.</li><li>Demonstrate appropriate reading, clerical, and basic math skills, including the ability to understand written instructions, maintain production records, and perform routine calculations.  </li><li>Able to perform assembly with little to no instruction and train others on your assembly.</li><li>Ability to test and troubleshoot.</li></ul></div></div><div>Work Environment: <ul><li>Manufacturing plant conditions (indoors, with variable temperature, humidity, noise, and dirt).  </li><li>Physical hazards such as powered vehicle, bicycle, and pedestrian traffic, sharp objects, moving machinery, compressed air power supplies, and materials handling.  </li><li>Working with hazardous materials, including solvents, oils, grease, paint, and fuels.  </li></ul></div><div><div> </div><div>Essential Physical Functions:   </div></div><div><div>The physical demands for this job are classified as medium and include the following:   </div><div><ul><li>Be able to regularly handle items weighing up to 40 pounds from floor to knuckle.   </li><li>Be able to regularly pull or push items weighing up to 50 pounds.   </li><li>Be able to regularly lift items weighing up to 35 pounds from knuckle to shoulder.   </li><li>Be able to regularly lift items weighing up to 25 pounds from shoulder to overhead.   </li><li>Job requires frequent walking, bending, squatting, kneeling, and climbing.   </li><li>Job requires occasional sitting, twisting, elevated work, and continuous standing.   </li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.</div></div>

Assembler - HammerHead

Who Are We?  Exmark, located in Beatrice, Nebraska is a division of The Toro Company. Exmark is the leading manufacturer of commercial mowers and equipment for the landscape professional. Exmark mowers are trusted 2-to-1 over the next best-selling brand of zero-turn mowers by landscape professionals. All Exmark products are designed to help customers increase productivity, while delivering unmatched quality.Hours:2nd Shift, 2:00pm - 10:00pmPay: $19.59 plus $2.00 shift differential for a total of $21.59 for 2nd Shift.What Will You Do?In order to grow and build a successful career with Exmark, you will be responsible for: <ul><li>Performing assembly duties to produce a finished product.</li><li>Preparing work by following standard work instructions; gathering parts, tools, and materials.</li><li>Bolting, screwing, clipping or otherwise fastening parts together using a variety of hand tools (electric and pneumatic).</li><li>Maintaining a safe and clean working environment by complying with procedures, rules, regulations, and active participation in all 5S efforts and initiative.</li><li>Learning a variety of different assembly stations.</li></ul>What Do You Need?To be considered for this role, an individual should meet the following minimal requirements: <ul><li>To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.</li><li>Some technical knowledge and ability to follow standard work and procedures.</li><li>Experience in using power tools helpful.</li></ul>BENEFITS: Employees are eligible for benefits the first of the month following their hire date.<ul><li>Medical Insurance</li><li>Dental Insurance</li><li>Vision Insurance</li><li>401k</li><li>10 paid holidays</li><li>Vacation and Sick Leave</li><li>and more!</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Assemblers with New Rates, 1st & 2nd Shift - Exmark

<div><div><div><h1>Associate Production Planner - The Toro Company</h1>  <h2>Who Are We?    </h2>Toro in Tomah, Wisconsin is a premier innovator of equipment for turf and landscape grounds management, sidewalk snow removal, and specialty grounds care maintenance. Built for performance with quality to last, Toro equipment is ideal for golf course turf management, sports fields, collegiate campuses, residential and commercial property maintenance, and public green spaces. We market and sell TTC products worldwide through a network of distributors, dealers, mass retailers, hardware retailers, equipment rental center, and home centers—as well as online direct-to-end users.At the Toro Company, you will find many opportunities to share your ideas and develop your talents, with a financially successful market leader.  You will enjoy a workplace founded on ideals, where people and performance are valued equally, where ethics are a way of life, and where relationships thrive on trust and respect.<h2>Your Opportunity: </h2>Toro is looking for an Associate Production Planner in Tomah, WI.  This role analyzes SAP reports and screens to firm requirements to sourcing with necessary follow up to verify the purchase order is released in a timely manner.   Work with suppliers to manage inventory levels and keep the proper flow of parts to fabrication and assembly areas.<h2>Sponsorship: </h2><ul><li>Applicants must be legally authorized to work in the United States. </li><li>We are unable to consider OPT, J1 or F1 students, nor sponsor or take over sponsorship of an employment VISA at this time, regardless of expiration date. </li></ul><h2>Work Location: </h2><ul><li>This opportunity is on-site at The Toro Company, in Tomah, WI.   </li><li>Associate Production Planner candidates should prepare for 5-days on-site in Tomah, WI for the majority of the schedule. </li><li>Monday-Friday, 7:00am-3:30pm and overtime as required. </li></ul><h2>What Will You Do? </h2>In order to grow and build a successful career with The Toro Company, you will be responsible for: <ul><li>Attend Tier meetings daily and communicates material status.</li><li>Ensure production needs are met.</li><li>Support Manager, Planning and Production Control.</li><li>Develop the material requirements for assigned commodities using all Toro SAP information, planned order and buy information.</li><li>Specialize in critical need activities to support Production Planning.</li><li>Plan purchase orders and JIT materials within inventory, freight costs and turn ratio goals. </li><li>Firm release specifying quantities and delivery dates utilizing the desired inventory level policies.  Maintain the A, B, C policies as prescribed.</li><li>Work with the buyer and vendor to resolve any and all problems. </li><li>Coordinate all transportation activities for assigned commodities keeping the overall costs within the optimum cost and time parameters. Follow the Tomah/Toro freight policies.</li><li>Reports problems in a timely manner, work with supplier until issues are resolved. Assists in the issuance of lines down report.</li><li>Spends 90% of the day on daily actions to support planning and operations</li></ul><h2>What Do You Need? </h2>The requirements listed below are representative of the knowledge, skill, and/or ability required.  Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.   To be considered for this role, an individual should meet the following minimal requirements: <ul><li>HS Diploma or GED equivalent. </li><li>Computer skills to include Microsoft Word, Excel, Outlook, and Internet Explorer</li><li>Excellent verbal and written communication skills for working with internal and external customers</li><li>Strong organizational skills</li><li>Exceptional critical thinking skills</li><li>Attention to detail</li><li>Demonstrated self-initiative</li></ul><h2>Preferred? </h2><ul><li>Bachelor Degree in a related field preferred. </li><li>2-4 years of prior experience with SAP, MS Office, and material planning and/or manufacturing preferred. </li></ul><h2>Other Job Related Components? </h2><ul><li>Works directly with the planning team. Works with multiple suppliers. Develop rapport with both the vendor and buyer. </li><li>Makes oral and written presentations.  Must work with suppliers, sourcing, manufacturing in a professional manner whether on a one-on-one basis or large group situations.</li><li>Typical manufacturing plant conditions (indoors, with variable temperature, noise).</li></ul>  <h2>What Can We Give You?    </h2>At The Toro Company, we are always working to make sure our interns know just how valued they are.  In addition to competitive pay- The Toro Company offers interns a variety of perks, including:  <ul><li>Dress for your day - We know you're more productive when you're comfortable, which is why TTC employees are encouraged to take advantage of our casual environment. </li><li>Location – Located in Tomah, Wisconsin 54660, which is centrally located for most commuters.  </li><li>Wellness - The Toro Company offers a variety of mental health and financial health resources to all employees.</li><li>Competitive Salary –  A reasonable estimate of the annual pay range is between $20.39-$27.17​. Salary will be determined by experience and qualifications, and geography.  Cash compensation is one piece of our competitive total rewards package. Cash compensation is one piece of our competitive total rewards package. If you need to, you can access your pay early with the One@Work app, formerly the Even app.</li></ul>At The Toro Company, we are committed to fostering a secure and trustworthy recruitment process for our applicants. Recruitment fraud is a potential threat to job seekers, so please be aware that throughout our recruitment process, you’ll never be required to pay any fees or disclose personal financial details when applying to TTC opportunities.    We are proud to be an Equal Opportunity Employer and consider qualified applicants without regard to race, color, religion, sex (including pregnancy and related needs and conditions, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit based factors. We celebrate diversity and are committed to creating an inclusive environment for all employees. #LI-Onsite #LI-LVD1</div></div></div>

Associate Production Planner  - The Toro Company

Applicants must be legally authorized to work in the United States. We are unable to sponsor or take over sponsorship of a school/employment visa at this time, regardless of expiration date.Who Are We?     BOSS Snowplow, located in Iron Mountain, Michigan is a division of The Toro Company.  BOSS is a leader in the snow and ice management business with a growing lineup of plows for trucks, UTVs and ATVs, salt and sand spreaders, and box plows built for the snow and ice management professional, as well as the homeowner. With a focus on uncompromising quality and high-level craftsmanship. BOSS has grown to be a leader in the sale of truck plows. What Will You Do?  In order to grow and build a successful career with The Toro Company, you will be responsible for:<ul><li>Must have the ability to understand, troubleshoot, and program complete robotic systems.</li><li>Install, set-up, program, and conduct preventative maintenance, including all types of robot’s vision systems, and automation controllers.</li><li>Regularly reads electrical or electronic schematics.</li><li>Must know how to operate all equipment and specialized tools in a safe and proper manner.</li><li>Provide advanced design and development of automation systems and equipment to enhance production efficiency</li><li>Work closely with Manufacturing, Engineering, and Maintenance departments to develop, coordinate, and implement technical training</li><li>Supporting continuous improvement initiatives throughout the plants</li><li>Provides input to strategic decisions that affect the functional area of responsibility</li><li>Assist with work instructions, equipment set-up procedures, and preventative maintenance processes.</li><li>Drive Continuous Improvement activities to meet and exceed operational objectives and goals. Including Cutting, Forming, Machining, Welding, painting, and assembly</li><li>Project Management Responsibilities for implementation; including project timing, budget, and successful implementation to your customer (i.e., Weld/Machine Department)</li><li>Manage relationship with current and new vendors/integrators for equipment purchases and existing equipment needs</li><li>Collaborate with the leaders/operators in various processes across the site to identify automation opportunities</li><li>Regularly benchmark industry for best practices and advancements that can be applied to our operations</li><li>Provides assistance with troubleshooting equipment issues when required by maintenance staff</li><li>Develops the Investment Authorization Request (IAR) for Capex related to automation projects</li><li>Develop and execute the site strategy for automation</li></ul>Preferred but not required:<ul><li>Understands and regularly uses programming software including Rockwell Software applications, ABB Rapid, and Fanuc KAREL.</li><li>Provide in-depth machine control programming for automation equipment and quality inspection processes, including support of existing equipment</li></ul>What Do You Need?  To be considered for this role, an individual should meet the following minimal requirements:  <ul><li>Bachelor's Degree in Mechanical or Electrical Engineering or similar discipline, required. </li><li>Engineer II-2-4 years expereince </li><li>Engineer III-5+ years experience</li></ul>What Can We Give You?     At BOSS Snowplow, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits – BOSS Snowplow offers employees at our Iron Mountain location, MI a variety of perks, including:   Dress for your day - We know you're more productive when you're comfortable, which is why employees are encouraged to take advantage of our casual, office-plant blended environment.  Wellness - In addition to physical wellbeing, TTC offers a variety of mental health, financial health, and other types of resources to every full-time employee.  Volunteerism - The Toro Company is proud to provide employees 20 hours of paid time to volunteer in the community.  Growth Opportunities – TTC prides itself on giving our employees the chance to grow their careers. Tuition reimbursement, opportunities to move into new areas of interest, and promotion opportunities are a few examples.   Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between ​$77000​ - ​$115000. Cash compensation is one piece of our competitive total rewards package. You may be eligible to participate in an incentive program, which rewards employees based on individual and organizational performance. Eligibility and award amounts are determined by company policy and performance metrics. If you need to, you can access your pay early with the One@Work app, formerly the Even app. We are proud to be an Equal Opportunity Employer and consider qualified applicants without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit based factors. We celebrate diversity and are committed to creating an inclusive environment for all employees.   #LI-BOSS<ul><li></li></ul>

Automation Engineer - BOSS Snowplow

2nd Shift, 2:55 PM-11:00 PM, Monday-FridayTypical starting pay, $33.22, plus $1.25 shift differentialWhat Can We Give You?Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more! CNC Sheet Metal Fabricator at The Toro Company:To adjust and operate computer numerically controlled machines relating to sheet metal fabrication which could include lasers and press brakes.What Will You Do?<ul><li>Program nest (using CAD or CAM software) and produce all sheet metal parts produced in laser cutting machines.</li><li>Set up and run CNC press brake.</li><li>Experience or demonstrated abilities in basic machining.</li><li>Monitor sheet metal cell workload and ensure that all prototype parts are produced on time according to the schedule.</li><li>Utilize and operate proper material handling equipment.</li><li>Ensure that all parts produced in sheet metal cell meet print and process specifications through in-process parts inspections.</li><li>Responsible for all training given within the sheet metal cell.</li></ul>Note: The responsibilities and tasks outlined in this document are not exhaustive and may change as determined by the needs of the company.What Do You Need?<ul><li>HS diploma or equivalent required.</li><li>1-3 or more years proven press brake experience. </li><li>Experience or demonstrated abilities in basic machining. </li><li>Experience or applicable technical training in tool and die, or demonstrated abilities. </li></ul>Work Environment:<ul><li>Physical demands for this job can range from very light to very heavy. Lifts up to five pounds on a frequent basis in difficult work positions and up to 40 pounds on an occasional basis. Deals with heavy weights on a rare basis, normally during set-up. </li><li>Lasers present unique safety hazards which may or may not be visible. Safety rules must be understood and strictly adhered to. </li><li>Other work hazards associated with this position would be those normally found in a machine shop or factory setting. Should an injury occur, the most likely type of injuries would be cuts or pinched fingers, bruises or potential burns to eyes. </li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

CNC Sheet Metal Fabricator - The Toro Company (2nd Shift)

Production Welder IDay Shift, 6:00 AM-2:30 PM with Overtime as needed, Monday-FridayTypical starting pay, $19.38/hr.-$20.45/hr., based on experienceWhat Can We Give You?Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more!Welder I at Ditch Witch:This employee welds components used to build Ditch Witch equipment. What Will You Do?<ul><li>Read information from blueprints, technical manuals or other documents.</li><li>Set up fixtures, mount parts in fixtures, and perform mechanical assembly. This includes using hand and air tools such as wrenches, torque wrenches, impact wrenches, screwdrivers, hammers, etc.</li><li>Use a hoist to lift and position large, heavier components and completed weldments.</li><li>Set up, adjust, and operate MIG welding equipment to weld machine components.</li><li>Remove components from fixtures, clean and check them for quality, and correct errors or deficiencies of weldments.</li><li>Use a computer to check the location, inventory, routing of parts, and to record inventory transactions.</li></ul>What Do You Need?<ul><li>High School Diploma or equivalent preferred.</li><li>Have appropriate MIG welding experience OR have completed a formal welding training program (or the equivalent in training and experience).</li><li>Pass required entry-level plate test for production welding.</li><li>Have appropriate mechanical skills, including experience using hand and air-powered tools (wrenches, screwdrivers, hammers, etc.).</li><li>Have appropriate reading, clerical, and basic math skills.</li></ul>Work Environment:<ul><li>Manufacturing plant conditions (indoors, with variable temperature, humidity, noise, and dirt).</li><li>Use of personal protective equipment including a welding hood, gloves, and sleeves, safety glasses, face shields and hearing protection.</li><li>Physical hazards such as powered vehicle, bicycle, and pedestrian traffic, sharp objects, moving machinery, electrical arc-welding equipment, and materials handling.</li><li>Working with hazardous materials, including solvents, oils, grease, and pressurized gases.</li><li>An expectation to work at least 50% of Saturdays.</li></ul>Essential Physical Functions:The physical demands for this job are classified as medium and include the following:<ul><li>Be able to handle items weighing over 60 pounds from floor to knuckle.</li><li>Be able to handle pull or push items up to 50 pounds.</li><li>Be able to handle items up to 35 pounds from knuckle to shoulder.</li><li>Be able to handle items up to 25 pounds from shoulder to overhead.</li><li>Job requires frequent walking, twisting, bending, squatting, kneeling, and climbing.</li><li>Job requires continuous walking.</li><li>Job requires occasional sitting and elevated work.</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Day Shift Welder - Ditch Witch

Pay: $20+/hr based on experienceHours: Wednesday - Saturday, 7pm-7amJOB SUMMARY:Responsibilities include all aspects of technical set-up, change overs, minor process adjustments, troubleshooting and adherence to established protocols.  One of the prime responsibilities is to keep lines running efficiently, within Safety, Production and Quality goals.DUTIES & RESPONSIBILITIES:<ul><li>Responsible for all set ups and ensures proper specifications during start-up and product changeovers.</li><li>Participate in daily pre-shift Ergonomic stretches and Kickoff Meetings. </li><li>Ensure that there are no delays in “repair hand-offs” to and from maintenance.</li><li>Responsible for making sure all tooling (including mold wheels) is clean and functional as well as to put away tooling in the correct location.</li><li>Responsible for the safe installation of all tooling.</li><li>Make minor adjustments to the process and inform shift lead and/or process specialist.</li><li>Conduct line audits to ensure line is running in optimal performance.</li><li>Accountable for accurate Production Reports and Quality Documents.</li><li>Monitor equipment and take action when necessary.</li><li>Escalate equipment malfunctions to lead.</li><li>Follow TPM (Total Productive Maintenance) schedules to ensure reliable performance of equipment.</li><li>Work towards meeting all Safety, Quality, Production and Scrap goals.</li><li>Conduct product inspection to maintain established Quality levels.</li><li>Maintain 5s standards of assigned area per site requirements (ensure tools are on their designated place, trash cans are emptied, and desk/work area is left in a clean, orderly manner, etc). </li><li>Works with other team members such as Team Leads, Machine Operators, Maintenance Technicians, and Process Engineers.</li><li>Practices continuous improvement by identifying opportunities for streamlining work and reducing waste including work instructions/training.</li><li>Practice all Health and Safety procedures, policies and practices.</li><li>Other duties may be assigned and not all duties listed might be assigned.</li></ul>EDUCATION/EXPERIENCE:<ul><li>High school diploma/GED required</li><li>Technical Vocational School desired                                   </li><li>Proficient in English language desired</li><li>Minimum 2-4 years related experience in extrusion or plastics processing industry desired</li></ul>SKILLS:<ul><li>Must be able to communicate effectively with team leads and supervisors in coordination with production. </li><li>Knowledge of basic PC functions including Microsoft office and Windows.</li><li>High level of organizational skills. Logs, checklists and inspections records must be maintained orderly and legible.</li><li>High sense of urgency. Escalate potential Safety, Process and/or Quality issues.</li><li>Promotes a positive attitude towards Safety.</li><li>Capacity to work independently as well as within a team-oriented and collaborative environment.</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Extrusion Technician - The Toro Company

Starting Pay: $22+ per hour, based on experience2nd shift: M-F 3p-11:30p<div><div><div><div>The Toro Company is now seeking an Industrial Maintenance Technician. Responsibilities include all aspects of preventative maintenance, troubleshooting and adherence to established protocols.  One of the prime responsibilities is to keep lines running efficiently, within Safety, Production and Quality goals.What will you to: <ul><li>Responsible for performing preventive maintenance (PMs); perform routine checks and inspections to equipment keeping accurate records.</li><li>Inspects Equipment, records transaction and information. Responsible for maintaining tools and equipment in good standing, storage and records.</li><li>Responsible for Updating Technician and Engineers on status of machines, tools and equipment; including new equipment and tools.</li><li>Inspects and performs PM’s as per instruction sheets, and will also report discrepancies to the group leader.</li><li>Assist in keeping inventory and history records updated.</li><li>Observes electrical/mechanical devices in operation, monitors and repairs when required.</li><li>Performs analysis of devices/equipment and identifies root cause for malfunctions.</li><li>Repairs and replaces defective parts. Performs preventive maintenance on specified mechanical devices/equipment when required.</li><li>Performs other duties as assigned or are not included here but are within the context of duties defined.</li><li>Provides emergency/unscheduled repairs of production equipment during production hours which may include nights and weekends .</li><li>Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of production machines.</li><li>Reads and interprets equipment manuals and work orders to perform required maintenance and service.</li><li>Comply with TORO and OSHA Safety and Health rules.</li><li>Research, identify, keep records of individual processes for all repairs through documentation and pictures.</li><li>Maintains equipment through cleaning and painting.</li><li>Maintains equipment by conducting daily, weekly, monthly tasks involving replacing dirty filters, inspections checklists and other prevention activities.</li><li>Knowledge of hand tools and basic power tools.</li></ul>What Will You Need?<ul><li>Preferred skills include industrial maintenance experience, as well as experience with plastic processing equipment</li><li>Must be able to communicate effectively with team leads and supervisors in coordination with production. </li><li>Knowledge of basic PC functions including Microsoft office and Windows.</li><li>High level of organizational skills. Logs, checklists and inspections records must be maintained orderly and legible.</li><li>High sense of urgency. Escalate potential Safety, Process and/or Quality issues.</li><li>Promotes a positive attitude towards Safety.</li><li>Capacity to work independently as well as within a team-oriented and collaborative environment.</li></ul>Essential Physical Function: Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. When performing the duties of this job, the employee is regularly required to walk, stand up to 12 hours a day, use hand to finger, handle or feel, reach with hands and arms, stoop, pull, kneel, crouch or crawl up.  The employee is occasionally required to specific vision abilities including close vision and distance vision.  Use of hands; to extend ones’ arm(s) in any direction and to exert force in order to draw, drag or tug hose and use of repetitive motions of the body.  The employee must be able to lift 25 pounds and frequently lift and /or move up to 50 pounds. . The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.</div></div></div></div>

Industrial Maintenance Technician - The Toro Company

2nd Shift, 3:30 PM-12:00 AM, Monday-FridayTypical starting pay, $22.65/hr.-$28.31/hr., plus $2.50 shift differentialMachinist at Radius:This employee machines parts for weld, machine and drill fixtures. Performs machining for rework of production parts. Machines small orders of low frequency production parts. This employee will operate milling machines, lathes, saws and other specialized equipment. He or she will also perform other duties as assigned.What Will You Do? <ul><li>Read and understand 2D drawings.</li><li>Operate CNC and conventional mills, lathes, etc.</li><li>Work under minimal supervision while handling multiple job requirements.</li><li>Utilize technical information from a variety of sources, including, conversations with engineers, equipment operators, and other tooling personnel, electronic and conventional technical documents.</li><li>Inspect, operate, and help modify tooling.</li><li>Initiate change requests to improve manufacturing processes.</li><li>Use a computer to access the SAP system, keep departmental records and locate drawings.</li></ul>What Do You Need? <ul><li>Have a minimum of three years of machining skills.</li><li>Have a good work record of safety, self-motivation, judgment and productivity.</li><li>Have appropriate reading, clerical, and basic mathematical skills.</li><li>Be able to communicate effectively over the phone and before groups of people.</li><li>Work well with others in both a team setting and one-on-one.</li><li>Be able to regularly handle items weighing up to 25 pounds and occasionally handle items weighing in excess of 50 pounds.</li><li>Able to use measuring tools (rulers, micrometers, calipers, coordinate measuring equipment, etc.) and hand or power tools (hand/air impact wrenches, screwdrivers, etc.).</li><li>Be willing to work overtime as needed.</li></ul>Work Environment: <ul><li>Manufacturing plant conditions (indoors, with variable temperature and humidity, noise, and dirt). Occasional outside work.</li><li>Physical hazards such as powered vehicle, bicycle, and pedestrian traffic, sharp objects, moving machinery, and materials handling.</li><li>Working with hazardous materials, including solvents, oils, grease, and pressurized gases.</li><li>Highly variable duties, workloads, and priorities. Changes often happen with little advance notice.</li><li>A variable work schedule (ranging from 8-12 hours daily with overtime paid after 8 hours per day) and some scheduled work on Saturdays.</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Machinist - Radius HDD

<div>Applicants must be legally authorized to work in the United States. We are unable to sponsor or take over sponsorship of a school/employment visa at this time, regardless of expiration date Who Are We?     BOSS Snowplow, located in Iron Mountain, Michigan is a division of The Toro Company.  BOSS is a leader in the snow and ice management business with a growing lineup of plows for trucks, UTVs and ATVs, salt and sand spreaders, and box plows built for the snow and ice management professional, as well as the homeowner. With a focus on uncompromising quality and high-level craftsmanship, BOSS has grown to be a leader in the sale of truck plows. </div><div>The Mechanical engineer will design, analyze, and project manage new products from conception to production and beyond. Responsibilities include new product development as well as product maintenance and cost improvement for existing products. This person is the center of cross functional team coordination, developing and maintaining engineering project plans, schedules, budgets, and costs. What Will You Do?  In order to grow and build a successful career with The Toro Company, you will be responsible for:  <ul><li>Lead new product development of assigned projects.</li><li>Create marketable ideas for new and revised products.</li><li>Create designs to satisfy the product objectives related to the specific projects assigned.</li><li>Develop project schedules for new product development and continuous improvement projects.</li><li>Assists in and sometimes drives product requirements</li><li>Performs engineering analysis to predict the behavior of a proposed design and resolves design problems. </li><li>Responsible for the entirety of design projects and assures that cost, timing, durability, performance, manufacturability, and quality meet project objectives as well as The Toro Company and Industry Safety Standards.</li><li>Assist in the development of design and test standards. </li><li>Conducts regular design, manufacturability, safety, and serviceability reviews for the assigned areas of design.</li><li>Actively participates and coordinates in the development and understanding of customer requirements through direct contact with marketing, customers, service, manufacturing, and distribution.</li><li>Support Operations during the implementation of new product. </li><li>Support Operations improvements and cost reduction efforts</li><li>May provide work direction and monitor the work of lower level engineers, designers, draftspersons, and experimental shop mechanics assigned to the areas of design responsibility.</li><li>Works with suppliers to insure selection of application approved, quality components.</li><li>Writes project requests, documentation, and manages all activity through release and change management using established Engineering and Development Procedures.</li><li>Keeps manager informed.</li><li>Supports company Quality Policy by working within the documented quality system. </li><li>Participates in quality initiatives and training as needed.  Regularly in communication with global suppliers and partners.</li><li>Coordinate and hold meetings out of normal office hours with suppliers in different time zones as needed.</li><li>Manage project related tasks, issues, and progress with external partners and global teams.</li><li>Address and resolve field/ warranty issues.</li><li>Support the Technical Service Department through direct customer contact.</li></ul></div><div>What Do You Need?  To be considered for this role, an individual should meet the following minimal requirements:<ul><li>Bachelor’s degree in an ABET accredited Mechanical, Electrical, Aeronautical, Agricultural or equivalent engineering program required</li><li>0-2 years experience, preferably in the powered equipment or related industry required (ME I)</li><li>2-4 years’ experience, preferably in the powered equipment or related industry required (ME II)</li><li>5-7 y ears' experience, preferably in the powered equipment or related industry (ME III)</li><li>Must be proficient using solid modeling software (Creo Parametric Preferred), Finite Element Analysis, and Microsoft Office (Word, Excel, and PowerPoint).</li><li>Knowledgeable in Engineering Mechanics, Strength of Materials, welding, and other manufacturing processes</li><li>Experience with electric circuits and powered equipment electrical control systems is highly preferred.</li><li>Basic understanding of hydraulic systems is preferred.</li><li>Mechanical aptitude and hands-on mechanical skills preferred.</li><li>Must have strong analytical and problem-solving skills and attention to detail.</li><li>Must have strong visualization skills.</li><li>Must be able to specify and use test equipment including sensors and data acquisition equipment.</li><li>Must have the ability to manage multiple projects simultaneously in a fast-paced work environment.</li><li>Ability to utilize project management techniques throughout development.</li><li>Skillfully collaborates with cross functional teams and promotes big picture thinking.</li><li>Desire to work in a fast paced, challenging, evolving environment with a team-first mindset</li><li>Drives issue resolution among various engineering groups to keep project on schedule</li><li>Communicates with highly competent written and verbal communication skills.</li><li>Collaborates with Operations and Advanced Manufacturing Engineers to ensure successful production launches of new products and complex product changes.</li></ul>Other Job-Related Components: (e.g., Physical demands, working conditions, travel)<ul><li>Domestic and international travel to test sites, distributors, customers, suppliers, manufacturing facilities and others will be required.</li><li>Design decisions may affect sales, warranty, customer satisfaction, and product safety.</li><li>Keeps abreast of new technological developments, components, concepts, materials, manufacturing processes, or competitive environment, which would affect the design or design process.</li><li>This job is not a remote position</li></ul>What Can We Give You?     At BOSS Snowplow, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits – BOSS Snowplow offers employees at our Iron Mountain location, MI a variety of perks, including:   Dress for your day - We know you're more productive when you're comfortable, which is why employees are encouraged to take advantage of our casual, office-plant blended environment.  Wellness - In addition to physical wellbeing, TTC offers a variety of mental health, financial health, and other types of resources to every full-time employee.  Volunteerism - The Toro Company is proud to provide employees 20 hours of paid time to volunteer in the community.  Growth Opportunities – TTC prides itself on giving our employees the chance to grow their careers. Tuition reimbursement, opportunities to move into new areas of interest, and promotion opportunities are a few examples.   Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between ​$66900​ - ​$115000​. Cash compensation is one piece of our competitive total rewards package. You may be eligible to participate in an incentive program, which rewards employees based on individual and organizational performance. Eligibility and award amounts are determined by company policy and performance metrics. If you need to, you can access your pay early with the One@Work app, formerly the Even app. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees #LI-BOSS Snowplow #LI-Onsite </div>

Mechanical Engineer - BOSS Snowplow

<h2>Who Are We?    </h2><div>At Ditch Witch in Perry, Oklahoma we pride ourselves on being the leading manufacturer in the underground pipe and cable market. Our plant in Perry stands out because it's a place for people to learn and thrive. We enjoy coming to work because our plant is our community, we see our teammates not only as co-workers but as neighbors and family members. All of our locations build the intricate network of machinery that contributes to The Toro Company. We contribute to building communities, cities, and the world.  We invite you to apply and join a team of highly skilled, and highly passionate people. </div><h2>What Will You Do? </h2>You will be responsible for designing solutions or improvements to address current and ongoing issues with underground construction equipment and/or processes.  <h2>What Do You Need? </h2>To be considered for this role, an individual should meet the following minimal requirements: <ul><li>Experience & Education: Mechanical, Electrical or Software Engineering Sophomore or Junior</li><li>Skills:  mechanical design</li><li>Characteristics: confident, resourceful, independent worker.</li></ul><h2>What Can We Give You?    </h2>At The Toro Company, we are always working to make sure our interns know just how valued they are. In addition to a competitive pay- The Toro Company offers interns a variety of perks, including: Dress for your day - We know you're more productive when you're comfortable, which is why TTC employees are encouraged to take advantage of our casual, corporate environment. Volunteerism - The Toro Company is proud to provide interns 8 hours of paid time to volunteer in the community. Competitive Pay – anticipated pay $22 to $28 per hour. Pay is dependent on year completed in school.At The Toro Company, we are committed to fostering a secure and trustworthy recruitment process for our applicants. Recruitment fraud is a potential threat to job seekers, so please be aware that throughout our recruitment process, you’ll never be required to pay any fees or disclose personal financial details when applying to TTC opportunities.  We are proud to be an Equal Opportunity Employer and consider qualified applicants without regard to race, color, religion, sex (including pregnancy and related needs and conditions, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit based factors. We celebrate diversity and are committed to creating an inclusive environment for all employees. #LI-OnSite #LI-DitchWitch

Mechanical Engineering Intern - Ditch Witch

The Toro Company is now hiring a Millwright! Apply now to learn more about this career opportunity!Starting Pay: $27.36-31.33/hour, depending on experience$1.50/hour shift differential for 2nd and 3rd shiftMust be available to work any shiftWho Are We?    The Toro Company is a homegrown, Minnesota-based company that has been in business since 1914. We pride ourselves on providing world class equipment to help maintain the environment that we love, while putting an emphasis on giving back to the communities that surround us. From residential lawns and gardens, to venues such as St. Andrews Links and Target Field, we are a company with a global footprint and a passion for helping people beautify whatever landscape they may be in. With 100 years of operation under our belt and an average employee tenure of 15 years, come find out what makes The Toro Company the best place in the Twin Cities to build a career. What Will You Do? <ul><li>Changes layout of machines and mechanical equipment in plant to meet production specifications using hand, power and precision tools and blueprints, sets up machines when operator is not familiar with set up. </li><li>Repairs machinery, jigs, fixtures and small tools when necessary using hand tools, gas and arc welding equipment and power driven equipment; makes simple jigs and fixtures occasionally to meet specifications. </li><li>Examines machines during periodic service checks, makes adjustments, changes oil  performs other necessary service; performs production machining and welding operations occasionally; makes occasional minor repairs to building. </li><li>Stores equipment, tools, jigs, fixtures or other items in locked location or solid marked location in an orderly fashion; issues items as needed, receives and places items in storage after maintaining tools, by oiling, repairing, sharpening or servicing them for future use.  </li><li>Maintains records of issuance; card file for location, tool number and number of units of each type stored. </li><li>Makes recommendation to supervisor for disposition of work tools, equipment and purchase of same per replacement of additional supply. </li></ul>What do you need?<div>Must be able to read blueprints and use precision measuring devices, responsible for layout and set up according to the specifications; required to visualize, build and maintain jigs per blueprint working to fine tolerances, must be able to set up and operate all machinery and equipment and tools listed; should have theoretical and working knowledge of electricity. </div><div> </div><div>Responsible for maintenance of accurate records of receipt and issue of tools, jigs and equipment; must notify supervisor of shortage or breakage of same; responsible for an orderly arranged tool room of tools, jigs, and fixtures and equipment in good working order; required to accurately address and prepare same for shipment, in order to have them repaired or serviced. </div>BENEFITS: Employees are eligible for benefits the first of the month following their hire date.<ul><li>Medical Insurance</li><li>Dental Insurance</li><li>Vision Insurance</li><li>401k</li><li>10 paid holidays</li><li>Vacation and Sick Leave</li><li>and more</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Millwright

Production Welder INight Shift, 10:00 PM-6:00 AM with Overtime as needed, Sunday-ThursdayTypical starting pay, $19.38/hr.-$20.45/hr., based on experience, plus $2.00 shift differential.What Can We Give You?Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more!Welder I at Ditch Witch:This employee welds components used to build Ditch Witch equipment. What Will You Do?<ul><li>Read information from blueprints, technical manuals or other documents.</li><li>Set up fixtures, mount parts in fixtures, and perform mechanical assembly. This includes using hand and air tools such as wrenches, torque wrenches, impact wrenches, screwdrivers, hammers, etc.</li><li>Use a hoist to lift and position large, heavier components and completed weldments.</li><li>Set up, adjust, and operate MIG welding equipment to weld machine components.</li><li>Remove components from fixtures, clean and check them for quality, and correct errors or deficiencies of weldments.</li><li>Use a computer to check the location, inventory, routing of parts, and to record inventory transactions.</li></ul>What Do You Need?<ul><li>High School Diploma or equivalent preferred.</li><li>Have appropriate MIG welding experience OR have completed a formal welding training program (or the equivalent in training and experience).</li><li>Pass required entry-level plate test for production welding.</li><li>Have appropriate mechanical skills, including experience using hand and air-powered tools (wrenches, screwdrivers, hammers, etc.).</li><li>Have appropriate reading, clerical, and basic math skills.</li></ul>Work Environment:<ul><li>Manufacturing plant conditions (indoors, with variable temperature, humidity, noise, and dirt).</li><li>Use of personal protective equipment including a welding hood, gloves, and sleeves, safety glasses, face shields and hearing protection.</li><li>Physical hazards such as powered vehicle, bicycle, and pedestrian traffic, sharp objects, moving machinery, electrical arc-welding equipment, and materials handling.</li><li>Working with hazardous materials, including solvents, oils, grease, and pressurized gases.</li><li>An expectation to work at least 50% of Saturdays.</li></ul>Essential Physical Functions:The physical demands for this job are classified as medium and include the following:<ul><li>Be able to handle items weighing over 60 pounds from floor to knuckle.</li><li>Be able to handle pull or push items up to 50 pounds.</li><li>Be able to handle items up to 35 pounds from knuckle to shoulder.</li><li>Be able to handle items up to 25 pounds from shoulder to overhead.</li><li>Job requires frequent walking, twisting, bending, squatting, kneeling, and climbing.</li><li>Job requires continuous walking.</li><li>Job requires occasional sitting and elevated work.</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Night Shift Welder - Ditch Witch

Applicants must be legally authorized to work in the United States. We are unable to sponsor or take over sponsorship of a school/employment visa at this time, regardless of expiration date.Who Are We?     At Ditch Witch in Perry, Oklahoma we pride ourselves on being the leading manufacturer in the underground pipe and cable market. Our plant in Perry stands out because it's a place for people to learn and thrive. We enjoy coming to work because our plant is our community, we see our teammates not only as co-workers but as neighbors and family members. All of our locations build the intricate network of machinery that contributes to The Toro Company. We contribute to building communities, cities, and the world.  We invite you to apply and join a team of highly skilled, and highly passionate people. The Power Systems Engineer researches and designs components and power systems for Ditch Witch® products specifically related to the efforts of electrification and alternative energy application. He or she uses CAD equipment to create or modify model files of machine components and systems and works closely with various component suppliers and other engineers that have mechanical, electrical, and/or hydraulic responsibilities.  This employee directs the work of drafter/illustrators, layout personnel, and technicians, and performs other duties as assigned.What Will You Do?  In order to grow and build a successful career with The Toro Company, you will be responsible for:  <ul><li>Provides systems-level direction for the application of new technologies related to alternative energy and electrification across the Ditch Witch® product portfolio.</li><li>Analyzes product and component specifications & performance requirements to determine designs which provide a good balance of performance, functionality, cost & ease of manufacture.</li><li>Directs & physically participates when needed in the construction & testing of prototypes to evaluate the design & functionality of the product.</li><li>Acts as a technical lead for systems design and selection of components related to the application of alternative energy and electrified powertrains.</li><li>Solicits & evaluates input from various sources concerning product design & functionality to meet project & customer requirements & manufacturability of product designs.</li><li>Reviews product design for compliance with standard engineering practices, company & industry standards, customer contact requirements & related specifications.</li><li>Creates, maintains, &/or directs the creation/maintenance of essential design information & documentation including models, drafts, schematics & purchased part documentation as well as supporting technical publications.</li></ul>WORK ENVIRONMENT:<ul><li>Office environment most of the time with regular trips to the shop and outside work.</li><li>Shop and outdoor environments include physical hazards such as utilities (typically gas, electric, and water lines), powered vehicle, bicycle, and pedestrian traffic, sharp objects, and moving machinery.  Outdoor environment includes work in all kinds of weather while operating and demonstrating machinery and construction site conditions such as open excavations, unimproved land, uncompleted structures, etc.</li><li>Working with hazardous materials, including fuels, lubricants, solvents, and batteries.</li><li>Occasional overnight travel. </li><li>Rapidly changing workload, priorities, demands, schedules, and deadlines.</li><li>Regular, continuous use of a personal computer.</li></ul>What Do You Need?  To be considered for this role, an individual should meet the following minimal requirements:  <ul><li>Bachelor of Science degree in an ABET-accredited Mechanical Engineering, Electrical Engineering, Agricultural Engineering, EET or MET, or equivalent program.</li><li>Engineer III – Minimum of 5+ years of experience in a product design or related engineering role.</li><li>Engineer IV – Minimum of 7+ years of experience in a product design or related engineering role.</li><li>Engineer V – Minimum of 10+ years of experience in a product design or related engineering role.</li><li>Experience with the application of alternative energy and/or electrified powertrain systems is preferred.</li><li>Experience with systems design regarding engines, drivetrains, and other conversion of energy for the purposes of machine work is preferred.</li><li>Experience with CAD software & solid modeling.</li><li>Interest in mobile equipment design and operation.</li></ul>What Can We Give You?     At Ditch Witch, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits – Ditch Witch offers employees at our Perry, OK location a variety of perks, including:  Dress for your day - We know you're more productive when you're comfortable, which is why employees are encouraged to take advantage of our casual, office-plant blended environment.  Wellness - In addition to physical wellbeing, TTC offers a variety of mental health, financial health, and other types of resources to every full-time employee.  Growth Opportunities – TTC prides itself on giving our employees the chance to grow their careers. Tuition reimbursement, opportunities to move into new areas of interest, and promotion opportunities are a few examples.   Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between ​$88500​ - ​$150000​. Cash compensation is one piece of our competitive total rewards package. You may be eligible to participate in an incentive program, which rewards employees based on individual and organizational performance. Eligibility and award amounts are determined by company policy and performance metrics. If you need to, you can access your pay early with the One@Work app, formerly the Even app. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees #LI-DitchWitch

Power Systems Engineer - Ditch Witch

<h2>Ditch Witch is now hiring Machine Operators on all shifts. Apply now to learn more about this career opportunity. </h2>Day Shift: $18.30/hour to startEvening & Night Shift: $20.30/hour to startWhat Can We Give You?Medical, Dental, Vision, 401K Matching up to 4%, Life Insurance, Tuition Reimbursement, 10 Paid Holidays, Paid Parental Leave, and more!Machine Operator I at Ditch Witch:This employee will operate one or more of various production machines. Machines operated may include: lathes, mills, drills, saws, automatic welders, benders, punches, shears, flame cuts, hi-definition & plasma, laser, heat treat, shot blast, etc. As a cross-functional team member of this division he or she may also assemble components and perform other duties as assigned.What Will You Do?<div><div><ul><li>Set up, adjust, and operate production equipment while monitoring the performance of the machine and carrying out operations in proper sequence.  </li><li>Set up fixtures, mount parts in fixtures/components, and perform mechanical assembly using hand and air tools (wrenches, torque wrenches, impact wrenches, screwdrivers, hammers, etc.).  </li><li>Use a computer to check the location, inventory, and routing of parts and maintain production records.  </li><li>May read information from blueprints.  </li></ul></div></div><div><div>What Will You Need? </div><div><ul><li></li><li>Be familiar with and have basic experience using mechanical repair and assembly tools including wrenches, screwdrivers, pliers, etc.  </li><li>Have appropriate reading, clerical, and basic math skills including understanding written instructions, maintaining production records, and calculating sums, differences, and fractions.  </li><li>Experience or training in welding, machining, mechanical repair, or metal working machinery operation would be beneficial.   </li></ul></div></div><div><div> </div><div>Work Environment: </div></div><div><ul><li>Manufacturing plant conditions (indoors, with variable temperature and humidity, noise, and dirt).  </li><li>Physical hazards such as powered vehicle, bicycle, and pedestrian traffic, sharp objects, moving machinery, electrical arc-welding equipment, and materials handling.  </li><li>Work with hazardous materials, such as coolant, solvents, oils, grease, & pressurized gases.  </li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.</div>

Production Machining - Ditch Witch

Hours: Night shift of your choice<ul><li>B shift: 6:45p-7am, Sunday - Tuesday or Wednesday</li><li>D shift: 6:45p-7am, Wednesday or Thursday - Saturday</li></ul>Wage: $18+/hrDepartment: Extrusion or Molding Departments based on your previous experience.Job Summary:The Technician, Quality analyzes diverse quality situations to result in solutions, verifying the quality of a variety of parts, products and processes.  Provides guidance to QA team members in establishing quality control techniques for maintaining and improving the quality of manufacturing operations.Job Duties:<ul><li>Sets up and implements quality conformance criteria and control charts and  monitors for adherence to established QA and Toro standards.</li><li>Assists Engineering and Operations in establishing or changing methods, techniques or materials for existing or new apparatus for the control of quality or improvements.</li><li>Inspects parts or products as required and documents and reports findings, testing results and recommendations.</li><li>Conducts sampling and auditing required to confirm adherence to quality procedures.</li><li>Charts data gathered from various quality checks to be used in analysis, decisions and feedback for quality improvements.</li><li>Monitors quarantined inventory levels and manages physical movement, identification and material transfers within SAP.</li></ul>Education:<ul><li>High school diploma or equivalent is required.</li><li>Associates Degree or technical education, equivalency degree preferred.</li></ul>Experience:<ul><li>Five years’ experience in a manufacturing environment.</li><li>Minimum of 3 years using inspection equipment and methodologies within a quality management (QMM) system is required.</li></ul>Skillset Needed:<ul><li>Dimensional/smart scope vision system experience.</li><li>Metrology experience including calipers, micrometers, and other handheld tools.</li><li>Good verbal and written communication skills.</li><li>Basic to intermediate competency level in MS Office.</li><li>Must possess good decision-making abilities.</li><li>Ability to use instruction, training and analytical skills to resolve process issues.</li><li>Ability to maintain composure during stressful situations, remaining focused on the ultimate objective.</li></ul>Work Environment:<ul><li>Manufacturing environment without climate control and is subject to temperatures similar to the outside environment. </li><li>Noise levels within the environment average 85 decibels and personal protective equipment (including hearing protection) is required. </li><li>Regularly works near moving mechanical parts and heat producing equipment.</li></ul>PHYSICAL DEMANDS:<ul><li>Regularly required to stand, walk, sit, use hands, climb or balance, stoop, kneel or crawl.</li><li>Occasional lifting of up to 30 lbs. using proper body mechanics and assistance.</li><li>Required vision abilities include: close vision, distance vision, peripheral vision, depth perception and color vision.</li></ul><div>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.</div>

Quality Technician - The Toro Company

Pay: $16+/hr based on skillsetRESPONSIBILITIES:<ul><li>Build a variety of tools, engineering changes, molds, templates, fixtures and jigs. </li><li>Set-up, adjusts and operates all types of machine shop equipment. Select and lay out materials. </li><li>Draw sketches and calculate dimensions as required. </li><li>Repair or modify existing tools. </li><li>Calculate shrink rate dimensions for different plastics. </li><li>Team player with the ability to work on miniature, close-tolerance parts and fixtures with minimum supervision. </li><li>Train mold technicians to increase their knowledge and skills in the areas of troubleshooting and mold repair techniques. </li><li>Adheres to approved Company, Safety and Department policies and procedures. </li></ul>REQUIREMENTS:<ul><li>High school or equivalent preferred</li><li>Demonstrate acceptable layout welding skills and quality</li><li>Able to communicate effectively over the phone and before small groups of people.</li><li>Demonstrate basic computer skills.</li><li>Have appropriate reading, clerical, and basic mathematical skills.</li></ul>PREFERRED QUALIFICATIONS:<ul><li>1+ yrs. tool & die manufacturing experience</li><li>Related vocational certificate or associates degree</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Tool Maker - The Toro Company

Who Are We? At The Toro Company in Plymouth, WI, we pride ourselves on being a leading distributor for the enterprise. Our distribution center in Plymouth stands as a place for people to learn and thrive. We take pride in the products we package and send out to the customer. We contribute to building communities, cities, and the world.  As the Warehouse Associate​, you will accurately pick parts, sort them for proper customer distribution, and pack them for shipment.Hours: 2nd Shift, Monday - Friday, 3:30pm - 12:00am.Overtime as required (to include occasional Saturdays).Wage: $20.43 per hour.What Will You Do? In order to grow and build a successful career with The Toro Company, you will be responsible for: <ul><li>Pick parts utilizing a variety of processes and procedures including RF scanning</li><li>Responsible for ensuring shipment of correct quantities or part numbers as denoted by customer paperwork</li><li>Troubleshoot and report issues/discrepancies as they occur</li><li>Operate a variety of material handling equipment and/or hand operated equipment in a safe and efficient manner.</li><li>Complete all necessary paperwork and record keeping as required</li><li>Maintain a clean and safe work environment</li><li>Assists in other areas as needed and performs other duties as assigned</li></ul>What Do You Need? To be considered for this role, an individual should meet the following minimal requirements: <ul><li>High School diploma or equivalent.</li><li>Attention to detail.</li><li>Ability to lift 50 pounds</li></ul>What Can We Give You? At The Toro Company, we are always working to make sure our employees know just how valued they are. We offer a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits.At The Toro Company, we are committed to fostering a secure and trustworthy recruitment process for our applicants. Recruitment fraud is a potential threat to job seekers, so please be aware that throughout our recruitment process, you’ll never be required to pay any fees or disclose personal financial details when applying to TTC opportunities.   The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Warehouse Associate - The Toro Company

2nd Shift, 3:30 PM-12:00 AM, Monday-FridayTypical starting pay, $18.39/hr.-$23.00/hr., plus $2.50 shift differentialWelder I at Radius HDD:This employee hand welds components used to build equipment. This employee also assembles equipment and performs other duties as assigned.What Will You Do?<ul><li>Read information from blueprints, technical manuals or other documents.</li><li>Set up fixtures, mount parts in fixtures, and perform mechanical assembly. This includes using hand and air tools such as wrenches, torque wrenches, impact wrenches, screwdrivers, hammers, etc.</li><li>Use a hoist to lift and position large, heavier components and completed weldments.</li><li>Set up, adjust, and operate MIG welding equipment to weld machine components.</li><li>Remove components from fixtures, clean and check them for quality, and correct errors or deficiencies of weldments.</li><li>Use a computer to check the location, inventory, routing of parts, and to record inventory transactions.</li></ul>What Do You Need?<ul><li>High School Diploma or equivalent preferred.</li><li>Have appropriate MIG welding experience OR have completed a formal welding training program (or the equivalent in training and experience).</li><li>Pass required entry-level plate test for production welding.</li><li>Have appropriate mechanical skills, including experience using hand and air-powered tools (wrenches, screwdrivers, hammers, etc.).</li><li>Have appropriate reading, clerical, and basic math skills.</li></ul>Work Environment:<ul><li>Manufacturing plant conditions (indoors, with variable temperature, humidity, noise, and dirt).</li><li>Use of personal protective equipment including a welding hood, gloves, and sleeves, safety glasses, face shields and hearing protection.</li><li>Physical hazards such as powered vehicle, bicycle, and pedestrian traffic, sharp objects, moving machinery, electrical arc-welding equipment, and materials handling.</li><li>Working with hazardous materials, including solvents, oils, grease, and pressurized gases.</li><li>A variable work schedule (ranging from 8-12 hours daily depending on production needs, with overtime paid after 40 hours per week) and some scheduled work on Saturdays.</li></ul>Essential Physical Functions:The physical demands for this job are classified as medium and include the following:<ul><li>Be able to handle items weighing over 60 pounds from floor to knuckle.</li><li>Be able to handle pull or push items up to 50 pounds.</li><li>Be able to handle items up to 35 pounds from knuckle to shoulder.</li><li>Be able to handle items up to 25 pounds from shoulder to overhead.</li><li>Job requires frequent walking, twisting, bending, squatting, kneeling, and climbing.</li><li>Job requires continuous walking.</li><li>Job requires occasional sitting and elevated work.</li></ul>The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Welder - Radius HDD

Learn more about free job search tools, learning opportunities, and exclusive member events.

Discover CareerCircle

Access resources to advance your job search and career growth.

Tools & Training

Explore a wide range of job opportunities that match your skills and career goals.

Search Jobs

Create a professional resume that captures the attention of top employers with our easy-to-use tool.

Resume Builder

Prepare for your next interview with our expert tips and strategies.

Interview Prep

Discover in-depth profiles of leading employers to find your ideal workplace.

Search Companies

Develop in-demand skills with curated courses for today’s job market.

Courses

Access career resources and job postings anytime, anywhere with our app.

Mobile App

Source skilled, diverse talent and build your team.

Talent Acquisition

Access skilled, diverse talent ready to excel via our AI-driven platform, virtual events, and recruitment services.

CareerCircle TalentConnect

Transform your workforce and hiring practices with targeted diversity and disability inclusion trainings.

InclusiveU

Broaden your talent pool with dedicated support for professionals with disabilities.

Getting Hired Powered by CareerCircle

Mission aligned solutions supporting Non-Profit Organizations, Educational Institutions, and Local Workforce Development Boards.

Upskilling & Job Advocacy

Upskilling solutions designed to empower members with in-demand skills training and ongoing support for successful certificate completion.

CareerReady

Job advocacy solutions to connect job seekers to inclusive employers through dedicated recruiting support.

CareerAdvocacy

Learn how we connect underserved communities with careers and build skilled, diverse talent pipelines.

About CareerCircle

Discover answers to common questions and gain insights into our goals and services.

Reach out to us for inquiries, support, or to learn more about our mission and services.

Contact

Explore our blog for latest news and trends for job seekers and employers.

Blog

Access our virtual career fairs, job seeker workshops, and employer focused webinars.

Events

Discover real-life success stories of how we’re transforming lives and building skilled, diverse talent pipelines.

Case Studies

Get the latest news and updates on our mission, partnerships, and community impact.

The Toro Company Jobs

Browse The Toro Company Jobs

JOB SEEKERS

EMPLOYERS

COMMUNITY PARTNERS

ABOUT

RESOURCES