Job Title: WelderJob DescriptionThis role is a hands-on welder position within a manufacturing environment, focused on fabricating and welding frames and structural components from carbon and stainless steel. You will interpret prints and work instructions, prepare materials, and perform high-quality MIG and TIG welds in both horizontal and vertical positions while ensuring accuracy, safety, and structural integrity.Responsibilities<ul><li>Attend a daily shift meeting to review required work, priorities, and production goals.</li><li>Read and interpret prints, blueprints, work instructions, and weld symbols to understand job requirements.</li><li>Select and pick the correct materials and components needed for each job and prepare them for fabrication.</li><li>Buff, clean, and grind parts as needed to ensure proper fit-up and weld quality.</li><li>Set up beams and frames, ensuring they are properly squared and aligned before welding.</li><li>Weld frames and structural units using MIG and TIG processes on 1G carbon and stainless steel.</li><li>Perform both horizontal and vertical welds, including fillet welds and multi-pass welds, to meet quality and structural standards.</li><li>Use a tape measure accurately to verify dimensions and ensure components meet specifications.</li><li>Complete a variety of welds such as fillet welds, butt welds, and cap welds on pipe, ensuring consistency and soundness.</li><li>Inspect completed welds and assemblies for accuracy, quality, and adherence to drawings.</li><li>Maintain a clean and organized work area, including proper handling and storage of materials and equipment.</li><li>Follow all safety procedures and use appropriate personal protective equipment while working in the shop.</li><li>Collaborate with team members and supervisors to resolve issues and ensure efficient workflow.</li></ul>Essential Skills<ul><li>At least 5 years of MIG and TIG welding experience.</li><li>Proficiency performing horizontal and vertical welds on 1G carbon and stainless steel.</li><li>Strong experience with fillet welds and multi-pass welds.</li><li>Ability to read and interpret blueprints, prints, work instructions, and weld symbols.</li><li>Ability to read and use a tape measure accurately.</li><li>Capability to set up and square beams and frames prior to welding.</li><li>Skill in performing fillet welds horizontally and vertically on plates.</li><li>Skill in performing butt welds and cap welds on pipe.</li><li>Ability to pass a weld test that includes fillet welds, butt welds, cap on pipe, and squaring a small section on a high beam in both horizontal and vertical positions.</li><li>Experience using MIG welding and TIG welding processes in a fabrication or manufacturing environment.</li><li>Competence in basic fabrication tasks such as grinding, buffing, and cleaning parts.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience working in a manufacturing or fabrication shop environment.</li><li>Familiarity with structural frames and unit assemblies.</li><li>Comfort working with both carbon steel and stainless steel materials.</li><li>Ability to own and maintain personal welding equipment, including welding jacket, hood, and steel-toe footwear.</li><li>Attention to detail and commitment to producing high-quality welds and assemblies.</li><li>Strong focus on safety and adherence to shop procedures.</li></ul>Why Work Here?This opportunity offers a comprehensive and competitive benefits package designed to support your well-being and long-term security. You can access generous paid time off, including substantial vacation time, dedicated sick time, and floating holidays, allowing you to balance work and personal life. Multiple health plan options give you flexibility in choosing coverage that fits your needs, and a strong 401(k) program with a solid company contribution helps you build your financial future. You will work in a professional environment that values skilled tradespeople and invests in their success.Work EnvironmentYou will work on a first-shift schedule, typically from 5:00 a.m. to 2:30 p.m., Monday through Friday, with some overtime available on weekends as needed. The shop is clean and well lit, providing a comfortable and safe setting for welding and fabrication work. The environment is a manufacturing shop where you will work with welding equipment, fabrication tools, and measuring devices. You are expected to use appropriate personal protective equipment and bring your own welding jacket, hood, and steel-toe footwear in line with standard shop attire.Job Type &amp; LocationThis is a Contract to Hire position based out of Michigan City, IN.Pay and BenefitsThe pay range for this position is $24.00 - $29.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Michigan City,IN.Application DeadlineThis position is anticipated to close on Aug 6, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

public

Welder

Job Title: WelderJob DescriptionJoin a dynamic company specializing in the manufacture, sale, and service of aerial devices, digger derricks, cranes, and specialty equipment for various industries across more than 120 countries. With a recent expansion allowing for over 50% production increase, we are actively seeking skilled MIG welders to join our team.Responsibilities<ul><li>Read and interpret blueprints and weld symbols to determine sequence and methods of assembling components.</li><li>Interpret work orders and utilize basic hand tools such as tape measurers and specialty equipment.</li><li>Operate all equipment within the work area and perform rework as required.</li><li>Support Production System initiatives and participate in continuous improvement events.</li><li>Cross-train and move to other work areas to support production needs.</li><li>Lay out and mark dimensions and reference lines on material using shop math and layout techniques.</li><li>Perform MIG welding using various arc and gas welding equipment.</li><li>Inspect assembly/components for conformance to specifications.</li><li>Trim, file, grind, sand, deburr, buff, and smooth surfaces using hand tools and portable power tools.</li><li>Train new and current associates.</li><li>Follow established safety, environmental, and quality policies, procedures, and practices.</li><li>Maintain work area and shop tools/equipment.</li><li>Maintain daily time records.</li><li>Perform other job duties as assigned.</li></ul>Essential Skills<ul><li>High School Diploma/GED required.</li><li>AWS D.1.1 weld certification required.</li><li>Ability to read, write, and comprehend necessary documentation.</li><li>Basic computer usage knowledge.</li></ul>Additional Skills &amp; Qualifications<ul><li>Vocational training is desired.</li><li>Skills in MIG, TIG, and Flux Core welding.</li><li>Proficiency in blueprint reading and fabrication techniques.</li></ul>Why Work Here?We offer a comprehensive benefits package including medical, dental, and vision insurance, retirement 401(k) program, paid vacation and holidays, flexible spending accounts, life insurance, long-term and short-term disability benefits, tuition reimbursement, wellness rewards program, prescription drug program, employee assistance and mental health/substance abuse program, grants for volunteers, charitable gift matching, and high school achievement awards.Work EnvironmentThis role operates in a manufacturing/production environment that is not climate controlled, fast-paced, and performance-driven. The preferred dress code includes plain colored T-shirts (blue/grey), jeans, and steel-toed footwear. We are seeking welders for various shifts: first shift (6:30am - 3:00pm) and second shift (3:15pm - 11:45pm), with potential work on Saturdays and Friday nights.Job Type &amp; LocationThis is a Contract to Hire position based out of Daleville, VA.Pay and BenefitsThe pay range for this position is $25.09 - $25.09/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Daleville,VA.Application DeadlineThis position is anticipated to close on Aug 1, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis position offers the opportunity to work as a Structural Steel Welder in a high-volume fabrication environment, welding and assembling steel components for commercial, industrial, and infrastructure projects. You will use a variety of welding processes and measuring tools to produce precise, structurally sound products while following strict safety and quality standards.Responsibilities<ul><li>Interpret blueprints, technical drawings, and welding symbols to understand project specifications and requirements.</li><li>Weld structural steel components using MIG, TIG, and Stick welding techniques to produce high-quality, structurally sound welds.</li><li>Perform layout, fitting, and fabrication of steel assemblies according to drawings and specifications.</li><li>Operate cutting, grinding, and welding equipment safely and efficiently to complete fabrication tasks.</li><li>Inspect welds for accuracy, strength, and compliance with applicable industry and project standards.</li><li>Collaborate with engineers, fabricators, and other team members to ensure quality and timely completion of projects.</li><li>Maintain a clean, organized, and safe work area in accordance with safety protocols and company policies.</li><li>Conduct routine maintenance and basic troubleshooting on welding equipment and tools to ensure proper operation.</li></ul>Essential Skills<ul><li>Proficiency in structural steel welding using MIG, TIG, and Stick processes.</li><li>Ability to interpret blueprints, technical drawings, and welding symbols accurately.</li><li>Hands-on experience with structural steel fabrication, including layout and fitting.</li><li>Skilled in the use of measuring tools to ensure precise dimensions and alignment.</li><li>Ability to operate cutting, grinding, and welding equipment safely and efficiently.</li><li>Strong attention to detail with a focus on weld quality and structural integrity.</li><li>Solid understanding of welding safety practices and adherence to safety protocols.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience working in a structural steel fabrication shop environment.</li><li>Familiarity with industry standards related to structural steel welding and fabrication.</li><li>Ability to collaborate effectively with engineers, fabricators, and other team members.</li><li>Strong organizational skills to maintain a clean and efficient work area.</li><li>Mechanical aptitude and ability to perform routine maintenance on welding equipment and tools.</li></ul>Why Work Here?You will join a large, established fabrication operation where you can work on a wide variety of structural steel projects and develop your technical skills in a professional, safety-focused environment. The shop offers exposure to complex, large-scale work, providing opportunities to grow your expertise in welding and fabrication while collaborating with experienced engineers and fabricators.Job Type &amp; LocationThis is a Contract to Hire position based out of Bakersfield, CA.Pay and BenefitsThe pay range for this position is $24.00 - $27.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bakersfield,CA.Application DeadlineThis position is anticipated to close on Aug 5, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderDays and Nights available$22-28/hrJob DescriptionJoin a skilled welding team where you will work on unique trucks and agricultural equipment using MIG, TIG, and pulse welding techniques. This role offers both 1st and 2nd shift opportunities with consistent overtime and the chance to grow your welding skills in a fast-paced, hands-on environment.Responsibilities<ul><li>Perform high-quality welding on trucks and agricultural equipment using MIG, flux core, and, when applicable, pulse MIG and TIG welding processes.</li><li>Interpret and work from blueprints and welding drawings to fabricate and assemble components to specification.</li><li>Set up, operate, and adjust welding equipment and tools to meet job requirements and ensure proper weld penetration and appearance.</li><li>Fabricate parts and structures, including measuring, cutting, fitting, and tacking components prior to final welding.</li><li>Inspect welds and completed assemblies for quality, accuracy, and conformance to standards, making corrections as needed.</li><li>Follow quality control procedures and document work as required to maintain consistent standards.</li><li>Work safely in a mixed indoor/outdoor, non-climate-controlled environment, following all safety guidelines and using required PPE.</li><li>Collaborate with team members and supervisors to meet production goals and manage workload across varying and non-repetitive projects.</li><li>Maintain a clean and organized work area, including proper handling and storage of materials, tools, and equipment.</li></ul>Essential Skills<ul><li>At least 6 months of welding experience in a production, fabrication, or similar environment.</li><li>At least 6 months of blueprint reading experience to accurately interpret weld symbols and fabrication details.</li><li>Proficiency in MIG welding, including setting parameters and producing consistent, structurally sound welds.</li><li>Experience with flux core welding in a fabrication or heavy equipment setting.</li><li>Ability to read and follow detailed instructions, blueprints, and quality standards.</li><li>Strong attention to detail with a focus on producing clean, accurate, and safe welds.</li><li>Capability to work required shifts with regular overtime as scheduled.</li><li>Physical ability to work on and around large trucks and equipment, including standing, bending, and lifting as the job requires.</li></ul>Additional Skills &amp; Qualifications<ul><li>Preferred: At least 6 months of pulse welding experience or demonstrated aptitude and willingness to learn pulse MIG techniques.</li><li>Experience with TIG welding is a plus and can support broader fabrication tasks.</li><li>Experience in fabrication, including layout, fitting, and assembly of steel components.</li><li>Familiarity with quality control practices in a welding or fabrication environment.</li><li>Ability to work independently and as part of a team in a fast-paced setting.</li><li>Strong problem-solving skills and adaptability when working on non-repetitive, custom projects.</li></ul>Why Work Here?You will work on unique, non-repetitive projects where no two trucks or pieces of equipment are exactly the same, keeping the work interesting and challenging. The role offers steady hours with built-in overtime opportunities and an additional hourly premium for 2nd shift. You will have the chance to broaden your welding skill set, including exposure to pulse welding and various fabrication techniques, while contributing to the production of specialized agricultural equipment.Work EnvironmentYou will work in a combination indoor/outdoor, non-climate-controlled environment within an agricultural setting, primarily around trucks and heavy equipment. The position offers both 1st and 2nd shift schedules: 1st shift runs Monday through Thursday from 6:00 AM to 4:30 PM and Friday from 6:00 AM to 2:30 PM, structured as four 10-hour shifts and one 8-hour shift with mandatory 8 hours of overtime on Friday, plus optional overtime on Saturdays from 6:00 AM to 11:00 AM. The 2nd shift runs Monday through Thursday from 5:00 PM to 5:00 AM as four 12-hour shifts, with the 8 hours of overtime included in Thursday’s shift, and optional overtime on Saturdays from 6:00 AM to 11:00 AM. Steel toe boots and jeans are required, and short sleeves are allowed. You will regularly use welding equipment such as MIG, flux core, and pulse MIG machines, along with standard fabrication tools, while working safely around large steel structures and agricultural machinery.Job Type &amp; LocationThis is a Contract to Hire position based out of Blair, NE.Pay and BenefitsThe pay range for this position is $20.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Blair,NE.Application DeadlineThis position is anticipated to close on Jul 28, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderDays and Nights available$22-28/hrJob DescriptionJoin a skilled welding team where you will work on unique trucks and agricultural equipment using MIG, TIG, and pulse welding techniques. This role offers both 1st and 2nd shift opportunities with consistent overtime and the chance to grow your welding skills in a fast-paced, hands-on environment.Responsibilities<ul><li>Perform high-quality welding on trucks and agricultural equipment using MIG, flux core, and, when applicable, pulse MIG and TIG welding processes.</li><li>Interpret and work from blueprints and welding drawings to fabricate and assemble components to specification.</li><li>Set up, operate, and adjust welding equipment and tools to meet job requirements and ensure proper weld penetration and appearance.</li><li>Fabricate parts and structures, including measuring, cutting, fitting, and tacking components prior to final welding.</li><li>Inspect welds and completed assemblies for quality, accuracy, and conformance to standards, making corrections as needed.</li><li>Follow quality control procedures and document work as required to maintain consistent standards.</li><li>Work safely in a mixed indoor/outdoor, non-climate-controlled environment, following all safety guidelines and using required PPE.</li><li>Collaborate with team members and supervisors to meet production goals and manage workload across varying and non-repetitive projects.</li><li>Maintain a clean and organized work area, including proper handling and storage of materials, tools, and equipment.</li></ul>Essential Skills<ul><li>At least 6 months of welding experience in a production, fabrication, or similar environment.</li><li>At least 6 months of blueprint reading experience to accurately interpret weld symbols and fabrication details.</li><li>Proficiency in MIG welding, including setting parameters and producing consistent, structurally sound welds.</li><li>Experience with flux core welding in a fabrication or heavy equipment setting.</li><li>Ability to read and follow detailed instructions, blueprints, and quality standards.</li><li>Strong attention to detail with a focus on producing clean, accurate, and safe welds.</li><li>Capability to work required shifts with regular overtime as scheduled.</li><li>Physical ability to work on and around large trucks and equipment, including standing, bending, and lifting as the job requires.</li></ul>Additional Skills &amp; Qualifications<ul><li>Preferred: At least 6 months of pulse welding experience or demonstrated aptitude and willingness to learn pulse MIG techniques.</li><li>Experience with TIG welding is a plus and can support broader fabrication tasks.</li><li>Experience in fabrication, including layout, fitting, and assembly of steel components.</li><li>Familiarity with quality control practices in a welding or fabrication environment.</li><li>Ability to work independently and as part of a team in a fast-paced setting.</li><li>Strong problem-solving skills and adaptability when working on non-repetitive, custom projects.</li></ul>Why Work Here?You will work on unique, non-repetitive projects where no two trucks or pieces of equipment are exactly the same, keeping the work interesting and challenging. The role offers steady hours with built-in overtime opportunities and an additional hourly premium for 2nd shift. You will have the chance to broaden your welding skill set, including exposure to pulse welding and various fabrication techniques, while contributing to the production of specialized agricultural equipment.Work EnvironmentYou will work in a combination indoor/outdoor, non-climate-controlled environment within an agricultural setting, primarily around trucks and heavy equipment. The position offers both 1st and 2nd shift schedules: 1st shift runs Monday through Thursday from 6:00 AM to 4:30 PM and Friday from 6:00 AM to 2:30 PM, structured as four 10-hour shifts and one 8-hour shift with mandatory 8 hours of overtime on Friday, plus optional overtime on Saturdays from 6:00 AM to 11:00 AM. The 2nd shift runs Monday through Thursday from 5:00 PM to 5:00 AM as four 12-hour shifts, with the 8 hours of overtime included in Thursday’s shift, and optional overtime on Saturdays from 6:00 AM to 11:00 AM. Steel toe boots and jeans are required, and short sleeves are allowed. You will regularly use welding equipment such as MIG, flux core, and pulse MIG machines, along with standard fabrication tools, while working safely around large steel structures and agricultural machinery.Job Type &amp; LocationThis is a Contract to Hire position based out of Blair, NE.Pay and BenefitsThe pay range for this position is $20.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Blair,NE.Application DeadlineThis position is anticipated to close on Jul 29, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h3>Welder – York, PA</h3>Pay: $25–$32/hrSchedule: 1st Shift + Overtime Available<h4>Position Overview</h4>We are seeking skilled Shop and Field Welders to support the fabrication and installation of miscellaneous metals and structural steel. This role offers a mix of shop and local field work with home-daily assignments.<h4>Key Responsibilities</h4><ul><li>Perform high-quality MIG and Stick welding in vertical, overhead, and out-of-position applications</li><li>Fabricate and install railings, stairs, ladders, ramps, platforms, and structural steel components</li><li>Read and interpret blueprints and fabrication drawings</li><li>Take field measurements and assist with layout and installation work</li><li>Ensure quality workmanship and adherence to safety standards</li></ul><h4>Qualifications</h4><ul><li>1–2 years of MIG and Stick welding experience required</li><li>Experience with miscellaneous metals and structural steel preferred</li><li>Ability to weld independently with minimal supervision</li><li>Entry-level welders with co-op or hands-on training will be considered</li><li>Ability to read blueprints and perform accurate measurements</li></ul><h4>What We Offer</h4><ul><li>Competitive pay: $25–$32/hr</li><li>Consistent 1st shift schedule</li><li>Overtime opportunities</li><li>Local field work with home-daily travel</li><li>Opportunity to work on a variety of fabrication and installation projects</li><li>Apply today to join a growing team and build your welding career with competitive pay and steady work.</li></ul>Job Type &amp; LocationThis is a Permanent position based out of East York, PA.Pay and BenefitsThe pay range for this position is $22.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in East York,PA.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis role involves performing high-quality welding using multiple processes in a large, high-volume fabrication environment that produces complex ferrous and non-ferrous metal products. You will interpret blueprints, follow Welding Procedure Specifications, and use various cutting and welding equipment to support a wide range of project-based work.Responsibilities<ul><li>Perform welding using FCAW, GMAW, GTAW and SMAW processes in accordance with established procedures and quality standards.</li><li>Demonstrate advanced proficiency in at least one of the main welding processes and apply that expertise to complex fabrication tasks.</li><li>Set and adjust welding machine parameters with guidance from a supervisor, ensuring proper heat, wire feed, and other critical settings.</li><li>Read and interpret blueprints accurately to determine weld locations, sizes, and sequences.</li><li>Use oxy-fuel, plasma arc, and carbon arc cutting equipment safely and effectively to cut and prepare materials for welding.</li><li>Follow written and verbal instructions from the department supervisor to complete assigned jobs on schedule.</li><li>Apply proper welding techniques to fabricate ferrous and non-ferrous metal components for a variety of project-based work.</li><li>Inspect welds for quality, ensuring adherence to specifications and making adjustments as needed.</li><li>Handle and move materials safely, including lifting up to 50 lbs and positioning parts for welding.</li><li>Maintain a clean and organized work area, following shop safety rules and using appropriate personal protective equipment.</li><li>Adapt to new welding techniques and processes as needed to support evolving production requirements.</li><li>Work extended shifts and overtime as required to meet production demands, particularly on second shift.</li></ul>Essential Skills<ul><li>Understanding of the main welding processes: FCAW, GMAW, GTAW and SMAW.</li><li>Advanced proficiency in at least one of the four primary welding processes.</li><li>Minimum 2 years of MIG welding experience.</li><li>Minimum 2 years of Flux Core welding experience.</li><li>Minimum 2 years of blueprint reading experience.</li><li>Ability to read and interpret blueprints for fabrication and welding.</li><li>Ability to set parameters on welding machines with guidance from a supervisor.</li><li>Ability to understand and follow information listed on Welding Procedure Specifications.</li><li>Proficiency with oxy-fuel, plasma arc and carbon arc cutting equipment.</li><li>High school diploma or equivalent.</li><li>Ability to follow written and verbal directions from a department supervisor.</li><li>Ability to learn and adapt new welding techniques as required.</li><li>Physical ability to lift up to 50 lbs and perform frequent bending, stooping and twisting.</li><li>Ownership of a weld helmet and steel toe boots.</li></ul>Job Type &amp; LocationThis is a Permanent position based out of Alma, MI.Pay and BenefitsThe pay range for this position is $41600.00 - $52000.00/yr.Benefits offered. Shift premium for night shift (once direct). The facility is large, clean, and very well lit.
Huge opportunity due to size, volume of business, and technical positions they require to operate.Workplace TypeThis is a fully onsite position in Alma,MI.Application DeadlineThis position is anticipated to close on Aug 1, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2 style="text-align:center;">Hiring a Welder in Chambersburg, PA </h2>Job DescriptionThe Welder fabricates, assembles, and repairs metal components using a variety of welding techniques while adhering to strict quality, safety, and production standards. This role supports manufacturing operations by producing high-quality welded products, reading and interpreting technical documentation, and maintaining an efficient and organized workflow within the fabrication area.This is a long-term opportunityShift: 1st shift Monday-Friday 6:30am-3pmPay Rate: $22-$26/hour based on experienceBenefits: Medical, dental, vision and 401k planResponsibilities<ul><li>Perform MIG, TIG, Stick, robotic, and other welding processes in accordance with work instructions and engineering drawings.</li><li>Read and interpret blueprints, weld symbols, and fabrication specifications to ensure accurate production of components and assemblies.</li><li>Set up and operate welding equipment, Lincoln welders, robotic welders, hand tools, grinders, cylinders, and related fabrication equipment.</li><li>Measure, cut, fit, and assemble metal components prior to welding using micrometers, calipers, and bore gauges to verify dimensions.</li><li>Perform tack welding and final welding on components and finished assemblies to meet quality and structural requirements.</li><li>Inspect welds for quality, dimensional accuracy, and compliance with company standards and customer specifications.</li></ul>Essential Skills<ul><li>Proficiency in MIG welding with the ability to produce consistent, high-quality welds.</li><li>Ability to read and interpret blueprints, weld symbols, and fabrication specifications accurately.</li><li>Experience setting up and operating Lincoln welders, robotic welding equipment, and standard welding tools.</li></ul>Why Work Here?You join a close-knit, smaller manufacturing team where your contributions have a visible impact on the business. With a stable workload supported by locally awarded projects, you benefit from long-term job security and the opportunity to grow your skills in a supportive, collaborative environment. The company values quality craftsmanship, safety, and continuous improvement, offering a workplace where you can develop professionally while enjoying a reliable schedule and a strong sense of team.Job Type &amp; LocationThis is a Contract to Hire position based out of Chambersburg, PA.Pay and BenefitsThe pay range for this position is $22.00 - $26.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Chambersburg,PA.Application DeadlineThis position is anticipated to close on Aug 4, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>Welder – MIG $24–$26/Hour Vancouver, WA</h2><h3>Job Overview</h3>We are seeking a skilled MIG Welder to join a growing manufacturing team in Vancouver, WA. In this role, you will fabricate and weld a variety of products including playground equipment, site furnishings, outdoor fitness systems, and bicycle security racks. This is an excellent opportunity for welders who take pride in producing high-quality work in a team-oriented shop environment.<h3>Responsibilities</h3><ul><li>Perform MIG welding using short-arc methods with .035" and .045" wire</li><li>Read and interpret blueprints and work instructions</li><li>Fit and assemble components for welding and fabrication</li><li>Inspect welds to ensure quality and adherence to specifications</li><li>Assist with general fabrication and shop duties as needed</li><li>Follow all safety procedures and production requirements</li></ul><h3>Required Qualifications</h3><ul><li>Previous MIG welding experience in a manufacturing or fabrication environment</li><li>Ability to read and interpret blueprints</li><li>Experience fitting and fabricating metal components</li><li>Strong attention to detail and commitment to quality workmanship</li><li>Ability to work effectively in a team environment</li></ul><h3>Preferred Qualifications</h3><ul><li>Experience with TIG welding on stainless steel and/or aluminum</li><li>Custom fabrication or job shop experience</li><li>Flexible, adaptable mindset with a willingness to assist in multiple areas of production</li></ul><h3>Why Join This Team?</h3><ul><li>Competitive pay: $24–$26/hour</li><li>Stable day-shift opportunity</li><li>Hands-on work building unique, custom products</li><li>Collaborative and supportive shop culture</li><li>Opportunity to expand your welding and fabrication skills</li><li>Long-term growth potential with a respected local manufacturer</li></ul><h3>Work Environment</h3>This is a small to mid-sized fabrication and manufacturing facility focused on custom-built products. Team members wear multiple hats and work closely together to ensure quality craftsmanship and efficient production. The environment is fast-paced, hands-on, and ideal for welders who enjoy variety in their work.Apply today and put your welding skills to work building products used in communities across the country.Job Type &amp; LocationThis is a Contract to Hire position based out of Vancouver, WA.Pay and BenefitsThe pay range for this position is $24.00 - $26.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Vancouver,WA.Application DeadlineThis position is anticipated to close on Aug 5, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: MIG WelderJob DescriptionThis role focuses on performing high-quality MIG welding and fabrication on mild steel components, working from detailed blueprints to build structural frames used in demanding applications. You will handle the full welding process from setup and measurement through cutting, fitting, welding, and finishing, contributing to a growing operation that values craftsmanship over simple production welding.Responsibilities<ul><li>Perform MIG welding on mild steel ranging from 12 gauge to 1 inch thickness in flat, vertical down, and overhead positions.</li><li>Set up welding equipment and workstations independently, including Miller welders, to meet job specifications.</li><li>Read and interpret blueprints to understand dimensions, weld symbols, and fabrication requirements.</li><li>Measure, cut, bend, and build frames according to prints, ensuring accuracy and structural integrity.</li><li>Convert decimals to fractions and use a tape measure accurately to 1/16 of an inch.</li><li>Use hand and power tools, tape measures, and other measuring tools to prepare and assemble components.</li><li>Fit and assemble structural and fabricated parts prior to welding, ensuring proper alignment and fit-up.</li><li>Grind and polish welds to meet quality and appearance standards.</li><li>Work with mild steel, flux core, and structural steel materials as required by each project.</li><li>Maintain a safe and organized work area, following shop safety procedures and using required personal protective equipment.</li><li>Collaborate with team members and supervisors to meet production schedules and quality expectations.</li><li>Troubleshoot and adjust welding parameters to ensure proper penetration, bead appearance, and weld strength.</li></ul>Essential Skills<ul><li>MIG welding experience on mild steel, including flat, vertical down, and overhead positions.</li><li>Approximately 5 years of MIG welding experience on mild steel, flux core, and structural steel.</li><li>Ability to set up and operate Miller welders and related welding equipment.</li><li>Blueprint reading skills with at least 3 years of experience interpreting fabrication drawings.</li><li>Proficiency using a tape measure accurately to 1/16 of an inch and converting decimals to fractions.</li><li>Experience in fabrication, including measuring, cutting, bending, fitting, and assembly of frames and structural components.</li><li>Skilled use of hand and power tools, including grinders and other metalworking tools.</li><li>Ability to grind and polish welds to meet quality standards.</li><li>Strong attention to detail and commitment to producing high-quality welds and assemblies.</li><li>Capability to work independently as a complete welder, not limited to repetitive production tasks.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience working in a structural steel or fabrication shop environment.</li><li>Comfort working from start to finish on fabrication projects, including setup, fit-up, welding, and finishing.</li><li>Ability to adapt to changing workloads and priorities in a busy, growing shop.</li><li>Strong communication skills and willingness to collaborate with peers and leadership.</li><li>Interest in long-term growth opportunities within a welding and fabrication-focused organization.</li></ul>Why Work Here?You will join a growing, stable company that supports long-term careers and internal advancement, with many leaders having started on the shop floor. The schedule is built around a 4-day, 10-hour shift model, helping support work-life balance while still offering additional hours when business is strong. The company offers extremely competitive pay for the market, direct hire employment, and incremental pay increases throughout the year based on performance rather than relying solely on annual reviews. Comprehensive benefits include medical coverage with a low deductible and significant employer contribution, as well as dental, vision, life insurance, and a 401(k) plan. Paid time off grows with tenure, with opportunities to earn additional vacation time through strong attendance. The culture is laid back yet professional, with regular company events such as offsite holiday celebrations, lunches every six weeks, and open discussions about business performance and future growth. Employees work in modern, well-equipped facilities, including a new building with ample space, excellent lighting, new machinery, and high ceilings, and they benefit from being part of a mid-sized shop that is actively expanding and investing in its people.Work EnvironmentThis is a 1st shift position operating on a 4-day, 10-hour schedule, typically from 6:00 a.m. to 4:30 p.m., with Fridays generally reserved and used as needed based on workload and optional Saturday work when demand is high. The shop employs roughly 80 people and is planning to grow significantly. Work takes place in a fabrication and welding environment that uses Miller welders, a variety of hand and power tools, and modern machinery in facilities that include a new, spacious building with high ceilings and excellent lighting. The operation is located in an iron works district and is connected to amenities such as a golf simulator and bar, contributing to a relaxed yet focused atmosphere. Personal protective equipment is required, including steel-toed shoes, eye protection, and hearing protection, reflecting a strong emphasis on safety. The environment is described as laid back, with a direct, hands-on leadership style and a culture that encourages growth from within Job Type &amp; LocationThis is a Permanent position based out of Beloit, WI.Pay and BenefitsThe pay range for this position is $45000.00 - $60000.00/yr.4-10 schedule - try to not work OT but currently working some OT 
Growing company - they build parts for Data centers, which that industry is taking off
In the Iron works district - connected to a golf simulator and bar. Their other facility is Brand new facility with tons of space, great lighting, new machinery and high ceilings. They plan to move everything to the new building sometime over the summer of 2025
80 person shop with a lot of growth discussions to get over 100 employees
Welding Manager started as a welder and they moved him into a leadership role. A lot of growth opps at MTL
Laid back environment 
Extremely competitive pay for the market
Direct Hire
$1 for 2nd shift
Annual raises: Don't do a lot of annual raises, they would bump people up throughout the year 
Benefits and insurances: $500 deductible for medical - company pays 65%, dental, vision, life insurance, 401k
Vacation: 1 week after 1 year, 2 weeks after 2, can get an extra week per year based on attendance 
Company outings: Christmas part offsite, full dinner, open bar, door prizes, lunches every 6 weeks. They talk about state of the business and what is going well and not during those 
Growth potential: Steve (Engineering manager), started on shop floor, most supervisors started on the shop floor in a production role
Pay: $25-31/hr and $1 for 2ndWorkplace TypeThis is a fully onsite position in Beloit,WI.Application DeadlineThis position is anticipated to close on Aug 7, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2 style="text-align:center;">Hiring MIG Welders in Snohomish, WA!</h2>📞 To schedule a phone call – Click HereAt least 1 year of job experience OR Completion of a Welding Certification/Education Program is preferredJob DescriptionThe Welder will weld, cut, and braze metal pieces and products by using flame-cutting and hand welding equipment.Responsibilities<ul><li>Plan details of work order procedures; gather required tools and materials based on instructions and specifications provided for the job.</li><li>Operate manual and automated welding units and equipment utilizing wire feed welding techniques.</li><li>Repair and fabricate various items and equipment using blueprints, measuring devices, cutting, burning, and welding techniques and equipment.</li><li>Monitor the welding, burning, and fitting process to ensure parts are not overheated or damaged by warping, distortion, expansion, or shrinkage.</li><li>Prepare, assemble, and tack weld parts and surfaces to be welded.</li><li>Maintain, organize, and clean equipment and the work area.</li><li>Notify supervisor when faulty equipment or defective materials are discovered.</li><li>Conduct quality control evaluations on completed welds.</li></ul>Pay Rate<ul><li>$20 - $30 per hour (depending on experience)</li></ul>Shift <ul><li>6AM - 4:30PM (Mon - Thur) &amp; OT on Fridays</li></ul>Essential Skills<ul><li>Experience with Mig welding, including aluminum and steel welding, with 1-4 years of experience with wire feed welding.</li><li>1-3 years of fabrication with welding and layout experience.</li><li>Knowledge of hydraulics and mechanical systems.</li></ul>Additional Skills &amp; Qualifications<ul><li>Completion of a formal apprenticeship or welding program, or successful completion of an in-company, three-year training program is required.</li><li>1-3 years of mechanical experience with hydraulics is preferred.</li></ul>Why Work Here?Enjoy free unlimited top ramen and oatmeal, as well as fresh popcorn in the break room. Benefit from performance reviews every 90 days with potential pay increases based on attendance and performance.#AerojobsWA26Job Type &amp; LocationThis is a Contract to Hire position based out of Snohomish, WA.Pay and BenefitsThe pay range for this position is $22.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Snohomish,WA.Application DeadlineThis position is anticipated to close on Aug 6, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2 style="text-align:center;">Now Hiring Welder's ASAP in the Area </h2>STARTING RATE OF $28-30/HR!!!Apply now to get an interview lined up quickly!!Job DescriptionThis role focuses on performing high-quality welding work using MIG processes while accurately interpreting blueprints to produce precise and durable welded components. The position requires a safety-conscious professional who can contribute to efficient production and maintain high standards of workmanship.Responsibilities<ul><li>Perform MIG welding on a variety of metal components in accordance with job specifications and quality standards.</li><li>Read and interpret blueprints and technical drawings to understand dimensions, tolerances, and welding requirements.</li><li>Set up, adjust, and operate welding equipment and tools to complete assigned tasks safely and efficiently.</li><li>Inspect welds for accuracy, quality, and structural integrity, and make adjustments or repairs as needed.</li><li>Follow established safety procedures and use appropriate protective equipment while working.</li><li>Maintain a clean and organized work area, ensuring tools and equipment are in proper working condition.</li><li>Collaborate with team members and supervisors to complete projects on time and resolve any production issues.</li><li>Document work performed as required, including any deviations from specifications or rework completed.</li></ul>Work EnvironmentThe position is based in a welding and fabrication environment that involves working with MIG welding equipment, metal components, and standard shop tools. You can expect to spend most of the day on your feet, handling materials, operating welding machinery, and working at welding stations or workbenches. The setting may include moderate noise, sparks, and exposure to typical shop conditions, so appropriate personal protective equipment such as welding helmets, gloves, and protective clothing is required. Work hours are typically structured around regular shop or production schedules, with tasks driven by project timelines and daily production needs.Job Type &amp; LocationThis is a Contract to Hire position based out of Canonsburg, PA.Pay and BenefitsThe pay range for this position is $28.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Canonsburg,PA.Application DeadlineThis position is anticipated to close on Jul 27, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: Welder Job DescriptionThis position is for a MIG Welding role where you will engage in welding various parts using different materials.Responsibilities<ul><li>Weld various parts in different materials.</li><li>Conduct dimensional inspections of parts and check for quality requirements.</li><li>Understand and interpret blueprints and technical drawings.</li><li>Perform grinding, sanding, and cutting using oxy fuel and hand plasma.</li><li>Adhere to lean manufacturing initiatives, quality requirements, and safety programs.</li><li>Perform general welding and shop duties as needed.</li></ul>Essential Skills<ul><li>Proficiency in MIG welding.</li><li>Ability to read and interpret blueprints.</li><li>Experience with stainless steel, carbon steel, and structural welding.</li><li>Knowledge of pre-heat and post-heat welding.</li><li>Experience with carbon arc and stick welding (SMAW).</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in welding Carbon, Stainless, or High Alloy Steels.</li><li>Experience with Flux-Cored Arc Welding (FCAW) and the transfer process.</li><li>Ability to weld thick to thin structural members.</li><li>Strong mechanical aptitude.</li><li>High school diploma or equivalent.</li></ul>Why Work Here?We offer competitive salaries with profit sharing, a comprehensive benefits package including health, dental, vision, and life insurance, a 401(k) plan, tuition reimbursement, paid time off, holidays, a clothing program, a Wellness Program, and abundant opportunities for career growth.Work EnvironmentYou will work in a dynamic environment with the largest Roll Forming &amp; Press Brake machine in the Northern Hemisphere. You will operate under the direction of the Team Manager, safely producing quality parts in a timely manner. There are three large machining centers available, with potential growth opportunities to learn multiple different machining centers.Job Type &amp; LocationThis is a Permanent position based out of Cleveland, OH.Pay and BenefitsThe pay range for this position is $41600.00 - $60320.00/yr.Please ask your recruiter for a copy of this company's benefits overview.Workplace TypeThis is a fully onsite position in Cleveland,OH.Application DeadlineThis position is anticipated to close on Jul 27, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

1st Shift Welder $25-$30/hr!Bucyrus, OHJob DescriptionThis role focuses on welding and assembling dump bodies, ice management systems, and plow equipment onto truck bodies in a busy but small manufacturing shop. You will work across multiple bays, using MIG welding, fabrication equipment, and hand and power tools to install and assemble custom components according to blueprints and measurements.Responsibilities<ul><li>MIG weld cab shields and other components onto truck bodies that are not welded by the manufacturing shop.</li><li>Install dump bodies, plow mounts, plow equipment, and ice management bodies in the heavy bay and other bays as needed.</li><li>Read and interpret blueprints and work instructions to determine welding, fabrication, and installation requirements.</li><li>Measure and mark materials accurately using a tape measure to ensure proper fit and alignment of components.</li><li>Operate fabrication equipment such as a manual brake press, punch press, ironworker, and saws to size, shape, and form metal parts.</li><li>Use hand and power tools to fabricate, assemble, and install components on truck bodies.</li><li>Assist with mechanical assembly tasks related to hydraulic, electrical, or mechanical systems as needed.</li><li>Perform basic machine operation and maintenance tasks to keep equipment in safe working condition.</li><li>Follow all safety procedures and maintain a clean, organized work area in the shop.</li><li>Collaborate with team members across different bays and participate in cross-training to support production needs.</li></ul>Essential Skills<ul><li>MIG welding experience, including welding on mild steel components.</li><li>Ability to read and use a tape measure accurately.</li><li>Blueprint reading experience to support welding, fabrication, and installation work.</li><li>Experience operating band saws and related machine tools.</li><li>Mechanical aptitude with the ability to perform installation and assembly tasks.</li><li>Strong attendance and reliability in a production environment.</li><li>Positive attitude and willingness to work collaboratively with a team.</li><li>At least 1 year of welding experience (does not need to be production or regular experience).</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with hydraulic, electrical, or mechanical assembly or installation (1+ year preferred).</li><li>Experience with electrical maintenance, repair, or machine operation.</li><li>Experience in installation assembly or mechanical assembly in a shop or manufacturing setting.</li><li>Familiarity with using a variety of hand and power tools for fabrication and assembly.</li><li>Comfort working with diesel trucks and related equipment in a shop environment.</li></ul>Why Work Here?The company offers steady work with opportunities for overtime and regular performance-based pay increases, including average annual raises and a 90-day review with potential raises. The environment encourages cross-training, skill development, and long-term stability for individuals who value strong attendance, teamwork, and continuous improvement.Work EnvironmentThis is a shop-based role working primarily on diesel trucks that drive in and out of the facility, so you can expect some fumes and a hands-on, industrial setting. You will work alongside approximately 20 colleagues in the shop, creating a team-oriented environment with active collaboration across different bays. These are first-shift positions with hours from 6:00 a.m. to 4:30 p.m., Monday through Friday. Saturday shifts currently run with the same hours and are mandatory at this time, resulting in an average workweek of 50–55 hours, with the expectation that Saturday work will decrease once the team is fully staffed. The role involves regular use of welding equipment, fabrication machinery, and a wide range of hand and power tools in a physically active setting.Job Type &amp; LocationThis is a Contract to Hire position based out of Bucyrus, OH.Pay and BenefitsThe pay range for this position is $25.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bucyrus,OH.Application DeadlineThis position is anticipated to close on Jul 29, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis role involves performing structural steel fitting and welding duties in a steel fabrication environment. You will work with a variety of welding processes, read and interpret blueprints, and ensure precise measurements while fabricating and fitting structural steel and pipe components.Responsibilities<ul><li>Perform structural steel fitting for a variety of fabrication projects, ensuring components align and fit according to specifications.</li><li>Complete flux core welding on structural and pipe assemblies, following established welding procedures and quality standards.</li><li>Use a tape measure accurately to the 1/16th of an inch to lay out, mark, and verify dimensions on steel and pipe materials.</li><li>Carry, position, and handle materials and components weighing up to 50 lbs safely throughout the workday.</li><li>Perform tack welding to hold components in place prior to final welding and assembly.</li><li>Carry out pipe fitting tasks, including cutting, fitting, and aligning pipe sections for welding and installation.</li><li>Read and interpret blueprints and fabrication drawings to determine measurements, layouts, and welding requirements.</li><li>Use MIG, TIG, and pulse MIG welding processes as required for different materials such as carbon steel, stainless steel, aluminum, and structural steel.</li><li>Operate hand tools and grinding equipment to prepare, finish, and clean welds and fabricated components.</li><li>Work efficiently in a production environment, meeting project deadlines while maintaining high quality and safety standards.</li><li>Collaborate with team members in construction and mechanical fabrication activities to complete projects accurately and on time.</li></ul>Essential Skills<ul><li>1–2 years of experience in structural steel fitting and pipefitting in a fabrication or similar environment.</li><li>Proficiency in structural steel fitting, including layout, alignment, and assembly of steel components.</li><li>Hands-on experience with flux core welding for structural and pipe applications.</li><li>Ability to read and use a tape measure accurately to the 1/16th of an inch.</li><li>Capability to lift and safely handle up to 50 lbs on a regular basis.</li><li>Experience with tack welding to secure components prior to final welds.</li><li>Practical pipe fitting skills, including cutting, fitting, and alignment for welding.</li><li>Blueprint reading skills to interpret fabrication drawings and welding symbols.</li><li>Experience with MIG welding and TIG welding processes.</li><li>Familiarity working with structural steel, stainless steel, carbon steel, aluminum, and sheet metal.</li><li>Ability to use hand tools, grinders, and other common fabrication equipment safely and effectively.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in a production or high-volume fabrication environment.</li><li>Knowledge of pulse MIG welding techniques.</li><li>Previous expericence in construction or mechanical fabrication work.</li><li>Understanding of AWS (American Welding Society) standards and welding best practices.</li><li>Strong attention to detail and commitment to producing high-quality welds and fits.</li><li>Ability to work both independently and as part of a team in a fast-paced setting.</li></ul>Why Work Here?You will join a stable steel fabrication environment where you can apply and grow your welding and fitting skills across a variety of materials and processes. The role offers consistent, full-time hours with opportunities to work overtime, allowing you to build experience and advance your technical abilities. You will work alongside experienced trades professionals in a setting that values safety, craftsmanship, and reliable, high-quality production.Work EnvironmentThis position is based in a steel fabrication facility working with structural steel, stainless steel, carbon steel, aluminum, and sheet metal. You will use welding equipment (including flux core, MIG, TIG, and pulse MIG), hand tools, grinders, and standard fabrication machinery in a production-oriented setting. The schedule typically runs Monday through Thursday from 6:00 a.m. to 4:30 p.m., Friday from 5:00 a.m. to 1:00 p.m., with some Saturdays from 5:00 a.m. to 1:00 p.m. as needed. The environment is industrial and hands-on, requiring appropriate work attire suitable for welding and fabrication, including protective gear and safety equipment.Job Type &amp; LocationThis is a Contract to Hire position based out of Columbia, SC.Pay and BenefitsThe pay range for this position is $20.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Columbia,SC.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis role focuses on fabricating and welding units to precise blueprint specifications to ensure they function safely and effectively. You will interpret technical drawings, prepare and assemble materials, perform high-quality MIG welding, and verify that finished units meet both customer and internal standards. Accurate documentation and collaboration with Quality Control are essential parts of this position.Responsibilities<ul><li>Study blueprints, sketches, and drawings to determine dimensions, tolerances, and setup requirements for each unit.</li><li>Measure, mark, and scribe dimensions on materials or work pieces using tape measures and other tools to ensure accurate fabrication.</li><li>Assemble components and units to match blueprint specifications, ensuring proper fit and alignment before welding.</li><li>Tack pieces together as indicated on the blueprint or as needed to stabilize assemblies prior to final welding.</li><li>Perform MIG welding on components and assemblies to create strong, leak-free welds that ensure units hold liquid without leaks and function properly.</li><li>Grind and finish welds and surfaces as needed to meet quality and safety standards.</li><li>Pre-inspect completed units to verify that customer and company expectations have been met before final quality checks.</li><li>Complete required paperwork and unit labeling, including stamping and other identification processes.</li><li>Ensure each unit is inspected by Quality Control and address any issues or rework identified during inspection.</li><li>Assemble and return all paperwork to the proper location to maintain accurate production records.</li><li>Accurately document all time spent on each unit using the E2 time ticket process or equivalent time-tracking system.</li><li>Maintain a clean and safe work area and follow all safety procedures related to welding, grinding, and working around moving parts.</li><li>Stand, bend, and twist as needed throughout the shift to perform welding and assembly tasks in various positions.</li></ul>Essential Skills<ul><li>At least 1 year of experience working as a welder.</li><li>Proficiency in MIG welding techniques with the ability to produce strong, consistent, and leak-free welds.</li><li>Ability to read and interpret blueprints, sketches, and technical drawings for fabrication and assembly.</li><li>Experience with fabrication processes, including assembling components to specification prior to welding.</li><li>Competence in using a tape measure and other measuring tools to mark and scribe accurate dimensions on materials.</li><li>Skill in grinding and finishing welds and surfaces to meet quality and safety standards.</li><li>Ability to document work time accurately using systems such as the E2 time ticket process or similar.</li><li>Physical ability to bend, twist, and stand throughout the duration of the shift in a production environment.</li><li>Comfort working in an environment with fumes, airborne particles, and moving mechanical parts while following safety protocols.</li></ul>Additional Skills &amp; Qualifications<ul><li>Strong attention to detail when reading blueprints and verifying dimensions and tolerances.</li><li>Ability to work independently and as part of a production team to meet quality and output goals.</li><li>Reliable attendance and a positive attitude that supports a collaborative work culture.</li><li>Willingness to work voluntary overtime when available to support production needs.</li><li>Basic understanding of quality control processes and standards in a manufacturing or fabrication environment.</li></ul>Why Work Here?Employees enjoy a supportive, family-oriented culture where ownership respects team members, actively seeks feedback, and places a strong emphasis on work-life balance. The company offers a productivity bonus structure with voluntary overtime incentives, including a gift card per hour of overtime worked each week, as well as quarterly bonuses based on performance, attendance, and attitude. Team members are appreciated through catered meals for holidays, and earned ESST/PTO accrued while on contract is honored, reflecting a commitment to fairness and employee well-being.Work EnvironmentThe work environment is a busy production setting with moderate to high noise levels depending on the specific area. Temperatures fluctuate with the seasons, so conditions can vary throughout the year. Employees regularly work around fumes or airborne particles and are exposed to moving mechanical parts, making adherence to safety procedures essential. The role involves standing for most of the shift and frequent bending and twisting to perform welding, grinding, and assembly tasks at different workstations.Job Type &amp; LocationThis is a Contract to Hire position based out of Fairmont, MN.Pay and BenefitsThe pay range for this position is $22.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Fairmont,MN.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2 style="text-align:center;">Shipfitter – LOCATED ON SITE IN Charleston, SC - This is a traveling position to Charleston, SC Per Diem Offered</h2><h2 style="text-align:center;">Pay: $45/hr</h2><h2 style="text-align:center;">Per Diem: $140/day (for qualified travelers)</h2><h2 style="text-align:center;">Schedule: Full‑time, long‑term opportunity</h2><h2 style="text-align:center;">NEED SHIPFITTING EXPERIENCE </h2>We are seeking experienced Shipfitters for a major shipbuilding and repair project in the Charleston, SC area. This is a high‑level skilled trade position requiring strong structural fitting experience within shipyard environments.Position OverviewThe Shipfitter will be responsible for fabricating, assembling, and installing structural components on naval and commercial vessels. This role requires precision, the ability to read and interpret blueprints, and experience working in fast‑paced shipyard environments.Responsibilities<ul><li>Layout, fit, and fabricate metal structures according to blueprints and specifications</li><li>Install bulkheads, foundations, decks, frames, and other structural components</li><li>Perform cutting, grinding, burning, and tack welding as needed</li><li>Use measuring tools, levels, squares, and shipyard equipment</li><li>Work safely in confined spaces, at heights, and in various shipyard conditions</li><li>Collaborate with welders, pipefitters, and other trades to complete assigned tasks</li><li>Follow all safety protocols and shipyard procedures</li></ul>Requirements<ul><li>Minimum 5 years of shipfitting experience (required) ON A SHIPYARD PREVIOUSLY</li><li>Strong blueprint reading and layout skills</li><li>Proficiency with hand tools, torches, grinders, and shipyard equipment</li><li>Ability to work in confined spaces and at heights</li><li>Reliable transportation and ability to work full shifts</li><li>Must be able to lift, bend, climb, and perform physical tasks</li></ul>Compensation &amp; Benefits<ul><li>$45 per hour, based on experience</li><li>$140/day per diem for eligible travelers</li><li>Long‑term, stable project</li><li>Overtime opportunities may be available</li></ul>Job Type &amp; LocationThis is a Contract position based out of Goose Creek, SC.Pay and BenefitsThe pay range for this position is $38.00 - $55.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Goose Creek,SC.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionPerform production and maintenance welding on large industrial components, focusing on heavy steel fabrications and machine components that support defense and commercial projects. Operate, monitor, and maintain heat treatment furnaces, ensuring all welding work is completed in accordance with company procedures and specifications. Read blueprints and fabricate components to the required dimensions while maintaining certifications and completing company weld qualification requirements.Responsibilities<ul><li>Perform production and maintenance welding on large industrial components.</li><li>Weld heavy steel fabrications and machine components for defense and commercial projects.</li><li>Operate, monitor, and maintain heat treatment furnaces.</li><li>Complete welding work according to company welding procedures and specifications.</li><li>Read blueprints and fabricate components to required dimensions.</li><li>Maintain certifications and complete company weld qualification requirements.</li></ul>Essential Skills<ul><li>Proficiency in MIG, pulse arc, and flux welding.</li><li>Ability to perform multi-pass fillet and butt welds.</li><li>Comfortable welding in flat, horizontal, vertical, and overhead positions.</li><li>Read and interpret blueprints, sketches, drawings, and templates.</li><li>Use measuring devices and inspection tools to maintain tight tolerances.</li><li>Understand welding procedures, workmanship standards, and quality requirements.</li><li>Ability to work independently while maintaining productivity and safety standards.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in heavy manufacturing, shipbuilding, industrial fabrication, or large-component welding environments preferred.</li><li>Familiarity with NAVSEA, fitting, fabrication, TIG, stick, carbon steel, and Inconel welding.</li><li>High school diploma or GED required.</li><li>3-5 years of heavy industrial welding experience preferred.</li><li>Strong mathematical and measurement skills.</li><li>Ability to lift up to 50 lbs.</li><li>Comfortable working overtime, nights, and weekends when needed.</li><li>Effective verbal and written communication skills.</li><li>Ability to work safely with hand tools, welding equipment, and large industrial machinery.</li></ul>Why Work Here?Enjoy long-term, stable work supporting U.S. defense and submarine programs. Gain the opportunity to work on large, complex industrial projects that most welders never get exposure to. Benefit from extensive overtime opportunities, night shift differential, annual bonus, and profit-sharing potential. Access a 401(k) with company match, medical, dental, and vision coverage, and free medical clinic access. Enjoy PTO, life insurance, disability coverage, and an employee assistance program. Develop highly specialized welding skills in defense manufacturing.Work EnvironmentThis is a night shift position (3rd shift) in a heavy industrial manufacturing environment. Work takes place in a large machine shop and fabrication facility around large steel components, propulsion shafts, and fabricated assemblies. Expect exposure to welding fumes, heat, sparks, and industrial noise, with frequent standing, bending, climbing, kneeling, and overhead work. The team-oriented shop culture involves working alongside machinists, welders, and fabrication personnel in a fast-paced environment focused on quality, safety, and production deadlines.Job Type &amp; LocationThis is a Contract to Hire position based out of North Charleston, SC.Pay and BenefitsThe pay range for this position is $26.00 - $33.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in North Charleston,SC.Application DeadlineThis position is anticipated to close on Aug 3, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>🔥 Welder – $26–$32/hr + Shift Differential 🔥</h1>📍 Elkhorn, NE area | 2nd &amp; 3rd Shift Openings<h2>💰 Pay &amp; Perks</h2><ul><li>$27–$32/hr starting pay</li><li>+$2/hr for 3rd shift</li><li>$175 boot stipend at hire</li><li>Overtime available</li><li>Contract-to-hire with strong benefits</li></ul><hr><h2>🚨 Now Hiring</h2>2nd and 3rd Shift: Entry to experienced<hr><h2>🛠️ Job Duties</h2><ul><li>Perform MIG (GMAW) welding on steel components</li><li>Weld in flat and horizontal positions</li><li>Read blueprints and work orders</li><li>Use cutting equipment (oxy/acetylene, plasma)</li><li>Operate shop equipment and tools</li></ul><hr><h2>✅ Requirements</h2><ul><li>2+ year welding experience/ trade school</li><li>Experience with MIG / Flux-core preferred</li><li>Ability to read measurements and blueprints</li><li>Ability to lift up to 50 lbs</li><li>Strong attendance and safety mindset</li></ul><hr><h2>🌟 Why Apply?</h2><ul><li>Top pay for welders in the area</li><li>Growth opportunities in a large company</li><li>Training and certification support</li><li>Full benefits available</li></ul><hr><h2>🕒 Example Schedule (3rd Shift)</h2>Sunday–Thursday | 11:00 PM – 7:00 AMMonday-Friday 3pm-11pm<hr><h2>📥 Apply Today</h2>Great-paying welding jobs like this don’t stay open long—apply now!Job Type &amp; LocationThis is a Contract to Hire position based out of Valley, NE.Pay and BenefitsThe pay range for this position is $27.00 - $31.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Valley,NE.Application DeadlineThis position is anticipated to close on Aug 4, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>Welder - Up to $33/Hour | 1st &amp; 2nd Shift Available | Career Growth Opportunities</h1><h3>Earn Up to $33/Hour + Annual Bonus Potential</h3>Are you an experienced Structural Welder looking for a long-term opportunity with room to grow? Join a team that builds critical steel bridge structures and offers advancement opportunities into Lead Welder positions.We are currently hiring for both 1st Shift and 2nd Shift Welders. If you have experience with Flux Core MIG Welding, Structural Steel Welding, Blueprint Reading, and Fabrication, we want to hear from you.<h2>Pay &amp; Schedule</h2>💰 Pay: Up to $33/hour✅ Annual Bonus Potential✅ Overtime Opportunities Available1st Shift:<ul><li>Monday-Thursday</li><li>5:30 AM - 4:00 PM</li></ul>2nd Shift:<ul><li>Monday-Thursday</li><li>4:00 PM - 2:30 AM</li></ul>Enjoy a 4-day work week with 3-day weekends every week.<hr><h2>What You'll Do</h2><ul><li>Perform Flux Core MIG welding on structural steel bridge components up to 1/2" thick</li><li>Fabricate and weld steel bridge assemblies from blueprints and specifications</li><li>Complete layout and fitting work using detailed drawings</li><li>Operate overhead cranes and Jib cranes safely</li><li>Use fabrication equipment including:<ul><li>Band saws</li><li>Drill presses</li><li>Stud welders</li><li>Grinders</li></ul></li><li>Weld in multiple positions as required</li><li>Move throughout the fabrication shop to complete projects</li><li>Contribute to high-quality bridge construction projects</li></ul><hr><h2>Required Skills</h2><ul><li>Structural welding experience</li><li>Flux Core MIG welding experience</li><li>Ability to read and interpret blueprints</li><li>Strong fabrication and layout skills</li><li>Ability to work independently with minimal supervision</li><li>Dependable attendance and strong work ethic</li><li>Ability to lift up to 50 lbs regularly</li><li>Ability to kneel, crawl, bend, and work in various welding positions</li></ul><hr><h2>Qualifications</h2><ul><li>Proven experience welding structural steel</li><li>Experience passing welding certifications or weld tests</li><li>Ability to pass:<ul><li>3F Weld Test</li><li>4F Weld Test</li><li>3G Weld Test within the first month</li></ul></li><li>Desire to learn and grow within the organization</li></ul><hr><h2>Why Join Our Team?</h2>✅ Earn up to $33/hour✅ Annual bonus opportunity✅ Both 1st and 2nd shift openings✅ 4-day work week✅ Advancement opportunities into Lead Welder roles✅ Stable, long-term manufacturing environment✅ Work on large-scale bridge fabrication projectsJob Type &amp; LocationThis is a Contract to Hire position based out of Savage, MN.Pay and BenefitsThe pay range for this position is $28.00 - $33.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Savage,MN.Application DeadlineThis position is anticipated to close on Aug 4, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis role focuses on performing high-quality welding and metal fabrication work for custom-built products. You will cut, prepare, and weld mainly steel and aluminum components using a variety of welding processes and tools, ensuring each part meets specifications and quality standards while maintaining a safe and efficient work environment.Responsibilities<ul><li>Use a handheld plasma cutter to cut metal parts, primarily steel and aluminum, according to specifications.</li><li>Grind and smooth edges after cutting using grinders to ensure clean, safe, and accurate finishes.</li><li>Weld identifying marks, typically numbers, onto parts for traceability and identification.</li><li>Perform MIG and Stick welding operations on a variety of metal components.</li><li>Read and interpret blueprints, drawings, and welding procedures to determine job requirements.</li><li>Measure, mark, and lay out materials using templates, patterns, and scribes to prepare for cutting and welding.</li><li>Align and assemble products or structures for welding using cranes, hoists, chains, and related equipment.</li><li>Use cutting or plasma torches to prepare materials to specification prior to welding or fabrication.</li><li>Follow established safety procedures and maintain a clean, safe, and organized work area.</li><li>Work consistent 55+ hour weeks as needed to meet customer deadlines and production schedules.</li><li>Collaborate with team members to ensure custom orders are completed accurately and on time.</li></ul>Essential Skills<ul><li>Proficiency in MIG welding.</li><li>Proficiency in Stick welding.</li><li>Ability to use handheld plasma cutters safely and effectively.</li><li>Experience using grinders to grind and smooth metal edges.</li><li>Ability to read and interpret blueprints, drawings, and welding procedures.</li><li>Blueprint reading skills for fabrication and layout work.</li><li>Ability to measure, mark, and lay out materials using templates, patterns, and scribes.</li><li>Experience with fabrication work in a metalworking or manufacturing environment.</li><li>Ability to align and assemble products or structures using cranes, hoists, chains, and related equipment.</li><li>Strong commitment to consistent attendance, including working 55+ hour weeks when required.</li><li>Understanding of and adherence to safety procedures in a welding and fabrication environment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with TIG welding.</li><li>Experience with flux core welding.</li><li>Previous experience working in a job shop or custom fabrication environment.</li><li>Comfort working with both steel and aluminum materials.</li><li>Ability to work efficiently under time pressure to meet custom order deadlines.</li><li>Strong attention to detail and quality in welding and fabrication work.</li></ul>Why Work Here?You will have the opportunity to work steady first-shift hours with significant overtime potential, allowing you to increase your earnings while building your skills. The environment offers varied, custom work that keeps each day different and engaging, giving you the chance to work on unique projects rather than repetitive production. You will join a team that values reliability, strong work ethic, and craftsmanship, providing a setting where your contributions directly impact customer satisfaction and project success.Work EnvironmentThis role is based in a manufacturing facility that produces construction products such as corrugated piping, operating as a job shop rather than a high-volume production line. Work is driven by custom orders and specific customer requests, so the pace can be demanding with a strong focus on meeting deadlines and delivering on time. The facility is not temperature controlled, so conditions can be very hot during summer months and cold in winter, requiring comfort working in varying temperatures. You will use equipment such as handheld plasma cutters, grinders, welding machines (MIG, Stick, and potentially TIG and flux core), and material handling tools including cranes, hoists, and chains in a busy, hands-on fabrication environment.Job Type &amp; LocationThis is a Contract position based out of Winchester, KY.Pay and BenefitsThe pay range for this position is $20.00 - $20.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Winchester,KY.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionWe are seeking a skilled welder to join our team in fabricating and welding wastewater pumps. The role involves MIG welding on mild steel components and assembling metal parts according to blueprints and specifications.Responsibilities<ul><li>Perform MIG welding on mild steel components for wastewater pump systems.</li><li>Fabricate and assemble metal parts according to blueprints and specifications.</li><li>Measure, cut, grind, and prepare materials for welding and assembly.</li><li>Inspect finished welds to ensure structural integrity and adherence to quality standards.</li><li>Operate fabrication tools such as saws, grinders, and cutting equipment.</li></ul>Essential Skills<ul><li>MIG Welding on Mild Steel: Ability to perform clean, consistent welds with strong structural integrity.</li><li>Fabrication &amp; Blueprint Reading: Experience fabricating parts from raw materials, including interpreting measurements and technical drawings.</li><li>Precision Measurement &amp; Cutting: Skilled in measuring, cutting, and fitting steel components accurately using hand tools and shop equipment.</li></ul>Additional Skills &amp; Qualifications<ul><li>MIG welding experience on mild steel.</li><li>Fabrication experience in a manufacturing environment.</li><li>Ability to read and interpret blueprints and measuring tools (tape measure, calipers, squares).</li><li>Strong attention to detail and commitment to quality.</li><li>Ability to lift materials and stand for extended periods.</li></ul>Work EnvironmentThe work environment is a non-climate controlled outdoor warehouse, requiring adaptability to varying temperatures.Job Type &amp; LocationThis is a Contract to Hire position based out of Edgewater, FL.Pay and BenefitsThe pay range for this position is $23.00 - $29.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Edgewater,FL.Application DeadlineThis position is anticipated to close on Aug 7, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: Welder Job DescriptionThis role involves welding steel components in an industrial manufacturing environment while maintaining high standards of quality, safety, and efficiency. The position suits an experienced welder who is comfortable working with heavy materials, interpreting blueprints, and contributing to a fast-paced production setting.Responsibilities<ul><li>Perform MIG welding on steel and stainless steel components in an industrial manufacturing setting.</li><li>Read and interpret blueprints and technical drawings to determine welding requirements and specifications.</li><li>Set up, operate, and maintain welding equipment and tools according to established procedures and safety standards.</li><li>Fabricate and assemble structural steel parts and production components to meet quality and dimensional requirements.</li><li>Inspect welds for accuracy, quality, and structural integrity, making adjustments as needed to meet standards.</li><li>Handle, position, and secure heavy materials, including lifting up to 50 lbs, to prepare for welding and fabrication.</li><li>Follow all safety guidelines and wear appropriate protective equipment while working with welding tools and heavy materials.</li><li>Maintain a clean, organized, and efficient work area to support smooth production flow.</li><li>Collaborate with production team members to meet daily output targets and ensure timely completion of projects.</li><li>Document work as required and communicate any issues, defects, or equipment concerns to appropriate personnel.</li></ul>Essential Skills<ul><li>Minimum of 1 year of MIG welding experience.</li><li>Experience welding steel and stainless steel materials.</li><li>At least 1 year of experience working in an industrial or manufacturing facility.</li><li>Ability to read and interpret blueprints and technical drawings accurately.</li><li>Knowledge of welding tools, techniques, and safety standards.</li><li>Strong attention to detail and commitment to high-quality workmanship.</li><li>Ability to lift up to 50 lbs and handle heavy materials safely.</li><li>Ability to stand for extended periods while performing welding and fabrication tasks.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in structural steel welding and fabrication.</li><li>Background in production or high-volume manufacturing environments.</li><li>Ability to work efficiently in a fast-paced industrial setting.</li><li>Strong problem-solving skills and the ability to identify and correct welding defects.</li></ul>Why Work Here?You will join a stable industrial manufacturing operation where safety, quality, and teamwork are core values. The role offers consistent daytime hours, allowing for predictable scheduling and a healthy work-life balance. You will have the opportunity to build and refine your welding skills in a professional environment that values craftsmanship, reliability, and continuous improvement.Work EnvironmentThis position is based in an industrial manufacturing facility focused on steel and stainless steel welding and fabrication. The role operates on a first shift schedule, Monday through Thursday from 5:00 a.m. to 3:30 p.m., providing a four-day workweek with long, consistent shifts. You will work around welding equipment, heavy materials, and production machinery, and you will spend most of the day standing and performing hands-on tasks. Proper safety gear and adherence to safety procedures are essential in this environment.Job Type &amp; LocationThis is a Permanent position based out of Dale, WI.Pay and BenefitsThe pay range for this position is $20.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Dale,WI.Application DeadlineThis position is anticipated to close on Jul 30, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: TechnicianJob DescriptionAs a leader in design-build electrical construction and on-demand electrical support, we pride ourselves on being a forward-thinking organization. Our commitment to excellence is reflected in our strong business relationships and continued client loyalty. The role involves working in the warehouse fabrication department, where you will measure and cut materials to specification, as well as perform general labor duties.Responsibilities<ul><li>Measure and cut various materials to specification in the pre-fab department.</li><li>Perform general labor work in the warehouse.</li><li>Utilize hand and power tools for tasks.</li><li>Assist with warehouse operations including loading and palletizing.</li></ul>Essential Skills<ul><li>Proficiency in using a tape measure.</li><li>Experience with electrical work and blueprint reading.</li><li>Ability to operate hand and power tools effectively.</li><li>1+ years of experience utilizing hand tools.</li></ul>Additional Skills &amp; Qualifications<ul><li>Attention to detail is crucial when working on parts for the fabrication department.</li><li>Experience with welding and mechanical construction is a plus.</li><li>Ability to read and interpret blueprints.</li></ul>Why Work Here?This is a contract-to-hire opportunity offering growth within the company. Employees have the chance to transition into field roles, which offer higher pay rates. The company is expanding into new areas and markets, providing ample opportunities for career advancement.Work EnvironmentYou will work in a pre-fab and warehouse environment, which is not climate-controlled but remains comfortable. The shift hours are from 6am to 2:30pm.Job Type &amp; LocationThis is a Contract to Hire position based out of MOORESVILLE, NC.Pay and BenefitsThe pay range for this position is $20.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in MOORESVILLE,NC.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>MIG Welder – $22+/hr + Profit Sharing</h2>Looking for a welding job where your skills are valued and there's real earning potential? We're hiring MIG Welders to join a growing fabrication team. Great opportunity for welders who enjoy hands-on work, building quality products, and learning new skills in the shop.<hr><h3>What You'll Be Doing</h3><ul><li>Perform MIG welding on carbon and stainless steel</li><li>Read and work from blueprints</li><li>Fabricate and assemble metal components</li><li>Use tape measures and other basic measuring tools</li><li>Operate overhead cranes and forklifts as needed</li><li>Assist with brake presses, drill presses, and other shop equipment</li><li>Inspect work and maintain quality standards</li></ul><hr><h3>What We're Looking For</h3><ul><li>6+ months of welding experience or welding school experience</li><li>Ability to read a tape measure</li><li>Ability to read and interpret blueprints</li><li>Strong attention to detail and quality</li></ul><hr><h3>Experience That's a Plus</h3><ul><li>MIG welding experience</li><li>Fabrication experience</li><li>Forklift or overhead crane experience</li><li>Experience with brake presses or other shop equipment</li></ul><hr><h3>Why Apply</h3><ul><li>$22+/hr starting pay with advancement opportunities</li><li>100% employer-paid health insurance upon hire</li><li>Exceptional profit-sharing program</li><li>Overtime opportunities available</li><li>Small team environment where you're more than a number</li><li>Long-term career growth and stability</li></ul><hr><h3>Apply Now</h3><ul><li>Text "WELDER" to 319 252 2304 to get started 🚀</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Cedar Rapids, IA.Pay and BenefitsThe pay range for this position is $20.00 - $20.25/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Cedar Rapids,IA.Application DeadlineThis position is anticipated to close on Aug 2, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

1st Shift Welder $25-$30/hr!Bucyrus, OHJob DescriptionThis role focuses on welding and assembling dump bodies, ice management systems, and plow equipment onto truck bodies in a busy but small manufacturing shop. You will work across multiple bays, using MIG welding, fabrication equipment, and hand and power tools to install and assemble custom components according to blueprints and measurements.Responsibilities<ul><li>MIG weld cab shields and other components onto truck bodies that are not welded by the manufacturing shop.</li><li>Install dump bodies, plow mounts, plow equipment, and ice management bodies in the heavy bay and other bays as needed.</li><li>Read and interpret blueprints and work instructions to determine welding, fabrication, and installation requirements.</li><li>Measure and mark materials accurately using a tape measure to ensure proper fit and alignment of components.</li><li>Operate fabrication equipment such as a manual brake press, punch press, ironworker, and saws to size, shape, and form metal parts.</li><li>Use hand and power tools to fabricate, assemble, and install components on truck bodies.</li><li>Assist with mechanical assembly tasks related to hydraulic, electrical, or mechanical systems as needed.</li><li>Perform basic machine operation and maintenance tasks to keep equipment in safe working condition.</li><li>Follow all safety procedures and maintain a clean, organized work area in the shop.</li><li>Collaborate with team members across different bays and participate in cross-training to support production needs.</li></ul>Essential Skills<ul><li>MIG welding experience, including welding on mild steel components.</li><li>Ability to read and use a tape measure accurately.</li><li>Blueprint reading experience to support welding, fabrication, and installation work.</li><li>Experience operating band saws and related machine tools.</li><li>Mechanical aptitude with the ability to perform installation and assembly tasks.</li><li>Strong attendance and reliability in a production environment.</li><li>Positive attitude and willingness to work collaboratively with a team.</li><li>At least 1 year of welding experience (does not need to be production or regular experience).</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with hydraulic, electrical, or mechanical assembly or installation (1+ year preferred).</li><li>Experience with electrical maintenance, repair, or machine operation.</li><li>Experience in installation assembly or mechanical assembly in a shop or manufacturing setting.</li><li>Familiarity with using a variety of hand and power tools for fabrication and assembly.</li><li>Comfort working with diesel trucks and related equipment in a shop environment.</li></ul>Why Work Here?The company offers steady work with opportunities for overtime and regular performance-based pay increases, including average annual raises and a 90-day review with potential raises. The environment encourages cross-training, skill development, and long-term stability for individuals who value strong attendance, teamwork, and continuous improvement.Work EnvironmentThis is a shop-based role working primarily on diesel trucks that drive in and out of the facility, so you can expect some fumes and a hands-on, industrial setting. You will work alongside approximately 20 colleagues in the shop, creating a team-oriented environment with active collaboration across different bays. These are first-shift positions with hours from 6:00 a.m. to 4:30 p.m., Monday through Friday. Saturday shifts currently run with the same hours and are mandatory at this time, resulting in an average workweek of 50–55 hours, with the expectation that Saturday work will decrease once the team is fully staffed. The role involves regular use of welding equipment, fabrication machinery, and a wide range of hand and power tools in a physically active setting.Job Type &amp; LocationThis is a Contract to Hire position based out of Bucyrus, OH.Pay and BenefitsThe pay range for this position is $25.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bucyrus,OH.Application DeadlineThis position is anticipated to close on Aug 4, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2 style="text-align:center;">Welder's Needed 1st &amp; 2nd Shift </h2><h2 style="text-align:center;">Pay- $20-24/hr!</h2>Job DescriptionWe are seeking a skilled welder to perform Flux Core Welding on mild steel for the construction of barges. The role involves using MIG and TIG welding techniques, interpreting blueprints, and collaborating with a team under the guidance of a supervisor.Responsibilities<ul><li>Perform Flux Core, MIG, and TIG welding on mild steel.</li><li>Read and interpret blueprints accurately.</li><li>Work collaboratively within a team environment under supervision.</li><li>Engage in fabrication and fitting tasks.</li><li>Handle welding of stainless, carbon, and structural steel.</li></ul>Essential Skills<ul><li>Proficient in Flux Core, MIG, and TIG welding.</li><li>Ability to read and interpret blueprints.</li><li>Experience with fabrication and fitting tasks</li><li>Knowledge of welding stainless, carbon, and structural steel.</li></ul>Work EnvironmentThis role requires working in an outdoor environment that can be very hot. The job necessitates wearing steel-toed ankle-high leather boots, long sleeves, and pants. Note that contact lenses are not permitted due to smoke exposure from welding. Work is scheduled in shifts: 1st shift is Monday through Friday, 6:00 AM to 3:30 PM, and 2nd shift is Monday through Friday, 3:15 PM to 12:45 AM.Job Type &amp; LocationThis is a Contract to Hire position based out of Ashland City, TN.Pay and BenefitsThe pay range for this position is $20.30 - $21.30/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Ashland City,TN.Application DeadlineThis position is anticipated to close on Aug 5, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>Hiring Welders Near You – Entry Level Welcome!</h2>Start Your Welding Career with a Company That Invests in YouWhether you're just getting started or have hands-on experience, this is a great opportunity to grow your skills in a clean, team-oriented manufacturing environment. Trade school grads and entry-level welders are encouraged to apply.<hr><h3>Pay &amp; Schedule</h3><ul><li>$21.79/hour + Weekly Pay!</li><li>2nd and 3rd Shift available</li><li>Overtime opportunities available</li></ul><hr><h3>What You’ll Do</h3><ul><li>Perform MIG welding on stainless steel and galvanized materials</li><li>Read and follow blueprints and fabrication drawings</li><li>Use measuring tools to ensure quality and accuracy</li><li>Operate welding equipment and shop tools safely</li><li>Inspect welds and make adjustments as needed</li><li>Follow Lean / 5S practices to keep work areas organized</li><li>Work with a team to hit daily production goals</li></ul><hr><h3>What We’re Looking For</h3><ul><li>Entry-level candidates ready to learn welding</li><li>OR experience with MIG welding (school or on-the-job)</li><li>Ability to read blueprints (or willingness to learn)</li><li>Strong attention to detail and work ethic</li><li>Ability to work in a fast-paced manufacturing environment</li><li>Comfortable working any shift</li></ul><hr><h3>Great Fit For</h3><ul><li>Trade school / welding program graduates</li><li>Candidates with hands-on or shop class experience</li><li>Entry-level workers looking to build a long-term career in manufacturing</li></ul><hr><h3>Why You’ll Love It Here</h3><ul><li>Stable company with 70+ years of industry success</li><li>Strong focus on sustainability and innovation</li><li>Clear path for growth and long-term career advancement</li><li>Full benefits upon hire including:<ul><li>401(k) with match</li><li>Stock options</li><li>Medical benefits starting Day 1</li><li>Paid time off</li></ul></li></ul><hr><h3>Apply Today</h3>Immediate interviews available.Job Type &amp; LocationThis is a Contract to Hire position based out of Milford, DE.Pay and BenefitsThe pay range for this position is $21.79 - $21.79/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Milford,DE.Application DeadlineThis position is anticipated to close on Aug 7, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: Welder Job DescriptionJoin a fast-growing manufacturing facility as a Welder, focusing primarily on MIG welding steel building materials. You will use your welding and fabrication skills to produce high-quality steel components while reading and working from blueprints in a production environment.Responsibilities<ul><li>Perform MIG welding on steel building materials with consistent quality and adherence to specifications.</li><li>Read and interpret blueprints to understand project requirements, measurements, and welding details.</li><li>Use TIG, stick, and flux welding techniques when needed to support fabrication and production tasks.</li><li>Carry out steel fabrication work, including layout, fitting, and preparation of materials for welding.</li><li>Apply spray arc welding methods as appropriate for specific materials and projects.</li><li>Inspect welds and finished parts to ensure they meet quality standards and structural requirements.</li><li>Maintain a clean and organized work area, following safety procedures and facility guidelines.</li><li>Use and care for a personal welding hood and other required protective equipment.</li><li>Collaborate with team members and supervisors to meet production goals and project deadlines.</li><li>Support occasional Saturday work as needed to fulfill production schedules and customer demands.</li></ul>Essential Skills<ul><li>Proven experience with MIG welding on steel materials in a manufacturing or fabrication setting.</li><li>Ability to read and interpret blueprints related to steel structures and building materials.</li><li>Hands-on experience in steel fabrication, including material preparation and fit-up.</li><li>Familiarity with spray arc welding techniques and their application to steel fabrication.</li><li>Capability to work full-time hours with occasional overtime, including some Saturdays.</li><li>Ownership of a welding hood and readiness to use appropriate protective equipment on the job.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with TIG welding is a strong plus.</li><li>Experience with stick welding is a strong plus.</li><li>Experience with flux-core welding is a strong plus.</li><li>Previous work in a manufacturing facility or similar industrial environment is beneficial.</li><li>Ability to work independently and as part of a team in a production-focused setting.</li></ul>Why Work Here?You will join a family-owned company with an excellent culture that values hard work, skill, and dedication. The organization is growing quickly, creating real opportunities for advancement and career development. There is potential for yearly raises, and welders are rewarded based on their performance and expertise, with clear pathways to increase earnings over time.Work EnvironmentThis role is based in a manufacturing facility with a full-time schedule. The standard shift runs Monday through Friday from 6:00 a.m. to 12:00 p.m., followed by a 1-hour lunch, and continues from 1:00 p.m. to 5:00 p.m. Occasional Saturday shifts from 6:00 a.m. to 10:00 a.m. may be required, with an average workload of about 54 hours per week. You will work in an industrial environment around steel fabrication equipment and welding tools, and you are expected to wear and maintain a welding hood and appropriate protective gear in accordance with safety practices.Job Type &amp; LocationThis is a Contract to Hire position based out of Chickasha, OK.Pay and BenefitsThe pay range for this position is $17.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Chickasha,OK.Application DeadlineThis position is anticipated to close on Jul 28, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

1ST SHIFT MIG/TIG WELDING ROLE!Join a great company that does important work and has fun doing it!Job DescriptionJoin a growing metal fabrication team that designs and builds custom dust collection and ventilation systems for heavy manufacturing environments. In this role, you will perform MIG welding and thin-gauge sheet metal fabrication on custom parts and ductwork, working from blueprints to produce high-quality, one-of-a-kind products. This is a hands-on position in a job shop environment with strong potential to transition to a permanent role for the right person.Standard schedule is Monday through Friday starting at 5:00 a.m., with current shifts running approximately 11–12 hours and frequent overtime extending the day to around 4:30–5:30 p.m.Pay: $20-$25/hrResponsibilities<ul><li>Perform MIG welding on custom parts, primarily using thin-gauge sheet metal (approximately 16 to 14 gauge) for dust collection and ventilation systems.</li><li>Weld and fabricate components using carbon steel, and potentially stainless steel, while maintaining strong weld quality on light-gauge materials.</li><li>Read and interpret blueprints and drawings to perform accurate layout, tacking, and welding of seams.</li><li>Measure and mark materials accurately using a tape measure to ensure precise cuts, layouts, and fits.</li><li>Assist fabricators and support the broader production process as needed to keep projects moving efficiently.</li><li>Operate and maintain sheet metal fabrication equipment such as shears, press brakes, grinders, rollers, saws, drills, and plasma cutters.</li><li>Set up and operate press equipment and other metalworking tools safely and effectively.</li><li>Adapt to changing project requirements in a job shop environment, producing a variety of one-off and custom products.</li><li>Cross-train in related fabrication tasks and step into different roles as needed to support the team.</li><li>Follow safety procedures and maintain a clean, organized work area in a busy metal shop environment.</li><li>Work full shifts and overtime as required to meet production schedules and customer deadlines.</li></ul>Essential Skills<ul><li>Solid MIG welding experience in a custom fabrication environment, with at least 2 or more years of hands-on welding preferred.</li><li>Proven ability to weld thin-gauge sheet metal, particularly 16 to 14 gauge materials.</li><li>Ability to read and interpret blueprints and shop drawings for layout and welding tasks.</li><li>Strong tape measure skills and the ability to perform accurate measurements and layouts.</li><li>Experience with thin-gauge metal fabricating, including ductwork and related sheet metal products.</li><li>Comfort working with carbon steel and, when needed, stainless steel materials.</li><li>Ability to operate common metal fabrication tools such as press brakes, shears, grinders, rollers, saws, drills, and plasma cutters.</li><li>Willingness and ability to work 11–12 hour shifts on a Monday through Friday schedule starting at 5:00 a.m.</li><li>Reliable, safety-conscious work habits in a welding and fabrication shop environment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Open to candidates with limited professional experience who have 1–2 years of weld training and a strong desire to grow.</li><li>No formal welding certifications required, but any welding coursework or training is beneficial.</li><li>Background in a job shop environment where products are frequently custom or one-off is a plus.</li><li>Ability to adapt quickly to changing priorities and different product requirements.</li><li>Strong teamwork mindset and willingness to help wherever needed in the shop.</li><li>Motivated, self-directed approach with a focus on quality and continuous improvement.</li></ul>Why Work Here?<ul><li>You will join a driven team in a modern, well-equipped metal shop that values collaboration, cross-training, and professional growth. The culture emphasizes pitching in, learning new skills, and supporting each other to deliver high-quality custom products. There is a strong opportunity to move into a long-term role based on performance, and you will gain diverse experience working on unique, one-of-a-kind projects in a supportive environment.</li></ul>Job Type &amp; LocationThis is a Permanent position based out of Denver, PA.Pay and BenefitsThe pay range for this position is $20.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Denver,PA.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis role involves performing basic MIG welding and fabrication work in a metal construction fabrication environment, following blueprints and customer specifications to produce high-quality parts. You will work closely with production supervisors to meet daily and weekly production goals while maintaining a strong focus on safety and quality standards.Responsibilities<ul><li>Perform daily MIG welding on steel and metal components, with 3/8-inch material being the most common thickness.</li><li>Lay consistent, high-quality weld beads on steel and metal parts according to job requirements.</li><li>Read and interpret blueprints to ensure all parts meet customer specifications and project requirements.</li><li>Work with production supervisors to understand priorities and help achieve production targets and goals.</li><li>Use fabrication equipment, such as brake presses and related tools, to form and fabricate metal components.</li><li>Measure and verify dimensions using calipers and other measuring tools to ensure accuracy and quality.</li><li>Lift and move materials and components weighing up to 50 pounds throughout the workday.</li><li>Follow written and verbal instructions and carry out tasks as directed by supervisors.</li><li>Maintain a strong safety mindset by following all safety procedures, wearing required PPE, and operating equipment safely.</li><li>Adapt to varying daily tasks and projects in a construction fabrication environment where work assignments may change from day to day.</li><li>Keep the work area clean and organized to support safe and efficient operations.</li></ul>Essential Skills<ul><li>At least one year of welding experience or a recent welding certification.</li><li>At least one year of fabrication experience using equipment such as brake presses and related fabrication tools.</li><li>Proficiency in MIG welding on steel and metal components.</li><li>Ability to read and interpret blueprints accurately.</li><li>Ability to use calipers and other measuring tools to verify dimensions.</li><li>Ability to lift up to 50 pounds repeatedly throughout the day.</li><li>Ability to follow instructions and take direction from supervisors.</li><li>Safety-oriented mindset and consistent adherence to safety procedures.</li><li>Capability to work full-time and meet a minimum of 40 hours per week.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience working in a construction fabrication or metal fabrication environment.</li><li>Familiarity with brake press operation and other metal fabrication equipment.</li><li>Comfort working in a non-climate-controlled facility with seasonal temperature changes.</li><li>Strong attention to detail and commitment to producing quality welds and fabricated parts.</li><li>Reliability and punctuality in meeting scheduled hours and production expectations.</li><li>Willingness to work additional overtime hours as desired.</li></ul>Why Work Here?This opportunity offers long-term, stable welding positions with clear room for growth and advancement. After 90 days, you gain flexible access to the facility, allowing you to start earlier or later as long as you complete 40 hours per week. You can take advantage of as much overtime as you want, creating strong earning potential. The environment supports skill development in fabrication and welding, and the variety of tasks keeps the work engaging and dynamic.Work EnvironmentYou will work in an open metal fabrication facility/factory that is non-climate controlled. The environment is decently warm in winter, though it can be cold when shipping doors are open, and warmer in the summer with plenty of airflow. The role is on 1st shift, with core hours from Monday to Friday, 7:00 a.m. to 3:30 p.m., and the expectation to work a minimum of 40 hours weekly, with the option for additional overtime. After 90 days, you will receive a key fob that allows you to start earlier or later while still meeting your weekly hour requirements. Eye protection and hearing protection are provided, and you are required to wear steel-toed boots as part of the dress code. The facility emphasizes safety and the use of appropriate personal protective equipment in a production-focused, hands-on fabrication setting.Job Type &amp; LocationThis is a Contract to Hire position based out of Mankato, MN.Pay and BenefitsThe pay range for this position is $20.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Mankato,MN.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>MIG Welder | 1st Shift | Overtime Available</h1><h2>Build Heavy Equipment That Matters</h2>We’re hiring MIG Welders to join a growing manufacturing team building large industrial equipment. If you’re a hands-on welder who can read prints and take pride in quality work, this is a great opportunity to grow your career in a stable, high-demand environment.<h2>Schedule &amp; Work Environment</h2><ul><li>1st Shift: 6:00 AM – 2:30 PM</li><li>Overtime available based on production needs</li><li>Work in a large manufacturing shop with heavy equipment</li><li>Use of cranes, weld stations, and fabrication tools daily</li></ul><h2>What You’ll Do</h2><ul><li>Perform MIG welding on large machinery and structural components</li><li>Read and interpret blueprints, weld symbols, and shop orders</li><li>Work from assembly prints and pick lists to complete builds accurately</li><li>Operate overhead and jib cranes to safely move materials and finished products</li><li>Weld in multiple positions (flat, vertical, horizontal)</li><li>Inspect your work to ensure quality and minimize scrap</li></ul><h2>What We’re Looking For</h2><ul><li>MIG welding experience</li><li>Ability to read basic blueprints and weld symbols</li><li>Comfort working with measuring tools and fractions</li><li>Ability to weld in multiple positions</li><li>Strong attention to detail and pride in craftsmanship</li></ul><h2>Preferred (Not Required)</h2><ul><li>Experience with heavy or custom fabrication</li><li>Familiarity with overhead cranes</li><li>Experience fitting parts or working with assembly processes</li></ul><h2>Why You’ll Love This Job</h2><ul><li>Competitive pay + consistent overtime opportunities</li><li>Full benefits: health, dental, life insurance</li><li>Tuition reimbursement for continued skill development</li><li>401(k) with company match + HSA/FSA options</li><li>Work on large, complex equipment—not repetitive small parts</li><li>Stable company with long-term career growth opportunities</li></ul><h2>Apply Today</h2>If you're a MIG welder looking for steady hours, overtime, and the chance to work on large-scale equipment in a team environment, we want to hear from youJob Type &amp; LocationThis is a Permanent position based out of Crystal Lake, IL.Pay and BenefitsThe pay range for this position is $37440.00 - $52000.00/yr.Benefits include competitive pay, health, dental and life insurance, tuition reimbursement, 401(K) with company match. 
They also have a HSA and FSA for employees (Benefits are attached). Double Time paid after 50 hours worked.Workplace TypeThis is a fully onsite position in Crystal Lake,IL.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis role focuses on the fabrication and aluminum welding of components for trailers and tankers, using both MIG and TIG processes. You will cut parts to size, interpret blueprints and schematics, and ensure high-quality welds that meet production specifications.Responsibilities<ul><li>Perform aluminum welding using both MIG and TIG processes to fabricate parts for trailers and tankers.</li><li>Cut metal parts to precise size and dimensions according to production requirements.</li><li>Read and interpret blueprints and schematics to determine welding layouts, measurements, and fabrication details.</li><li>Use various hand tools to smooth, grind, and finish welds to meet quality and appearance standards.</li><li>Measure materials accurately using a measuring tape on a daily basis to ensure correct fit and alignment.</li><li>Inspect completed welds and fabricated parts for accuracy, structural integrity, and adherence to specifications.</li><li>Maintain a clean and organized work area to support safety and efficiency in a manufacturing environment.</li><li>Follow all safety procedures and guidelines while operating welding equipment, cutting tools, and hand tools.</li><li>Collaborate with team members and supervisors to meet production schedules and resolve fabrication issues as they arise.</li></ul>Essential Skills<ul><li>Minimum of 3 months of aluminum welding experience.</li><li>Proficiency in MIG welding for aluminum fabrication.</li><li>Proficiency in TIG welding for aluminum fabrication.</li><li>Ability to read and interpret blueprints and schematics for production needs.</li><li>Ability to fabricate and weld components for trailers and tankers.</li><li>Skilled in cutting metal parts to size using appropriate tools and equipment.</li><li>Experience using hand tools to smooth, grind, and finish welds.</li><li>Competent in daily use of a measuring tape for accurate measurements.</li><li>Attention to detail and commitment to producing high-quality welds and fabricated parts.</li></ul>Additional Skills &amp; Qualifications<ul><li>Previous experience working in a manufacturing environment.</li><li>Strong mechanical aptitude and understanding of fabrication processes.</li><li>Ability to work effectively both independently and as part of a production team.</li><li>Willingness to work overtime before shifts and on some Saturdays as needed.</li></ul>Why Work Here?You will join a company that supports your long-term growth with a contract-to-hire opportunity and regular quarterly reviews that provide potential for pay increases. The organization offers a comprehensive benefits package, including a 401(k) with company match, health, medical, and vision insurance with a high employer contribution, life insurance, and paid time off, vacation, and holiday pay. You can build a stable career in a setting that values reliability, development, and work-life balance.Work EnvironmentThis position is based in a manufacturing environment with hands-on fabrication and welding work. The standard schedule is Monday through Friday from 7:00 a.m. to 3:30 p.m., with a 30-minute lunch break. Overtime may be required before the regular shift and on some Saturdays, depending on production demands. You will work with welding equipment, cutting tools, hand tools, and measuring devices in a shop setting that emphasizes safety, organization, and efficient production.Job Type &amp; LocationThis is a Contract to Hire position based out of Billings, MT.Pay and BenefitsThe pay range for this position is $20.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Billings,MT.Application DeadlineThis position is anticipated to close on Aug 3, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>Welding Position - Up to 32/hr -ALL SHIFTS OPEN!! Overtime available</h2>MUST HAVE EXPERIENCE IN THIS FIELD!AFTER APPLYING, MESSAGE MEREDITH @ 513-229-2009****LOCATED IN BATAVIA, OHResponsibilities<ul><li>Perform layout, fitting, and MIG welding on mild steel components used for steel enclosures and diesel fuel oil supply tanks.</li><li>Read and interpret blueprints, shop drawings, and other technical documents to determine welding requirements and fabrication details.</li><li>Use a tape measure accurately to lay out materials, verify dimensions, and ensure parts meet specifications.</li><li>Set up and operate MIG welding equipment in a safe and efficient manner for production work.</li><li>Fabricate and assemble components according to engineering and production requirements.</li><li>Utilize basic hand and power tools to prepare, fit, and finish welded assemblies.</li><li>Follow quality standards and perform visual checks on welds to ensure structural integrity and proper appearance.</li><li>Work effectively in a manufacturing environment and collaborate with team members to meet production goals.</li><li>Successfully complete and pass a MIG weld pressure test as part of the qualification process.</li><li></li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of BATAVIA, OH.Pay and BenefitsThe pay range for this position is $20.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in BATAVIA,OH.Application DeadlineThis position is anticipated to close on Aug 4, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>Hiring MIG Welder – 1st, 2nd &amp; Weekend Shifts</h1><h3>$23–$30/Hour | Career Growth Opportunities</h3><h2>Join a Growing Fabrication &amp; Manufacturing Team</h2>Are you an experienced MIG Welder looking for a long-term opportunity with a company that values quality craftsmanship and professional growth? We are seeking skilled welders to join our expanding team on 1st, 2nd, and Weekend shifts. This role offers the opportunity to work in a modern manufacturing environment where your welding and fabrication skills will play a critical role in producing high-quality products.<hr><h2>Key Responsibilities</h2><ul><li>Perform MIG welding according to engineering drawings, blueprints, and production specifications.</li><li>Read and interpret welding symbols, weld callouts, and fabrication requirements.</li><li>Determine proper weld positions, techniques, and settings to complete projects accurately and efficiently.</li><li>Weld mild steel and stainless steel materials ranging from 7-gauge to 1/4-inch thickness.</li><li>Inspect finished welds to ensure compliance with quality standards and customer specifications.</li><li>Read and interpret detailed fabrication and welding blueprints.</li><li>Assist with cutting, staging, organizing, and preparing materials for fabrication and production.</li></ul><hr><h2>Required Qualifications</h2><ul><li>Minimum of 1 year of MIG welding experience.</li><li>Strong ability to read and interpret blueprints and engineering drawings.</li><li>Knowledge of welding symbols and fabrication specifications.</li><li>Working knowledge of shop math.</li><li>Previous experience in a fabrication or manufacturing environment.</li><li>Ability to produce high-quality welds on both mild steel and stainless steel.</li><li>Strong attention to detail and commitment to workmanship standards.</li><li>Ability to work independently while also contributing to a team-oriented environment.</li></ul><hr><h2>Why Join Us?</h2><ul><li>Competitive pay ranging from $23–$30 per hour, based on experience and skill level.</li><li>Available 1st, 2nd, and Weekend shifts to fit your schedule.</li><li>Opportunity to work in a modern, well-equipped fabrication facility.</li><li>Stable, long-term employment with a company experiencing significant growth.</li><li>Diverse responsibilities that allow you to expand your welding and fabrication skills.</li><li>Collaborative team environment that values safety, quality, and continuous improvement.</li><li>Career advancement opportunities as the organization continues to expand.</li></ul><hr><h2>Work Environment</h2><ul><li>Modern manufacturing and fabrication facility.</li><li>Primarily welding-focused role with opportunities to support fabrication projects.</li><li>Fast-paced, hands-on production environment.</li><li>Team-oriented culture with strong support from leadership and coworkers.</li><li>Growth-focused company investing in its people, equipment, and future success.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Bloomington, MN.Pay and BenefitsThe pay range for this position is $23.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bloomington,MN.Application DeadlineThis position is anticipated to close on Jul 30, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

WELDERLocation: Sioux Falls, SD/Tea, SD Pay: $27/hour Hours: Full-Time, Various Shifts AvailableThis role offers the opportunity to perform high-quality MIG welding on a wide variety of metal parts and products in a dedicated weld shop environment. You will complete welds according to work orders and blueprints, prepare and inspect parts, and help maintain efficient production. The position includes hands-on work with both manual and robotic welding stations, with training provided on robotic equipment as needed.Responsibilities:<ul><li>Identify work in progress using Work Order Cards and sign off operations as complete.</li><li>Complete required welds based on the work list and production priorities.</li><li>Perform MIG welding on metal parts, including the ability to weld 1 to 1.5 inch steel.</li><li>Tack and weld a wide variety of metal parts and products as directed.</li><li>Carry out parts preparation, including scraping, sanding, and grinding.</li></ul>Essential Skills:<ul><li>Minimum of 3 years of MIG welding experience.</li><li>Proficiency in welding 1 to 1.5 inch steel.</li><li>Hands-on experience with MIG welding processes and equipment.</li><li>Ability to read and interpret basic blueprints and drawings.</li></ul>Additional Skills &amp; Qualifications:<ul><li>Experience with robotic welding stations is an advantage; training is available for candidates without prior robotics experience.</li><li>Fabrication and working with stainless steel is beneficial.</li><li>Lead or supervisory experience is preferred but not required.</li><li>Comfort working with department systems and fabrication-related equipment.</li><li>Strong work ethic and reliability in meeting production and quality expectations.</li></ul>Why Work Here?The schedule options provide extended stretches of time off, helping support work-life balance while maintaining full-time hours. As the operation transitions into a new facility, you will be part of a growing environment with modernized space and a strong focus on culture and teamwork.Work Environment:This position is based in a third-party weld shop that produces parts for multiple equipment manufacturers. The environment is hands-on and production-focused, with both manual and robotic welding stations in use. Initially, some roles are in an existing building with a tighter layout, and additional positions will be located in a new facility on the north end of Sioux Falls. Job Type &amp; LocationThis is a Contract to Hire position based out of TEA, SD.Pay and BenefitsThe pay range for this position is $21.00 - $27.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in TEA,SD.Application DeadlineThis position is anticipated to close on Aug 7, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Welder Job Description:If you're looking for a job ASAP and you have Welding Experience then this is the position for you! A popular Manufacturing / Production Company on Front Street is looking for Welders to join the team and perform MIG welds. The company is looking for welders to start right away so Aerotek will provide a rapid interview process so you start work as soon as possible!  Skills:MIG, Welding, Fabrication, Blueprints, Aluminum  Experience Level:Entry-Expert Level Location:Front Street, KCMOPay / Shift:$22 - $251st Shift: 6am-3:30pm Monday-FridayGood Overtime is being offered! Apply right now and expect a call/text from Cole with Aerotek. Positions with this company will be filled quickly!Job Type &amp; LocationThis is a Contract to Hire position based out of KANSAS CITY, MO.Pay and BenefitsThe pay range for this position is $20.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in KANSAS CITY,MO.Application DeadlineThis position is anticipated to close on Jul 27, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>Job Title: Welder</h2>Job DescriptionThis role focuses on welding thin gauge stainless steel for high-quality food, dairy, and pharmaceutical applications while supporting multiple departments as needed. You will interpret blueprints, perform precision fabrication tasks, and help maintain a clean, safe, and efficient work area in a modern facility.Responsibilities<ul><li>Perform TIG &amp; Mig welding on thin gauge stainless steel, typically around 16 gauge, for dairy, pharmaceutical, food, and beverage products.</li><li>Work directly from blueprints, reading and interpreting drawings, welding symbols, and process specifications to complete projects accurately.</li><li>Use fabrication equipment as needed, including grinding and polishing tools, and assist with brake press and other fabrication operations when staffing requires.</li><li>Grind and polish small welds using hand and power tools to achieve required finishes and meet food-grade or sanitary standards.</li><li>Operate manual or semi-automatic welding equipment to fuse metal segments according to established procedures and quality requirements.</li><li>Support the production of food and beverage equipment such as cabinet washers, tanks, pressure systems, tunnel washers, and related stainless steel products.</li><li>Set up welding equipment and accessories independently to ensure proper parameters for each job.</li><li>Clean and maintain the work area, tools, and equipment to promote safety, organization, and consistent quality.</li><li>Collaborate with team members across multiple departments to meet production goals and respond to changing workload needs.</li><li>Follow all safety guidelines and contribute to a culture focused on doing what is right and delivering consistent quality.</li></ul>Why Work Here?The organization offers competitive pay raises, strong benefits and insurance, and a culture grounded in doing what is right, putting customers first, focusing on safety, committing to continuous improvement, and delivering consistent quality. This well-rounded welding and fabrication role provides excellent experience that enhances your resume and supports your long-term career growth.Work EnvironmentThe role follows a 1st shift schedule of four 10-hour days, typically 5:00 a.m. to 3:00 p.m., with flexible start times available at 4:00 a.m., 5:00 a.m., or 6:00 a.m. Voluntary overtime is often available on Fridays for an additional 5 to 10 hours. You will work with stainless steel TIG welding equipment, fabrication tools, and various manual and semi-automatic machines in a clean, organized environment. The culture emphasizes safety, continuous improvement, and consistent quality, with a strong focus on doing what is right and putting customers first. Job Type &amp; LocationThis is a Permanent position based out of Sun Prairie, WI.Pay and BenefitsThe pay range for this position is $62400.00 - $90000.00/yr.Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:• Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Sun Prairie,WI.Application DeadlineThis position is anticipated to close on Jul 28, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>Welding Position - Up to 32/hr -ALL SHIFTS OPEN!! Overtime available </h2>MUST HAVE EXPERIENCE IN THIS FIELD! LOCATED IN BATAVIA, OHResponsibilities<ul><li>Perform layout, fitting, and MIG welding on mild steel components used for steel enclosures and diesel fuel oil supply tanks.</li><li>Read and interpret blueprints, shop drawings, and other technical documents to determine welding requirements and fabrication details.</li><li>Use a tape measure accurately to lay out materials, verify dimensions, and ensure parts meet specifications.</li><li>Set up and operate MIG welding equipment in a safe and efficient manner for production work.</li><li>Fabricate and assemble components according to engineering and production requirements.</li><li>Utilize basic hand and power tools to prepare, fit, and finish welded assemblies.</li><li>Follow quality standards and perform visual checks on welds to ensure structural integrity and proper appearance.</li><li>Work effectively in a manufacturing environment and collaborate with team members to meet production goals.</li><li>Successfully complete and pass a MIG weld pressure test as part of the qualification process.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of BATAVIA, OH.Pay and BenefitsThe pay range for this position is $20.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in BATAVIA,OH.Application DeadlineThis position is anticipated to close on Jul 30, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>MIG Welder | 1st Shift | Overtime Available</h1><h2>Build Heavy Equipment That Matters</h2>We’re hiring MIG Welders to join a growing manufacturing team building small and large industrial equipment. If you’re a hands-on welder who can read prints and take pride in quality work, this is a great opportunity to grow your career in a stable, high-demand environment.<h2>Schedule &amp; Work Environment</h2><ul><li>1st Shift: 6:00 AM – 2:30 PM</li><li>Overtime available based on production needs</li><li>Work in a large manufacturing shop with heavy equipment</li><li>Use of cranes, weld stations, and fabrication tools daily</li></ul><h2>What You’ll Do</h2><ul><li>Perform MIG welding on small and large machinery and structural components</li><li>Read and interpret blueprints, weld symbols, and shop orders</li><li>Work from assembly prints and pick lists to complete builds accurately</li><li>Operate overhead and jib cranes to safely move materials and finished products</li><li>Weld in multiple positions (flat, vertical, horizontal)</li><li>Inspect your work to ensure quality and minimize scrap</li></ul><h2>What We’re Looking For</h2><ul><li>MIG welding experience (or recent welding school grads welcome)</li><li>Ability to read basic blueprints and weld symbols</li><li>Comfort working with measuring tools and fractions</li><li>Ability to weld in multiple positions</li><li>Strong attention to detail and pride in craftsmanship</li></ul><h2>Preferred (Not Required)</h2><ul><li>Experience with heavy or custom fabrication</li><li>Familiarity with overhead cranes</li><li>Experience fitting parts or working with assembly processes</li></ul><h2>Why You’ll Love This Job</h2><ul><li>Competitive pay + consistent overtime opportunities</li><li>Full benefits: health, dental, life insurance</li><li>Tuition reimbursement for continued skill development</li><li>401(k) with company match + HSA/FSA options</li><li>Work on large, complex equipment—not repetitive small parts</li><li>Stable company with long-term career growth opportunities</li></ul><h2>Apply Today</h2>If you're a MIG welder looking for steady hours, overtime, and the chance to work on large-scale equipment in a team environment, we want to hear from youJob Type &amp; LocationThis is a Permanent position based out of Crystal Lake, IL.Pay and BenefitsThe pay range for this position is $37440.00 - $56160.00/yr.Benefits include competitive pay, health, dental and life insurance, tuition reimbursement, 401(K) with company match. 
They also have a HSA and FSA for employees (Benefits are attached). Double Time paid after 50 hours worked.Workplace TypeThis is a fully onsite position in Crystal Lake,IL.Application DeadlineThis position is anticipated to close on Jul 30, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: MIG Welder / Fabrication TechnicianJob DescriptionThis role focuses on MIG and flux core welding of primarily mild steel components, operating fabrication equipment, and assisting with production processes in a small, quiet shop environment. You will interpret blueprints, weld in all positions, and help ensure that finished products meet quality and safety standards while working closely with a small team on a single shift schedule.Responsibilities<ul><li>Perform MIG and flux core welding on primarily mild steel components (approximately 90% mild steel and 10% other materials).</li><li>Read and interpret blueprints to understand project specifications and ensure accurate fabrication.</li><li>Weld in all positions to complete a variety of fabrication and production tasks.</li><li>Operate fabrication machinery, including brake presses and shears, to assist in the production process.</li><li>Assemble materials and equipment as required to support production and fabrication activities.</li><li>Inspect finished products for defects and verify that they meet quality and safety standards.</li><li>Assist in loading raw materials onto production lines and transporting raw materials within the facility.</li><li>Lift and move materials weighing up to 50 pounds as part of daily tasks.</li><li>Work in pairs and collaborate with team members to complete jobs efficiently and safely.</li><li>Follow attendance and workplace policies, including adherence to the established strike-based attendance system.</li></ul>Essential Skills<ul><li>3+ years of MIG welding experience.</li><li>Proficiency in MIG welding and flux core welding.</li><li>Ability to weld in all positions.</li><li>Experience with metal fabrication processes.</li><li>Ability to read and interpret blueprints.</li><li>Skill in operating fabrication equipment such as brake presses and shears.</li><li>Capability to inspect finished products for defects and quality issues.</li><li>Ability to lift up to 50 pounds safely and repeatedly.</li><li>Strong attention to detail and commitment to safety and quality standards.</li></ul>Additional Skills &amp; Qualifications<ul><li>Degree in a related field is a nice to have but not required.</li><li>Comfort working in pairs and collaborating in a small team environment.</li><li>Willingness to learn new equipment and processes as the shop adds newer machines.</li><li>Reliability and consistency in attendance, with the ability to adhere to a strike-based attendance policy.</li></ul>Why Work Here?You will join a workplace that invests in its people and equipment, offering flexible benefits, retirement savings support, and clear opportunities for growth. The benefits package allows you to select only the coverage you need, and a 401(k) program with matching contributions helps you build long-term financial security. Paid time off increases with tenure, including multiple weeks of PTO over time, eight paid holidays, and floating holidays that can be used to create a day off nearly every month. The organization supports your development with tuition reimbursement and encourages safety by providing an annual allowance for safety-related purchases such as steel-toe footwear and protective eyewear, as well as supplying most required gear. You can explore growth opportunities by moving into other departments if you want to learn new skills, and you will benefit from working with newer machines in a shop that continues to invest in modern equipment.Work EnvironmentThe work environment offers a small shop feel, with around 13 people on the floor including leadership, creating a close-knit and collaborative atmosphere. The facility is described as not super dirty and relatively quiet compared to many industrial settings. Team members typically work in pairs, fostering cooperation and support on the floor. The operation currently runs a single shift, with first shift hours from Monday through Thursday, 5:30 a.m. to 3:30 p.m. Overtime is available on Fridays, typically between 5 and 8 hours; overtime is voluntary at present, but may become mandatory if there are not enough volunteers. The shop uses fabrication equipment such as brake presses and shears, along with multiple newer machines that have been added in the last two years. Safety is emphasized, with most equipment and protective gear provided, and an annual safety allowance to help cover items like steel-toe footwear and safety glasses. Attendance is managed through a three-strike system, where an initial call-in counts as a warning and subsequent occurrences accrue points.Job Type &amp; LocationThis is a Permanent position based out of Ixonia, WI.Pay and BenefitsThe pay range for this position is $52000.00 - $62400.00/yr.Benefits/Insurance - sign up for what you need rather than having to sign up for everything 
401k, 3% match (if you're contributing 100%) 2% (if you're contributing 50%) 
PTO: 1 week after 1 year, 2 weeks after 2 years, 3 weeks after 5 years, 4 weeks after 10 years 
(PTO is prorated based on when you start) 
8 paid holidays, use the floating holidays so you get one day off a month from a holiday 
Tuition Reimbursment 
Each year you get $100 to spend on anything safety related (steel toes, glasses, etc.) 
Provide everything besides weld helmet and steel toes 

Growth opportunities - able to move to other departments if you're interested in learning something new

Putting a lot of money into newer machines, within the last two years there's been 3 new machines addedWorkplace TypeThis is a fully onsite position in Ixonia,WI.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2 style="text-align:center;">Shipfitter – LOCATED ON SITE IN Charleston, SC - This is a traveling position to Charleston, SC Per Diem Offered</h2><h2 style="text-align:center;">Pay: $45/hr</h2><h2 style="text-align:center;">Per Diem: $140/day (for qualified travelers)</h2><h2 style="text-align:center;">Schedule: Full‑time, long‑term opportunity</h2><h2 style="text-align:center;">NEED SHIPFITTING EXPERIENCE </h2>We are seeking experienced Shipfitters for a major shipbuilding and repair project in the Charleston, SC area. This is a high‑level skilled trade position requiring strong structural fitting experience within shipyard environments.Position OverviewThe Shipfitter will be responsible for fabricating, assembling, and installing structural components on naval and commercial vessels. This role requires precision, the ability to read and interpret blueprints, and experience working in fast‑paced shipyard environments.Responsibilities<ul><li>Layout, fit, and fabricate metal structures according to blueprints and specifications</li><li>Install bulkheads, foundations, decks, frames, and other structural components</li><li>Perform cutting, grinding, burning, and tack welding as needed</li><li>Use measuring tools, levels, squares, and shipyard equipment</li><li>Work safely in confined spaces, at heights, and in various shipyard conditions</li><li>Collaborate with welders, pipefitters, and other trades to complete assigned tasks</li><li>Follow all safety protocols and shipyard procedures</li></ul>Requirements<ul><li>Minimum 5 years of shipfitting experience (required) ON A SHIPYARD PREVIOUSLY</li><li>Strong blueprint reading and layout skills</li><li>Proficiency with hand tools, torches, grinders, and shipyard equipment</li><li>Ability to work in confined spaces and at heights</li><li>Reliable transportation and ability to work full shifts</li><li>Must be able to lift, bend, climb, and perform physical tasks</li></ul>Compensation &amp; Benefits<ul><li>$45 per hour, based on experience</li><li>$140/day per diem for eligible travelers</li><li>Long‑term, stable project</li><li>Overtime opportunities may be available</li></ul>Job Type &amp; LocationThis is a Contract position based out of Charleston, SC.Pay and BenefitsThe pay range for this position is $38.00 - $55.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Charleston,SC.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>1st Shift MIG/TIG Welder - Immediate Openings | $24-$28/hr</h1><h3>Interviewing This Week - Start Quickly!</h3>Are you an experienced MIG or TIG Welder looking for a stable first-shift opportunity with competitive pay, a clean work environment, and a company that values its employees? We are hiring 1st Shift Welders immediately and looking for skilled professionals to join our growing team.<h3>Schedule</h3>✅ Monday-Thursday: 5:30 AM - 4:00 PM✅ 3-Day Weekends Most Weeks✅ Optional Overtime Available on Fridays<h3></h3><h3>Pay &amp; Benefits</h3>💲 $24-$28/hour (based on experience)🏭 Clean, climate-controlled facility👷 $125 annual boot allowance✅ Comprehensive benefits package🤝 Team-oriented culture with strong employee retention📈 Stable company with long-term career opportunities<h3></h3><h3>What You'll Do</h3><ul><li>Perform MIG and TIG welding on stainless steel and aluminum components</li><li>Weld to AWS 3G/4G standards</li><li>Read and interpret blueprints, installation drawings, and work instructions</li><li>Fabricate parts and components from raw materials as needed</li><li>Inspect completed work to ensure quality standards are met</li><li>Operate hand, power, cordless, and pneumatic tools</li><li>Maintain a safe, organized, and efficient work area</li></ul><h3>What We're Looking For</h3><ul><li>Previous MIG and/or TIG welding experience</li><li>Ability to read and interpret blueprints and technical drawings</li><li>Experience working with stainless steel and aluminum preferred</li><li>Strong attention to detail and commitment to quality craftsmanship</li><li>Ability to work independently and as part of a team</li></ul><h3>Apply Today</h3><ul><li>We're actively scheduling interviews and making hiring decisions quickly. If you're a skilled welder looking for a great first-shift opportunity with excellent pay and benefits, apply now.</li></ul>Job Type &amp; LocationThis is a Permanent position based out of Ephrata, PA.Pay and BenefitsThe pay range for this position is $49920.00 - $58240.00/yr.401k: 100% match of first 3%, and 50% match for the next 2%
- 4 Tiers: Employee only, Employee and Spouse, Employee and Children, Family. 3 plan options: PPO, HDHP Gold, HDHP Silver
- Dental and Vision Plans
- Basic life insurance coverage of $30,000
- PTO: 60 hours in first 2 years, then 100 hours year 2-5, 140 hours year 5-10, 180 hours at 10 years and afterWorkplace TypeThis is a fully onsite position in Ephrata,PA.Application DeadlineThis position is anticipated to close on Aug 3, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>MIG Welder – 1st, 2nd &amp; Weekend Shifts</h1><h3>$23–$30/Hour | Career Growth Opportunities</h3><h2>Join a Growing Fabrication &amp; Manufacturing Team</h2>Are you an experienced MIG Welder looking for a long-term opportunity with a company that values quality craftsmanship and professional growth? We are seeking skilled welders to join our expanding team on 1st, 2nd, and Weekend shifts. This role offers the opportunity to work in a modern manufacturing environment where your welding and fabrication skills will play a critical role in producing high-quality products.If you are passionate about welding, can read blueprints confidently, and thrive in a hands-on production setting, we'd love to hear from you.<hr><h2>Key Responsibilities</h2><ul><li>Perform MIG welding according to engineering drawings, blueprints, and production specifications.</li><li>Read and interpret welding symbols, weld callouts, and fabrication requirements.</li><li>Determine proper weld positions, techniques, and settings to complete projects accurately and efficiently.</li><li>Weld mild steel and stainless steel materials ranging from 7-gauge to 1/4-inch thickness.</li><li>Inspect finished welds to ensure compliance with quality standards and customer specifications.</li><li>Read and interpret detailed fabrication and welding blueprints.</li><li>Assist with cutting, staging, organizing, and preparing materials for fabrication and production.</li><li>Support additional fabrication processes including grinding, machine operation, insulation cutting, and finishing work.</li><li>Maintain a clean, organized, and safe work area.</li><li>Collaborate with team members and provide support across fabrication departments as needed.</li></ul><hr><h2>Required Qualifications</h2><ul><li>Minimum of 1 year of MIG welding experience.</li><li>Strong ability to read and interpret blueprints and engineering drawings.</li><li>Knowledge of welding symbols and fabrication specifications.</li><li>Working knowledge of shop math.</li><li>Previous experience in a fabrication or manufacturing environment.</li><li>Ability to produce high-quality welds on both mild steel and stainless steel.</li><li>Strong attention to detail and commitment to workmanship standards.</li><li>Ability to work independently while also contributing to a team-oriented environment.</li></ul><hr><h2>Why Join Us?</h2><ul><li>Competitive pay ranging from $23–$30 per hour, based on experience and skill level.</li><li>Available 1st, 2nd, and Weekend shifts to fit your schedule.</li><li>Opportunity to work in a modern, well-equipped fabrication facility.</li><li>Stable, long-term employment with a company experiencing significant growth.</li><li>Diverse responsibilities that allow you to expand your welding and fabrication skills.</li><li>Collaborative team environment that values safety, quality, and continuous improvement.</li><li>Career advancement opportunities as the organization continues to expand.</li></ul><hr><h2>Work Environment</h2><ul><li>Modern manufacturing and fabrication facility.</li><li>Primarily welding-focused role with opportunities to support fabrication projects.</li><li>Fast-paced, hands-on production environment.</li><li>Team-oriented culture with strong support from leadership and coworkers.</li><li>Growth-focused company investing in its people, equipment, and future success.</li></ul><hr><h3>Apply Today</h3><ul><li>If you're an experienced MIG Welder who takes pride in producing quality work and wants to be part of a growing organization, we encourage you to apply. Join a team where your skills are valued, your contributions make an impact, and your career can continue to grow.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Apple Valley, MN.Pay and BenefitsThe pay range for this position is $23.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Apple Valley,MN.Application DeadlineThis position is anticipated to close on Aug 5, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: WelderJob DescriptionThis role focuses on performing high-quality MIG welding in a fast-paced manufacturing environment. You will interpret blueprints and welding symbols, set up welding equipment, and produce structural and production weldments that meet strict quality and safety standards. The position offers the opportunity to work on a variety of steel and equipment assemblies while contributing to an organized and growing operation.Responsibilities<ul><li>Perform MIG welding on steel components, structural parts, and equipment assemblies according to production requirements.</li><li>Set up and assemble weldments based on blueprints, welding symbols, and engineering drawings.</li><li>Configure welding machines and adjust welding parameters to achieve proper penetration, bead appearance, and weld integrity.</li><li>Conduct in-process inspections to verify weld quality and ensure parts meet specified tolerances.</li><li>Measure and inspect finished parts to maintain dimensional accuracy and adherence to quality standards.</li><li>Maintain production efficiency by meeting output targets while upholding quality and safety expectations.</li><li>Follow established safety procedures and maintain a safe, clean, and organized work area.</li><li>Identify and communicate equipment malfunctions, quality concerns, or production issues to supervision in a timely manner.</li><li>Collaborate with other departments, such as fabrication, assembly, and quality control, to ensure smooth workflow and on-time delivery.</li><li>Support continuous improvement by following standard work practices and suggesting process or quality improvements when appropriate.</li></ul>Essential Skills<ul><li>Minimum 1 year of MIG welding experience in a manufacturing environment.</li><li>Proficiency in reading and interpreting blueprints, welding symbols, and engineering drawings.</li><li>Hands-on experience setting up welding machines and adjusting welding parameters for different applications.</li><li>Strong quality inspection skills, including the ability to measure parts and maintain tight tolerances.</li><li>High school diploma or equivalent.</li><li>Experience performing production welding and assembly welding in a shop or manufacturing setting.</li><li>Ability to perform structural welding on steel components and fabricated structures.</li><li>Comfort working in a fast-paced production environment while maintaining consistent weld quality.</li><li>Basic understanding of steel fabrication processes and shop welding practices.</li><li>Ability to follow safety procedures and use appropriate personal protective equipment.</li></ul>Additional Skills &amp; Qualifications<ul><li>AWS D1.1 certification preferred, or the ability to obtain company welding certifications.</li><li>Aluminum welding experience is a plus.</li><li>Stainless steel welding experience is a plus.</li><li>Experience with TIG and flux core welding is beneficial.</li><li>Experience as a MIG welder, production welder, manufacturing welder, fabricator/welder, structural welder, or shop welder.</li><li>Strong blueprint reading skills and familiarity with welding symbols and weld inspection standards.</li><li>Experience working in steel fabrication environments with a focus on structural and production work.</li></ul>Why Work Here?Employees benefit from a four-day work week that supports work-life balance, with schedules that adjust to accommodate hot weather conditions. The organization is expanding rapidly and maintains a strong, stable workload driven by large, long-term accounts. Team members enjoy full benefits upon conversion to direct employment and work in a culture characterized by low turnover and long employee tenure, reflecting a supportive and engaging workplace.Work EnvironmentThe role is based in a large, well-organized shop environment that includes a warehouse, machine operating room (with press brake, laser, and related equipment), dedicated welding area, dump truck and loader department, patcher department, CalTrans-focused department, final assembly area, and quality control department. The facility is clean and structured for the size and volume of the operation, with a Fastenal supplier on site to support tooling and supplies. The shop can be hot during the summer and cold during the winter, and the pace of work is consistent with a busy production environment. Appropriate workwear and personal protective equipment are required to ensure safety and comfort in the welding and fabrication areas.Job Type &amp; LocationThis is a Contract position based out of Fresno, CA.Pay and BenefitsThe pay range for this position is $22.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Fresno,CA.Application DeadlineThis position is anticipated to close on Jul 31, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Structural WelderPay: $24–$32 per hour (based on experience)Shift: 6:00 AM – 4:30 PM, Monday–Friday (occasional Saturdays)Location: Cocoa, FL 32926For a quicker response please txt Nick @ 407- 754-2026<h3>Job Overview</h3>We are seeking a skilled Structural Steel Welder to join our fabrication team in Cocoa, FL. In this role, you will produce high‑quality, code‑compliant structural steel components for large‑scale construction projects. This position is ideal for welders who take pride in craftsmanship, safety, and precision.<hr><h3>Key Responsibilities</h3><ul><li>Review fabrication drawings, work orders, weld symbols, and welding procedures before starting work</li><li>Set up welding equipment and verify materials, joint fit‑up, and alignment</li><li>Perform structural welds on carbon steel using Flux‑Cored (FCAW) processes</li><li>Weld in multiple positions (flat, horizontal, vertical, overhead)</li><li>Control weld penetration, bead profile, and heat input to prevent distortion</li><li>Clean welds, remove slag, and perform basic grinding or touch‑ups as needed</li><li>Conduct self‑inspections to ensure weld quality and code compliance</li><li>Work closely with fitters, supervisors, and quality personnel to resolve issues</li><li>Follow all safety procedures, PPE requirements, and hot‑work practices</li><li>Prepare completed assemblies for inspection, coating, or shipment</li></ul><hr><h3>Required Skills &amp; Qualifications</h3><ul><li>1+ year of recent welding experience (structural steel preferred)</li><li>Hands‑on experience welding carbon steel components</li><li>Ability to produce consistent, repeatable, code‑compliant welds</li><li>Strong understanding of joint types, weld sizes, and structural connections</li><li>Ability to read and interpret fabrication drawings and weld symbols</li><li>Understanding of how weld quality impacts structural integrity</li><li>Comfortable following written work instructions and welding procedures</li></ul><hr><h3>Why Work With Us?</h3><ul><li>Steady, long‑term work in a professional fabrication environment</li><li>Exposure to large‑scale, high‑profile construction projects</li><li>Modern equipment and well‑organized shop</li><li>Team‑driven culture focused on quality, safety, and accountability</li><li>Opportunities to grow and advance within structural steel fabrication</li><li>Pride in building durable, high‑impact structures</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Cocoa, FL.Pay and BenefitsThe pay range for this position is $24.00 - $32.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Cocoa,FL.Application DeadlineThis position is anticipated to close on Aug 7, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: MIG/TIG WelderShift: 6AM-2:30PM (opportunity for overtime).Pay: $24-29/hour for shop welders and $28-33/hour for local traveling welders.Job DescriptionThis role focuses on performing high-quality MIG and TIG welding in a metal fabrication environment. You will work with various metals, including stainless steel, to produce accurate and durable components by reading and interpreting blueprints and drawings, using hand and power tools, and contributing to a wide range of fabrication and metal manufacturing projects.Have openings for shop welders as well as traveling welders (Greater Springfield area). Responsibilities<ul><li>Perform MIG and TIG welding on a variety of metals, including stainless steel, to produce high-quality welds that meet specifications.</li><li>Read and interpret blueprints, drawings, and technical documents to understand project requirements and weld symbols.</li><li>Use hand tools, power tools, and measuring tools such as tape measures consistently and accurately to prepare and assemble materials.</li><li>Set up, operate, and maintain welding equipment and related tools in accordance with safety and operational guidelines.</li><li>Assist with metal fabrication tasks, including cutting, fitting, and assembling components prior to welding.</li><li>Inspect completed welds and fabricated parts for accuracy, quality, and adherence to specifications, making adjustments as needed.</li><li>Follow safety procedures and best practices while working in a metal shop and fabrication environment.</li><li>Collaborate with team members to complete production and fabrication projects efficiently and on schedule.</li></ul>Essential Skills<ul><li>Proficiency in MIG welding.</li><li>Proficiency in TIG welding.</li><li>Ability to weld stainless steel and other metals accurately and consistently.</li><li>Ability to read and interpret blueprints and drawings.</li><li>Experience in fabrication and metal manufacturing.</li><li>Skilled in using hand tools and power tools safely and effectively.</li><li>Ability to use a tape measure accurately and consistently.</li><li>Strong attention to detail and commitment to producing high-quality work.</li><li>Ability to follow safety procedures in a metal shop environment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Any education or certification related to welding is a bonus.</li><li>OSHA 10 certification is a bonus.</li><li>Previous experience working in a metal shop or fabrication setting is beneficial.</li><li>Strong mechanical aptitude and problem-solving skills.</li><li>Ability to work independently and as part of a team.</li></ul>Why Work Here?Employees receive weekly pay, paid time off, and access to medical, dental, and vision insurance, along with a 401(k) plan. You become a permanent, direct-placement employee from day one and benefit from a 90-day pay review as well as annual pay reviews, providing clear opportunities for recognition and growth.Work EnvironmentThe role is based in a metal shop and fabrication environment with primary hours on first shift from 6:00 a.m. to 2:30 p.m. You will work around welding equipment, hand tools, power tools, and metal fabrication machinery, following standard safety practices in a shop setting.Job Type &amp; LocationThis is a Permanent position based out of Springfield, MO.Pay and BenefitsThe pay range for this position is $50000.00 - $73000.00/yr.Company offers full medical, dental, and vision insurance. 401k is offered. PTO included. Pay is weekly. 90 day pay review and annual pay reviews.Workplace TypeThis is a fully onsite position in Springfield,MO.Application DeadlineThis position is anticipated to close on Jul 27, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Mig WelderPay: Depends on experience and weld test4x10 scheduleJob DescriptionWe are seeking skilled welders to join our team for a large-scale project involving structural steel. This position requires proficiency in MIG welding and involves working with structural steel of up to 2 inches thick.Responsibilities<ul><li>Perform MIG welding on structural steel components.</li><li>Interpret and work from blueprints to ensure accurate welding.</li><li>Collaborate effectively within a team of up to three people.</li><li>Maintain a strong work ethic and a positive attitude.</li><li>Contribute to maintaining the cleanliness and safety of the work environment.</li></ul>Essential Skills<ul><li>Proficiency in MIG welding.</li><li>Experience with structural steel, ideally with thicknesses up to 2 inches.</li><li>Ability to read and interpret blueprints.</li><li>Strong teamwork capabilities.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Columbus, OH.Pay and BenefitsThe pay range for this position is $20.00 - $27.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Columbus,OH.Application DeadlineThis position is anticipated to close on Jul 27, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Title: Production WelderJob DescriptionJoin a high-volume manufacturing environment where you will use blueprints, fixtures, and a variety of welding processes to produce steel and galvanized metal products to precise specifications. You will set up and operate welding equipment safely and efficiently, deliver consistent, high-quality welds, and contribute to a collaborative production team focused on craftsmanship and performance.Responsibilities<ul><li>Set up and operate MIG, TIG, flux core, and stick welding equipment safely, productively, and in an ergonomically correct manner to manufacture quality parts and assemblies.</li><li>Hand weld products made of steel and galvanized metal using blueprints, fixtures, and appropriate welding processes while meeting all quality and productivity standards.</li><li>Adjust welding machines as needed to maintain part quality, minimize smoke and spatter, and ensure stable, consistent welds.</li><li>Produce high-quality welds with good workmanship and minimal rejects, consistently meeting acceptable productivity levels with limited supervision.</li><li>Read and understand blueprints, weld symbols, part numbers, tolerances, and data critical to quality and weld placement, and apply this information accurately to each job.</li><li>Manufacture products to specification with and without fixtures, using weld tables, tape measures, protractors, clamps, and other fabrication tools.</li><li>Identify required components for each product and assemble and fit parts correctly prior to welding.</li><li>Use tape measures in fractions and decimals and apply basic math to determine required dimensions and verify part accuracy.</li><li>Professionally communicate production issues, quality concerns, and clarification needs to front-line employees and leadership to support smooth operations.</li><li>Follow all safety requirements, including proper use of safety glasses, gloves, and other protective equipment as described in job hazard analyses.</li><li>Perform grinding, fitting, and basic fabrication tasks as needed to prepare and finish welded assemblies.</li><li>Complete work to print requirements independently, ensuring that all products meet specified standards before leaving the work area.</li><li>Perform other related duties as assigned to support production and maintain a clean, organized work area.</li></ul>Essential Skills<ul><li>Previous manufacturing experience preferred, with exposure to production or fabrication environments.</li><li>Hands-on MIG welding experience, including setup, operation, and adjustment of MIG welding equipment.</li><li>Proficient welding skills with galvanized steel, carbon steel, and stainless steel, including understanding of material behavior and weld quality requirements.</li><li>Ability to read and interpret blueprints, including weld symbols, part numbers, tolerances, and critical quality data.</li><li>Ability to use a tape measure accurately in both fractions and decimals to verify dimensions and layouts.</li><li>Capability to apply basic math to determine dimensions, fit-up requirements, and part verification.</li><li>Ability to work independently and complete work to print requirements with minimal supervision.</li><li>Strong attention to detail and commitment to producing consistent, high-quality welds with very few rejects.</li><li>Effective communication skills to professionally discuss production issues and seek clarification when needed.</li><li>Commitment to following safety procedures, including proper use of personal protective equipment such as safety glasses and gloves.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with MIG welding, TIG welding, flux core welding, and stick welding in a production setting.</li><li>Experience in fabrication, fitting, and assembly of structural steel, sheet metal, and mild steel components.</li><li>Skill in blueprint reading and interpretation for production, fabrication, and weld placement.</li><li>Experience working with stainless steel, structural steel, and sheet metal in manufacturing environments.</li><li>Proficiency with grinding and finishing tools to prepare and refine welded parts.</li><li>Familiarity with weld tables, fixtures, clamps, and other fabrication equipment to build products to specification.</li><li>Ability to operate welder MIG equipment and adjust parameters to achieve desired weld characteristics.</li><li>Experience in production welding environments with a focus on efficiency, quality, and meeting output targets.</li></ul>Why Work Here?You will join a company that invests in its people through comprehensive benefits, performance-based rewards, and long-term financial support. Enjoy weekly pay and a robust health package with multiple medical plans, including PPO and HSA options, plus dental and vision coverage that are significantly company-paid, even for family plans. Take advantage of a matching Cart Cash program to help offset premiums for voluntary benefits such as dental, vision, and short-term disability. Build your future with a 401(k) plan that offers dollar-for-dollar matching up to 5%, complemented by a yearly profit-sharing program. Benefit from quarterly performance bonuses tied to your contributions and attendance, as well as incentive days that reward strong attendance. Earn vacation time quickly, starting with three days after seven months of full-time employment, additional prorated vacation at your one-year anniversary, and eligibility for two weeks of vacation starting the following January. Support your wellness goals with access to a corporate discount at a local fitness center, making it easier to maintain a healthy lifestyle while growing your career.Work EnvironmentWork in a busy, non-climate-controlled production facility that can be loud and requires awareness of safety practices at all times. You will operate welding equipment and fabrication tools, including MIG, TIG, flux core, and stick welders, weld tables, clamps, grinders, and measuring tools such as tape measures and protractors. The environment includes welding galvanized steel, which can produce noticeable fumes and sparks, as well as mild steel, carbon steel, and stainless steel, each with distinct welding characteristics. You will follow established safety guidelines, including wearing safety glasses, gloves, and other appropriate protective gear, while working on various shifts that may offer shift differentials for second and third shifts.Job Type &amp; LocationThis is a Contract to Hire position based out of Saint Charles, MO.Pay and BenefitsThe pay range for this position is $24.00 - $26.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Saint Charles,MO.Application DeadlineThis position is anticipated to close on Jul 28, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>Hiring for Entry Level Welder!</h2>Job DescriptionThis position fabricates, assembles, and welds metal components used in the production of seating systems and related products. This role requires accurately reading blueprints, performing MIG welding, and operating welding equipment safely while consistently meeting quality standards and production goals in a fast-paced manufacturing environment.Responsibilities<ul><li>Fabricate and assemble metal components for seating systems and related products according to blueprints and specifications.</li><li>Perform MIG welding on a variety of metal parts, ensuring strong, clean, and consistent welds.</li><li>Interpret and follow technical drawings and blueprints to complete work accurately and efficiently.</li><li>Set up, operate, and maintain welding equipment and related tools in a safe and effective manner.</li><li>Fit and position components prior to welding to ensure proper alignment and structural integrity.</li><li>Grind and finish welds and surfaces as needed to meet quality and appearance standards.</li><li>Inspect completed welds and assemblies for defects and adherence to quality standards, making adjustments as needed.</li></ul>Essential Skills<ul><li>At least 1 year of welding experience, preferably in a manufacturing environment.</li><li>Proficiency in MIG welding with a basic understanding of welding fundamentals.</li><li>Ability to read and interpret blueprints and technical drawings.</li><li>Experience working in a manufacturing environment with production goals.</li><li>Skilled in using hand and power tools related to welding and fabrication.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with fabrication, fitting, and grinding of metal components.</li><li>Reliable attendance history and ability to follow established procedures.</li><li>Ability to collaborate effectively with coworkers in a team-oriented environment.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Altamont, IL.Pay and BenefitsThe pay range for this position is $22.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Altamont,IL.Application DeadlineThis position is anticipated to close on Jul 29, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h2>Aluminum Welder</h2>Pay: $28–$38/hrLocation: Portland, OR<h3>Job Overview</h3>We are seeking an experienced Aluminum Welder to join a growing fabrication team in Portland. This role is responsible for reading blueprints, fabricating components, and performing high-quality aluminum MIG welding to produce custom products that meet strict quality and design standards. The ideal candidate has a strong fabrication experience, takes pride in craftsmanship, and works safely in a fast-paced shop environment.<h3>Responsibilities</h3><ul><li>Interpret blueprints, shop drawings, and fabrication plans to determine project specifications.</li><li>Perform aluminum MIG welding, cutting, bending, fitting, and assembly of metal and plastic components.</li><li>Operate fabrication equipment including saws, brake presses, routers, grinders, and welding machines.</li><li>Ensure all fabricated parts meet dimensional tolerances, fit-up requirements, and quality standards.</li><li>Conduct inspections throughout the fabrication process and make adjustments as needed.</li><li>Maintain a clean, organized, and safe work environment.</li><li>Collaborate with team members to meet production schedules and project deadlines.</li><li>Identify and communicate material defects, quality concerns, or equipment issues.</li></ul><h3>Qualifications</h3><ul><li>Minimum of 2 years of fabrication, welding, or sign manufacturing experience.</li><li>Strong aluminum MIG welding skills with the ability to produce high-quality welds.</li><li>Ability to read and interpret blueprints, engineering drawings, and shop documentation.</li><li>Experience using fabrication equipment such as saws, routers, brake presses, and hand tools.</li><li>Strong attention to detail and commitment to producing quality work.</li><li>Ability to work independently and as part of a team.</li><li>Solid understanding of shop safety practices and procedures.</li></ul><h3>Preferred Qualifications</h3><ul><li>Experience with additional welding processes such as TIG or steel MIG welding.</li><li>Knowledge of plastic fabrication and assembly techniques.</li><li>Strong troubleshooting and problem-solving abilities.</li><li>Ability to accurately follow written work instructions and production documentation.</li></ul><h3>Benefits</h3>This company offers an excellent benefits package designed to support employees both professionally and personally. Benefits include medical, dental, and vision coverage, a competitive 401(k) program with employer matching, paid time off that increases with tenure, and additional employee perks. The organization values long-term career growth, stability, and employee well-being.<h3>Work Environment</h3>This position is based in a fabrication shop where employees build custom products using welding and fabrication equipment. The environment is hands-on and team-oriented, with a strong emphasis on safety, quality, and craftsmanship. Candidates should be comfortable working with a variety of tools and equipment while maintaining a clean and organized workspace.Job Type &amp; LocationThis is a Permanent position based out of Portland, OR.Pay and BenefitsThe pay range for this position is $58240.00 - $79040.00/yr.Our benefits include health, dental and vision. We pay 50%. We do a 3% match on a 401k. We have a PTO schedule that grows the longer you have been here and we do a Costco card. 
The 401k can go up to 5% match but after 3% we match 50% of the contribution up to 5%.Workplace TypeThis is a fully onsite position in Portland,OR.Application DeadlineThis position is anticipated to close on Aug 3, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

<h1>Welder - Up to $33/Hour | 1st &amp; 2nd Shift Available | Career Growth Opportunities</h1><h3>Earn Up to $33/Hour + Annual Bonus Potential</h3>Are you an experienced Structural Welder looking for a long-term opportunity with room to grow? Join a team that builds critical steel bridge structures and offers advancement opportunities into Lead Welder positions.We are currently hiring for both 1st Shift and 2nd Shift Welders. If you have experience with Flux Core MIG Welding, Structural Steel Welding, Blueprint Reading, and Fabrication, we want to hear from you.<h2>Pay &amp; Schedule</h2>💰 Pay: Up to $33/hour✅ Annual Bonus Potential✅ Overtime Opportunities Available1st Shift:<ul><li>Monday-Thursday</li><li>5:30 AM - 4:00 PM</li></ul>2nd Shift:<ul><li>Monday-Thursday</li><li>4:00 PM - 2:30 AM</li></ul>Enjoy a 4-day work week with 3-day weekends every week.<hr><h2>What You'll Do</h2><ul><li>Perform Flux Core MIG welding on structural steel bridge components up to 1/2" thick</li><li>Fabricate and weld steel bridge assemblies from blueprints and specifications</li><li>Complete layout and fitting work using detailed drawings</li><li>Operate overhead cranes and Jib cranes safely</li><li>Use fabrication equipment including:<ul><li>Band saws</li><li>Drill presses</li><li>Stud welders</li><li>Grinders</li></ul></li><li>Weld in multiple positions as required</li><li>Move throughout the fabrication shop to complete projects</li><li>Contribute to high-quality bridge construction projects</li></ul><hr><h2>Required Skills</h2><ul><li>Structural welding experience</li><li>Flux Core MIG welding experience</li><li>Ability to read and interpret blueprints</li><li>Strong fabrication and layout skills</li><li>Ability to work independently with minimal supervision</li><li>Dependable attendance and strong work ethic</li><li>Ability to lift up to 50 lbs regularly</li><li>Ability to kneel, crawl, bend, and work in various welding positions</li></ul><hr><h2>Qualifications</h2><ul><li>Proven experience welding structural steel</li><li>Experience passing welding certifications or weld tests</li><li>Ability to pass:<ul><li>3F Weld Test</li><li>4F Weld Test</li><li>3G Weld Test within the first month</li></ul></li><li>Desire to learn and grow within the organization</li></ul><hr><h2>Why Join Our Team?</h2>✅ Earn up to $33/hour✅ Annual bonus opportunity✅ Both 1st and 2nd shift openings✅ 4-day work week✅ Advancement opportunities into Lead Welder roles✅ Stable, long-term manufacturing environment✅ Work on large-scale bridge fabrication projectsJob Type &amp; LocationThis is a Contract to Hire position based out of Chaska, MN.Pay and BenefitsThe pay range for this position is $28.00 - $33.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Chaska,MN.Application DeadlineThis position is anticipated to close on Aug 4, 2026. 
 
 <h4>About Aerotek</h4>

Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

San Francisco Fair Chance Ordinance:
 Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records.

Massachusetts Lie Detector:
 It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Use of Artificial Intelligence (AI):
 We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Learn more about free job search tools, learning opportunities, and exclusive member events.

Discover CareerCircle

Access resources to advance your job search and career growth.

Tools & Training

Explore a wide range of job opportunities that match your skills and career goals.

Search Jobs

Create a professional resume that captures the attention of top employers with our easy-to-use tool.

Resume Builder

Prepare for your next interview with our expert tips and strategies.

Interview Prep

Discover in-depth profiles of leading employers to find your ideal workplace.

Search Companies

Develop in-demand skills with curated courses for today’s job market.

Courses

Access career resources and job postings anytime, anywhere with our app.

Mobile App

Source skilled talent and build your team.

Talent Acquisition

Access skilled talent ready to excel via our AI-driven platform, virtual events, and recruitment services.

CareerCircle TalentConnect

Transform your workforce and hiring practices with essential training and continuing education.

InclusiveU

Broaden your talent pool with dedicated support for individuals with disabilities.

Getting Hired Powered by CareerCircle

Mission aligned solutions supporting Non-Profit Organizations, Educational Institutions, Local Workforce Development Boards, and Learning Providers.

Upskilling & Job Advocacy

Upskilling solutions designed to empower members with in-demand skills training and ongoing support for successful certificate completion.

CareerReady

Job advocacy solutions to connect job seekers to inclusive employers through dedicated recruiting support.

CareerAdvocacy

Learn how we connect all communities with careers and build skilled talent pipelines.

About CareerCircle

Discover answers to common questions and gain insights into our goals and services.

Reach out to us for inquiries, support, or to learn more about our mission and services.

Contact

Explore our blog for latest news and trends for job seekers and employers.

Blog

Access our virtual career fairs, job seeker workshops, and employer focused webinars.

Events

Discover valuable resources to enhance your hiring strategy and drive organizational success.

Employer Resources

Get the latest news and updates on our mission, partnerships, and community impact.

Press Room

Learn how CareerCircle can help veterans find meaningful employment

Veterans

Learn how CareerCircle can help individuals with disabilities find meaningful employment

Individuals with Disabilities

Learn how CareerCircle can help military spouses find meaningful employment

Military Spouses

Discover benefits and best practices for hiring veterans

Disability Hiring

Discover benefits and best practices for hiring individuals with disabilities 

Aerotek Jobs

Browse Aerotek Jobs

JOB SEEKERS

EMPLOYERS

COMMUNITY PARTNERS

ABOUT

RESOURCES