Job Title: Janitorial WorkerJob DescriptionThe Janitorial Worker will be responsible for maintaining cleanliness in office spaces, common areas, and other building areas. This role includes preparing apartment and condo buildings for new tenants by ensuring all spaces are cleaned and ready for occupancy. The worker will also be tasked with the removal of trash and debris.Responsibilities<ul><li>Perform general cleaning of office spaces and common areas.</li><li>Prepare apartment and condo buildings for new tenants by cleaning and ensuring readiness.</li><li>Remove trash and debris from designated areas.</li><li>Maintain cleanliness and orderliness in all assigned buildings.</li></ul>Essential Skills<ul><li>Experience in cleaning and janitorial work.</li><li>Knowledge of building maintenance procedures.</li><li>Attention to detail in cleaning tasks.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in building maintenance is advantageous.</li><li>Prior experience in janitorial roles is preferred.</li></ul>Work EnvironmentThe role involves working in office spaces, cleared-out apartment buildings, and other building areas. The environment requires physical activity, including lifting and moving debris.Why Work Here?Join a team that values cleanliness and efficiency, contributing to a well-maintained and welcoming environment. Enjoy a supportive work culture focused on quality and attention to detail.Job Type &amp; LocationThis is a Contract to Hire position based out of Mankato, MN.Pay and BenefitsThe pay range for this position is $18.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Mankato,MN.Application DeadlineThis position is anticipated to close on Feb 24, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

public

Janitoral Worker

Job Title: Janitorial WorkerJob DescriptionWe are seeking a dedicated and meticulous housekeeper to ensure our facilities remain clean, sanitized, and well-maintained. The ideal candidate will perform a variety of cleaning tasks, maintain supply inventories, and uphold health and safety standards.Responsibilities<ul><li>Sweep, mop, and vacuum floors in offices, hallways, restrooms, and common areas.</li><li>Dust and wipe down furniture, light fixtures, and baseboards.</li><li>Clean and sanitize restrooms, including toilets, sinks, mirrors, stall partitions, and floors.</li><li>Empty trash receptacles and replace liners.</li><li>Clean and disinfect high-touch areas like door handles and light switches.</li><li>Strip, wax, and buff floors as needed.</li><li>Spot clean or perform regular deep cleaning of carpets.</li><li>Restock cleaning supplies, toilet paper, soap, paper towels, and other bathroom and office products.</li><li>Maintain inventory of cleaning supplies and report low stock to management.</li><li>Report maintenance or repair issues, such as leaks, broken fixtures, or damaged furniture, to appropriate personnel.</li><li>Follow safety procedures for handling chemicals and cleaning equipment.</li><li>Ensure all cleaning equipment is properly maintained and cleaned after use.</li><li>Adhere to all health, safety, and cleanliness standards and regulations.</li><li>Perform deep cleaning tasks as needed, such as deep carpet cleaning and window washing.</li><li>Clean and disinfect kitchens, break rooms, and any other specialized areas.</li><li>Assist with event setups and clean-up when necessary.</li><li>Respond to urgent cleaning requests in a timely manner.</li></ul>Essential Skills<ul><li>Experience in housekeeping, cleaning, or janitorial work.</li><li>Proficiency in mopping, sweeping, sanitizing, and general labor tasks.</li><li>Ability to handle custodial equipment and supplies.</li></ul>Additional Skills &amp; Qualifications<ul><li>Attention to detail and a commitment to maintaining cleanliness standards.</li><li>Ability to work independently and manage time efficiently.</li><li>Strong communication skills for reporting maintenance issues.</li></ul>Why Work Here?Join a team that values your attention to detail and dedication to cleanliness. Enjoy a supportive work environment where your contributions are recognized and appreciated.Work EnvironmentWork in a clean and organized facility where safety is prioritized. The position requires physical activity, including lifting and moving equipment. Dress code is casual but professional, ensuring a comfortable and efficient work experience.Job Type &amp; LocationThis is a Contract position based out of Wilson, NC.Pay and BenefitsThe pay range for this position is $15.00 - $18.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Wilson,NC.Application DeadlineThis position is anticipated to close on Mar 2, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Janitorial Worker - 2nd ShiftJob DescriptionWe are seeking a diligent and reliable janitorial worker to maintain cleanliness in a large data center. You will be responsible for sweeping, dusting, mopping, and trash removal in office spaces, common areas, and the data center itself. Additionally, you will be tasked with cleaning restrooms and occasionally working outside to perform trash removal.Responsibilities<ul><li>Sweep, dust, and mop floors in office spaces, common areas, and the data center.</li><li>Remove trash from all designated areas.</li><li>Clean and sanitize restrooms regularly.</li><li>Work outside occasionally to perform trash removal tasks.</li></ul>Essential Skills<ul><li>At least 6 months of experience in janitorial, housekeeping, general production, warehouse, food service, or manufacturing.</li><li>Proficiency in floor care.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in floor care is a plus.</li></ul>Why Work Here?Join a reputable and well-known third-party facilities maintenance and janitorial company that values its employees by offering comprehensive health, dental, and vision benefits. Experience the opportunity to work in a supportive and professional environment. Starting pay rate of $16.50/hr.Work EnvironmentThis position is for the 2nd shift, from 2 pm to 10:30 pm, with occasional overtime as needed. You will work in a large, brand-new data center located in Mount Pleasant, which is still under construction. Please note that steel toe or composite toe boots are required.Job Type &amp; LocationThis is a Contract to Hire position based out of Mount Pleasant, WI.Pay and BenefitsThe pay range for this position is $16.50 - $16.50/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Mount Pleasant,WI.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Janitoral Worker - 2nd Shift

Job Title: Janitorial Worker - 3rd ShiftJob DescriptionJoin our team as a Janitorial Worker in a large data center, where you will play a crucial role in maintaining cleanliness and hygiene across the facility.Responsibilities<ul><li>Perform sweeping, dusting, and mopping in office spaces, common areas, and the data center.</li><li>Execute trash removal tasks both inside and occasionally outside the facility.</li><li>Ensure restrooms are thoroughly cleaned and maintained.</li></ul>Essential Skills<ul><li>Must have at least 6 months of experience in janitorial, housekeeping, general production, warehouse, food service, or manufacturing.</li><li>Basic floor care knowledge.</li></ul>Additional Skills &amp; Qualifications<ul><li>Floor care experience is considered a plus.</li></ul>Why Work Here?This position offers the opportunity to work for a large, reputable third-party facilities maintenance and janitorial company. Employees receive full health, dental, and vision benefits. Starting pay of $16.50/hr.Work EnvironmentThis is a 3rd shift position, from 10 pm to 6:30 am, with potential for overtime as needed. The role is based in a large, brand-new data center in Mount Pleasant that is still under construction. Steel toe or composite toe boots are required.Job Type &amp; LocationThis is a Contract to Hire position based out of Mount Pleasant, WI.Pay and BenefitsThe pay range for this position is $16.50 - $16.50/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Mount Pleasant,WI.Application DeadlineThis position is anticipated to close on Feb 23, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Janitoral Worker - 3rd Shift

Job Title: Janitorial Worker 1st Shift (Housekeeper)Job DescriptionWe are seeking a dedicated and professional Janitorial Worker for the 1st shift to join our team at a prestigious Catholic, private, coeducational, four-year institution. The role involves maintaining cleanliness and standards across various buildings on a beautiful 550-acre suburban campus, located in Center Valley, Pennsylvania.Responsibilities<ul><li>Maintain cleanliness across assigned areas to meet defined standards.</li><li>Perform general janitorial duties including cleaning, sweeping, mopping, and trash removal.</li><li>Efficiently manage various building schedules and challenges.</li><li>Collaborate effectively within a team-driven environment.</li><li>Represent the institution with professionalism and competency.</li></ul>Essential Skills<ul><li>High School Diploma or GED</li><li>Ability to work overtime upon supervisor's request</li><li>Valid driver's license with a clean driving record</li></ul>Additional Skills &amp; Qualifications<ul><li>Two years' experience preferred, but not necessary.</li><li>Sensitivity to issues of ethnicity, disability, and diversity.</li><li>Dedication to the mission of a small, Catholic, liberal arts institution.</li></ul>Why Work Here?Join a community that values great benefits, including an excellent retirement plan with an 8% 401k match and 18 holidays. Enjoy the perk of free tuition for you and your dependents after one year of service. Be part of an inclusive environment that supports professional growth and a commitment to educational excellence.Work EnvironmentThe position is based on a vibrant campus with multiple student and staff-occupied buildings. The 1st shift runs from 7:00 AM to 3:30 PM, Monday through Friday, with a half-hour unpaid lunch. The dress code includes a red/maroon top (polo or shirt), dark pants, and sneakers. Uniforms will be provided after 1-2 weeks.Job Type &amp; LocationThis is a Contract to Hire position based out of Center Valley, PA.Pay and BenefitsThe pay range for this position is $16.00 - $17.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Center Valley,PA.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Janitoral Worker 1st Shist (Housekeeper)

Job Title: Janitorial TechnicianJob DescriptionJoin our team as a Janitorial Technician, where you will play a crucial role in maintaining cleanliness and order across various facilities. We offer flexible shifts, either 2nd or 3rd, with competitive pay for your dedication and hard work. Our supportive team values reliability and a strong work ethic.Responsibilities<ul><li>Perform housekeeping and janitorial duties to maintain offices, restrooms, and public areas in a clean and orderly condition.</li><li>Remove trash from offices and other work areas.</li><li>Strip and wax floors, maintain carpeted floors, and care for tiled surfaces.</li><li>Complete other various duties as assigned by the supervisor.</li></ul>Essential Skills<ul><li>Proven ability to maintain a stable job history.</li><li>Flexibility to work different jobs and schedules.</li><li>High school education or GED equivalent.</li></ul>Additional Skills &amp; Qualifications<ul><li>Ability to lift 50lbs (20% or less of the day).</li><li>Comfortable working at heights.</li></ul>Why Work Here?We offer a dynamic work environment where your contributions are valued and your growth is supported. Enjoy flexible working hours, a team-oriented atmosphere, and opportunities to learn and develop new skills. Be part of a workplace that supports your career goals and recognizes your hard work.Work EnvironmentWork in diverse facilities, some of which may not be climate-controlled. Approximately 25% of the time will be spent outdoors or traveling between sites. We provide all necessary personal protective equipment (PPE) to ensure your safety. Be prepared for varying climates and heights associated with different job sites.Job Type &amp; LocationThis is a Contract to Hire position based out of Blair, NE.Pay and BenefitsThe pay range for this position is $15.00 - $20.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Blair,NE.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Janitorial Technician

<h1>Janitorial Worker</h1>Location: Saratoga, NYSchedule: Monday–Friday, 8:00 AM – 4:30 PM<h2>About the Role</h2>We’re looking for a reliable and detail‑oriented Janitorial Worker/Custodian to help keep our community clean, safe, and welcoming. In this role, you’ll maintain the overall appearance of shared indoor and outdoor spaces, ensuring residents and visitors enjoy a well‑kept environment every day. If you take pride in creating clean, comfortable spaces, we want to meet you.<hr><h2>What You’ll Do</h2><ul><li>Maintain cleanliness in common areas including lobbies, hallways, stairwells, elevators, laundry rooms, and restrooms.</li><li>Perform routine floor care such as sweeping, mopping, vacuuming, and dusting.</li><li>Empty and reline trash receptacles in designated areas.</li><li>Clean windows and glass doors to ensure streak‑free, inviting entrances.</li><li>Support exterior upkeep by maintaining sidewalks, entryways, and parking areas.</li></ul><hr><h2>What You Bring</h2><h3>Essential Skills</h3><ul><li>Prior experience in janitorial, cleaning, or sanitation work.</li><li>Strong knowledge of basic and advanced floor‑care techniques.</li><li>Ability to work efficiently and manage daily cleaning routines.</li><li>Familiarity with trash removal and sanitation best practices.</li></ul><h3>Preferred Qualifications</h3><ul><li>Experience in environmental services or industrial cleaning.</li><li>Experience with sanitizing procedures in high‑traffic environments.</li></ul><hr><h2>Why You’ll Love Working With Us</h2>We believe in supporting our employees and rewarding great work. Here’s what you can expect:<ul><li>Annual bonus potential up to $2,500 based on apartment‑turnover quotas.</li><li>Company vehicle provided during work hours.</li><li>Supplemental on‑call pay, overtime opportunities, and a gas allowance.</li><li>Company‑provided cell phone for work use.</li><li>Weekly uniform laundry service, plus provided boots and outerwear for comfort and safety.</li><li>401(k) with company match.</li><li>Birthday PTO—enjoy your special day off.</li><li>Access to HVCC training programs for certifications in electrical, HVAC, and other skilled trades.</li><li>A team culture built on integrity, respect, collaboration, accountability, and celebrating success.</li></ul><hr><h2>Work Environment</h2>You’ll be based at Apartments in Saratoga, equipped with all tools, materials, and safety gear needed to perform your job confidently and comfortably. Our team values consistent communication and provides ongoing support to help you thrive in your role.Job Type &amp; LocationThis is a Permanent position based out of Saratoga Springs, NY.Pay and BenefitsThe pay range for this position is $18.00 - $23.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Saratoga Springs,NY.Application DeadlineThis position is anticipated to close on Feb 28, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Janitorial Worker

Sheet Metal Technician - Multiple Openings In Shipyard$25-$32/hrJob Description<ul><li>Perform all tasks required to install bulkheads, ceilings, doors, windows, stairs, and furniture in various types of vessels or other marine structures. Transform the unfinished structure of a vessel into living, work, and leisure/recreation spaces.</li></ul>Responsibilities<ul><li>Assist in the installation and/or construction of bulkheads, ceiling panels, doors, trim, windows, rails, and hardware.</li><li>Install insulation in compartment floors, ceilings, or interior/exterior walls.</li><li>Use tools and equipment efficiently and safely for daily activities.</li><li>Apply caulking to windows, doors, wash basins, and toilet and shower modules.</li><li>Install adhesives, tiles, and carpeting in compartments.</li><li>Review compartment blueprints and sketches to assist in installations.</li><li>Assist in electrical work such as sizing, strapping, and pulling of cable, installation, and hook-ups on all lights, switches, equipment, and power panels.</li></ul>Skills<ul><li>Experience in shipyard or construction is required.</li><li>Ability to read and interpret blueprints and drawings.</li><li>Mechanically inclined with familiarity in joinery, carpentry, and insulation.</li><li>Competence in using hand and power tools.</li><li>Prior experience installing bulkheads, ceilings, doors, windows, stairs, and furniture in marine structures preferred.</li><li>Candidates from the construction industry or with sheet metal experience are ideal.</li><li>Capable of working in unfinished structures of a vessel.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of San Diego, CA.Pay and BenefitsThe pay range for this position is $25.00 - $32.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in San Diego,CA.Application DeadlineThis position is anticipated to close on Feb 25, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Joiner

<h3>Weld Machine Operator (2nd Shift)</h3>Location: Point of Rocks, MDEmployment Type: Full-Time<hr><h3>Position Overview</h3>We are seeking a skilled Weld Machine Operator to join our dynamic joist shop team. In this role, you will operate weld machines, monitor equipment performance, and collaborate on an assembly line to produce high-quality joists. This position offers hands-on training and opportunities to enhance your welding skills through specialized classes.<hr><h3>Key Responsibilities</h3><ul><li>Operate weld machines efficiently and ensure proper functionality.</li><li>Collaborate with team members on the assembly line to produce joists.</li><li>Read and interpret schematics for accurate assembly.</li><li>Operate laser machines and other equipment as required.</li><li>Perform general housekeeping tasks, including cleaning and sweeping.</li><li>Handle materials and perform touch-up painting as needed.</li></ul><hr><h3>Required Skills &amp; Experience</h3><ul><li>Experience with MIG, TIG, or Stick welding is a plus.</li><li>Ability to read and interpret schematics.</li><li>General labor and assembly skills.</li><li>Proficiency with hand tools.</li></ul><hr><h3>Preferred Qualifications</h3><ul><li>Trade school experience or prior work in a skilled trade environment.</li><li>Ability to work in a heavy industrial setting with exposure to loud noise, dirt, and metal.</li></ul><hr><h3>Why Join Us?</h3><ul><li>Production bonuses for high performance.</li><li>Tool allowance of $250–$300 and complimentary steel-toed boots.</li><li>Prescription eye protection is provided if needed.</li><li>Generous PTO: 2–3 weeks within the first two years, plus 7 sick days and 7 holidays.</li></ul><hr><h3>Work Environment</h3><ul><li>Manufacturing plant specializing in structural steel fabrication for bridge work.</li><li>Heavy industrial atmosphere with exposure to hot conditions in summer and cold conditions in winter.</li><li>Requires comfort working in a dirty, loud environment.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Point of Rocks, MD.Pay and BenefitsThe pay range for this position is $21.17 - $24.17/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Point of Rocks,MD.Application DeadlineThis position is anticipated to close on Feb 24, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Joist Shop (2nd Shift

Job Title: Electrician's Needed in Austin, Texas Job DescriptionWe are seeking an experienced Electrician to manage day-to-day electrical tasks on our construction sites. The role involves bending pipes, pulling wires of up to 200' of 3/4 conduit a day, installing fixtures, and performing terminations. The position also requires proficiency in reading blueprints.Responsibilities<ul><li>Bend and install conduit</li><li>Pull electrical wires and cables</li><li>Install lighting fixtures and complete electrical terminations</li><li>Read and interpret blueprints and technical drawings</li><li>Ensure all work complies with safety regulations</li><li>Collaborate with team members to achieve project goals</li></ul>Essential Skills<ul><li>At least 4-5 years of experience as an electrician in a commercial setting</li><li>Proficiency in electrical wiring and installation</li><li>Experience with conduit bending and pulling wire</li><li>Ability to read and interpret blueprints and schematics</li><li>Familiarity with standard electrical tools and cordless drills</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in commercial electrical work</li><li>Knowledge of technical drawing and agriculture-related electrical systems</li></ul>Why Work Here?Join a team with plenty of job opportunities to keep you engaged and busy. We offer a competitive hourly rate based on experience, with opportunities to work on prevailing wage projects at $43/hr.Work EnvironmentWork on new construction schools in Georgetown, TX and Round Rock. The standard work schedule is Monday to Friday, 7 AM to 4 PM, with the possibility of overtime and weekend work as needed. The dress code requires steel-toed boots, a vest, a hard hat, and safety glasses at all times on sitJob Type &amp; LocationThis is a Contract to Hire position based out of Austin, TX.Pay and BenefitsThe pay range for this position is $41.79 - $87.76/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Austin,TX.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Jorneyman Electrician

Job Title: Expert 5-Axis CNC Machinist - Aerospace PrecisionThe OpportunityJoin a stable and thriving aerospace leader where your craftsmanship meets advanced technology. We are seeking a Expert Journeyman CNC Machinist to lead our floor in a high-precision environment. You will go beyond standard operation by setting up and running complex 3, 4, and 5-axis equipment—including Haas VF-6 and TR-310 trunnions—while designing custom tooling and optimizing production processes. This is a role for a technical expert who enjoys troubleshooting advanced machining problems and mentoring the next generation of talent in a supportive, team-oriented shop.Responsibilities<ul><li>Understand basic and advanced machining techniques.</li><li>Set up and operate 3, 4, and 5 axis CNC equipment.</li><li>Verify products using basic inspection equipment.</li><li>Deburr parts and follow Quality Management Systems (QMS) procedures.</li><li>Meet productivity standards and follow job priority instructions.</li><li>Communicate production delays and problems to supervisors.</li><li>Document work movement in the ERP system.</li><li>Support the Manufacturing team to achieve company and departmental goals.</li><li>Maintain 6S and Lean manufacturing best practices.</li><li>Participate in team and company meetings.</li><li>Role model proper work ethics, behaviors, hygiene, and dress.</li><li>Design, specify, and create tooling and production processes on CNC equipment.</li><li>Provide training and recommend qualifications for specific processes and equipment.</li><li>Troubleshoot advanced machining problems and monitor production performance.</li><li>Participate in safety and quality investigations and recommend corrective action.</li><li>Manage time and attendance, including approval of time off and overtime.</li></ul>Essential Skills<ul><li>Experience with 3, 4, and 5 axis CNC machines.</li><li>Ability to interpret engineering drawings and specifications.</li><li>Basic understanding of inspection techniques.</li><li>Organizational and problem-solving skills.</li><li>Ability to work independently as well as part of a team.</li></ul>Additional Skills &amp; Qualifications<ul><li>Intermediate to advanced knowledge of machining processes.</li><li>Experience providing on-the-job training or mentoring.</li><li>Experience developing tooling and production processes.</li><li>Aptitude for supervisory skills and team leadership</li></ul>Why Work Here?Join a stable and thriving aerospace industry where you can grow your skills and career. Benefit from a supportive work environment that values teamwork and personal development.Work EnvironmentWork in an aerospace machine shop with a swing shift from 3:25 PM to 1:55 AM Monday through Thursday, and a weekend shift from 6:00 AM to 6:30 PM Friday through Sunday. Operate in a facility equipped with Haas and 5 axis machines, including a VF-6 and a TR-310 trunnion.Job Type &amp; LocationThis is a Contract to Hire position based out of Auburn, WA.Pay and BenefitsThe pay range for this position is $35.00 - $40.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Auburn,WA.Application DeadlineThis position is anticipated to close on Feb 28, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman CNC Machinist

Journeyman Electrician - Columbus, OH - Pay-$20-35Job DescriptionWe are seeking experienced commercial electricians to join a new hospital construction project. The role involves performing underground work, running conduit, and pulling wire.Responsibilities<ul><li>Perform underground electrical work.</li><li>Run conduit and pull wire for the construction project.</li><li>Install cables and cable trays effectively.</li><li>Bend and run various sizes of EMT and Rigid conduit.</li><li>Read and interpret blueprints with minimal supervision.</li><li>Work comfortably at heights and operate lifts.</li></ul>Essential Skills<ul><li>4+ years of relevant electrical experience in commercial or industrial settings.</li><li>Proficiency in installing cables and cable trays.</li><li>Experience in bending and running EMT and Rigid conduit.</li><li>Ability to read blueprints independently.</li><li>Possession of an OSHA 10 or higher certification</li></ul>Job Type &amp; LocationThis is a Contract position based out of Columbus, OH.Pay and BenefitsThe pay range for this position is $20.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Columbus,OH.Application DeadlineThis position is anticipated to close on Feb 26, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Electrician

Job Title: Journeyman ElectricianJob DescriptionWe are seeking a dedicated Journeyman Electrician to join our team in Adrian, MI. This role is ideal for those passionate about electrical work and eager to thrive in an industrial environment. We welcome entry-level journeymen who are enthusiastic and willing to learn.Pay90k PLUS OTResponsibilities<ul><li>Maintain and repair existing electrical equipment (120V, 480V, 3 Phase).</li><li>Install power supply wiring and conduit for new and existing equipment.</li><li>Respond to breakdowns and troubleshoot mechanical and electrical issues.</li><li>Complete tasks and preventative maintenance as assigned, including reading blueprints, wiring diagrams, process sheets, and assembly schematic drawings.</li><li>Troubleshoot and repair PLC systems and pneumatic controls.</li><li>Calibrate and adjust electrical/electronic equipment to manufacturer specifications.</li></ul>Essential Skills<ul><li>State of Michigan Journeyman Electrician license.</li><li>Experience with electrical systems, conduit bending, and pulling wire.</li><li>Ability to read and interpret technical diagrams and schematics.</li><li>Proficiency in troubleshooting and repairing PLC systems and pneumatic controls.</li><li>Comfortable working in a foundry setting with the ability to handle high temperatures and wear heat-protectant PPE.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in a union shop environment is a plus.</li><li>Familiarity with a family-owned business culture is advantageous.</li></ul>Why Work Here?Join a team that values dedication and skill, offering comprehensive benefits and the opportunity to join a union after 960 hours. We provide all necessary uniforms and PPE. Our company began as a family business and remains family-owned and operated, fostering a supportive and close-knit work culture.Work EnvironmentExpect to work 40-50 hours a week in a foundry setting. The environment involves high temperatures and loud noise, with protective gear provided. All equipment and technology necessary for your role are supplied, ensuring a safe and efficient work environment.Job Type &amp; LocationThis is a Permanent position based out of Adrian, MI.Pay and BenefitsThe pay range for this position is $87360.00 - $87360.00/yr.-Benefits
-Union shop, can join after 960 hours 
-All uniforms and ppe provided by Ervin 
-Consistent hours 
-Started as a family business and is still family owned and operatedWorkplace TypeThis is a fully onsite position in Adrian,MI.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Aerotek's client is looking for a Service Electrician to join their team in the Mount Airy, MD area Job Description<ul><li>You will have the opportunity to work on various projects in the NOVA/DC area, with occasional assignments in Montgomery County and Howard County. You will play a crucial role in overseeing electrical projects from start to finish, focusing on retail, small projects, and commercial service work.</li></ul>Responsibilities<ul><li>Oversee 1-3 helpers in project execution.</li><li>Manage electrical scope from start to finish on assigned projects.</li><li>Work on retail, small projects, and commercial service tasks.</li><li>Interpret and work from blueprints.</li></ul>Essential Skills<ul><li>Journeyman license in the electrical trade.</li><li>Minimum of 5 years' experience in the electrical trade.</li><li>Proficiency in conduit installation.</li></ul>Additional Skills &amp; Qualifications<ul><li>Additional hands-on experience is a plus.</li></ul>Why Work Here?<ul><li>Enjoy paid holidays, paid time off, and comprehensive benefits, including 50% paid medical coverage for employee dependents. Benefit from a 401k with a company match and discretionary profit sharing.</li></ul>Work Environment<ul><li>Work on small projects within the Commercial Service division. Be part of a dynamic team and enjoy opportunities to enhance your skills in a supportive environment.</li></ul>Qualified candidates will be given a call within 48 hours of submitting an application Job Type &amp; LocationThis is a Permanent position based out of Mount Airy, MD.Pay and BenefitsThe pay range for this position is $66560.00 - $79040.00/yr.competitive pay, health/dental/vision insurance, retirement (401k with match), PTO, life insurance, disability, and significant investment in employee education/training (paid for electrician certifications/degrees)Workplace TypeThis is a fully onsite position in Mount Airy,MD.Application DeadlineThis position is anticipated to close on Mar 2, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman ElectricianJob DescriptionWe are seeking a skilled Journeyman Electrician to join our team. The role involves cable tray installation, bending conduit (EMT and RIGID), and pulling wire.Responsibilities<ul><li>Install cable trays efficiently and safely.</li><li>Bend conduit, including EMT and RIGID, to precise specifications.</li><li>Pull wire through conduits and cable trays.</li></ul>Essential Skills<ul><li>5+ years of experience as an Electrician.</li><li>Proficiency in conduit bending.</li><li>Experience in cable tray installation.</li></ul>Additional Skills &amp; Qualifications<ul><li>Ability to pass a drug test and bg check.</li></ul>Why Work Here?This position offers a long-term opportunity to work on exciting projects at leading sites, such as Intel, Amkor, Lucid Motors, and LG Energy. Demonstrating strong performance can lead to permanent employment and potential pay increases.Work EnvironmentThe work is conducted at the Intel site with a shift from 5am to 3:30pm, Monday through Friday, totaling 50 hours a week. There may be occasional work on Saturdays.Job Type &amp; LocationThis is a Contract to Hire position based out of Chandler, AZ.Pay and BenefitsThe pay range for this position is $30.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Chandler,AZ.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Electrician - Claude, TX - Pay - $32 - 36/hr.We are seeking a skilled Journeyman Electrician to join our team. The ideal candidate will have strong experience in running conduit such as EMT and Rigid, installing field instruments like pressure transmitters, and running and pulling various types of wire sizes. This role requires proficiency with conduit benders, both hand and electric, and the ability to install enclosures. Experience with tools and equipment such as Sawzall and drills is essential, and a journeyman’s license is preferred. Additional experience with stainless steel pneumatic tubing, cable tray, terminations, and material/manpower takeoff is advantageous.<h2>Responsibilities</h2><ul><li>Run conduit using EMT and Rigid.</li><li>Utilize hand and electric conduit benders.</li><li>Install field instruments such as pressure transmitters.</li><li>Run and pull various types of wire sizes.</li><li>Install enclosures.</li><li>Use tools and equipment like Sawzall and drills.</li><li>Install stainless steel pneumatic tubing.</li><li>Perform terminations and work with cable tray.</li><li>Working 50-60+ hours a week</li></ul><h2>Essential Skills</h2><ul><li>Experience in calibration and troubleshooting.</li><li>Proficiency in electrical and instrumentation calibration.</li><li>Knowledge of construction, wiring, and pulling wire.</li><li>Expertise in bending conduit and pipe.</li></ul><h2>Additional Skills &amp; Qualifications</h2><ul><li>Journeyman’s license preferred.</li><li>Experience with material/manpower takeoffs.</li><li>Local candidates only.</li></ul><h2>Work Environment</h2>This position is based at a new construction site, providing an opportunity to work in a dynamic and evolving environment.<h2>Job Type &amp; Location</h2>This is a Contract to Hire position based out of Claude, Texas.Job Type &amp; LocationThis is a Contract to Hire position based out of Claude, TX.Pay and BenefitsThe pay range for this position is $36.00 - $38.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Claude,TX.Application DeadlineThis position is anticipated to close on Feb 24, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman ElectricianJob DescriptionJoin our team in Tucson, AZ, as we work on an exciting carport solar project. This role supports the electrical team to complete a solar carport system, with occasional work on commercial rooftop solar projects.Responsibilities<ul><li>Assist the electrical team in completing solar carport and commercial rooftop solar systems.</li><li>Perform conduit installation and conduit bending tasks.</li><li>Participate in outdoor construction activities.</li><li>Follow direction to ensure project efficiency and safety.</li></ul>Essential Skills<ul><li>At least 5+ years of electrical construction experience - Journeyman level</li><li>Ability to lift up to 75 pounds and remain on feet for 8-10 hours a day.</li><li>Capability to work in an outdoor environment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Solar experience is ideal but not required.</li><li>Scissor lift experience is highly beneficial.</li><li>Mechanical aptitude.</li><li>Reliable transportation.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Tucson, AZ.Pay and BenefitsThe pay range for this position is $35.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Tucson,AZ.Application DeadlineThis position is anticipated to close on Mar 4, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman ElectricianJob DescriptionWe are seeking a Journeyman Electrician with 4 + years of Journeyman level expereience to oversee a small crew responsible for installing energy-saving light fixtures and components. This role involves hands-on work with a team of 2-3 people and requires occasional travel to areas such as Virginia, Maryland, and North Carolina. -Looking for local candidates in the Richmond area, as well as candidates who are open to traveling throughout Virginia.Responsibilities<ul><li>Oversee and manage a crew of 2-3 technicians in the installation of energy-saving light fixtures.</li><li>Support the installation process by working hands-on with light fixtures and components.</li><li>Occasionally work with MC Cable and perform minimal wiring tasks.</li><li>Ensure projects are completed efficiently and to high standards.</li><li>Primarily operate within the Richmond Area with occasional travel to VA, MD, and NC.</li></ul>Essential Skills<ul><li>Electrical aptitude and experience in the electrical field.</li><li>Proficiency in installing light fixtures.</li><li>Experience as a lead technician or crew leader.</li></ul>Additional Skills &amp; Qualifications<ul><li>Electrical experience is preferred.</li><li>Demonstrated reliability and strong attendance record.</li></ul>Why Work Here?Join a rapidly growing company that values employee development by promoting from within. Enjoy significant contributions towards medical benefits, a company-paid wellness program, two weeks of paid time off, and paid holidays.Work EnvironmentWork as part of a small crew of about 3-4 people. The role involves hands-on tasks and requires occasional travel, primarily focusing on projects within the Richmond Area.Job Type &amp; LocationThis is a Contract to Hire position based out of Charlottesville, VA.Pay and BenefitsThe pay range for this position is $28.00 - $36.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Charlottesville,VA.Application DeadlineThis position is anticipated to close on Mar 5, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Traveling Licensed JourneymanElectricians – Data Center ConstructionAerotek is hiring multiple Traveling Licensed Journeyman Electricians for a large‑scale, new construction Data Center project in Ellendale, North Dakota. This is a travel assignment with consistent overtime, strong weekly take‑home pay, and per diem.To be considered, candidates MUST hold an active Journeyman Electrician license from a reciprocal state.Compensation &amp; Schedule Pay Rate: $56.65 per hourPer Diem: $115 per daySchedule:6 days per week12‑hour shifts60+ hours weekly (overtime is built in and ongoing)<ul><li> Estimated Weekly Take‑Home Pay: Approximately $5,000+ per week, depending on total hours worked</li><li>This project offers heavy, consistent overtime, making it an excellent opportunity for electricians seeking strong earnings on a travel job.</li></ul>Job Responsibilities<ul><ul></ul><li>Electricians will perform commercial and industrial electrical work, including:</li><li>Running and bending conduit (EMT and rigid)</li><li>Pulling and terminating wire</li><li>Installing lighting, switches, panels, and devices</li><li>Reading and interpreting blueprints and electrical schematics</li><li>Installing low‑ and medium‑voltage systems</li><li>Performing terminations and basic troubleshooting</li><li>Supporting data center electrical infrastructure installations</li><li> </li></ul>Required Experience<ul><ul></ul><li>Qualified candidates should have experience with:</li><li>Commercial or industrial electrical construction</li><li>Conduit bending and installation</li><li>Wire pulling and terminations</li><li>Panel and switchgear installation</li><li>Electrical schematics and blueprint reading</li><li>Lighting systems, EMT, and cable installation</li><li>Electrical troubleshooting and repairs</li></ul>Licensing Requirements (MANDATORY)<ul><li>Active</li><li> Journeyman Electrician license is required</li><li>License</li><li> must be current and in good standing</li><li>License</li><li> must be from a state with reciprocity for North Dakota, including: MN, SD, IA, AK, CO, ID, ME, MT, NE, NH, UT, WY</li></ul>Candidates without an active, reciprocal Journeyman license will not be eligible.<ul><li>Why This Opportunity</li><li>Traveling</li><li> position with per diem</li><li>Long‑term project with steady work</li><li>60+ hours per week consistently</li><li>Large‑scale data center construction experience</li><li>Weekly pay </li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Houston, Arkansas.Pay and BenefitsThe pay range for this position is $56.65 - $56.65/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Houston,Arkansas.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: 1st Shift Journeyman ElectricianJob DescriptionThis role will be responsible for troubleshooting and repairing mechanical, electrical, electronic, pneumatic, and hydraulic systems on all manufacturing equipment. A successful candidate will have a sense of urgency with a safety mindset.Responsibilities<ul><li>Install, maintain, and repair electrical systems including motors, control panels, lighting, power distribution, and machinery wiring.</li><li>Troubleshoot electrical malfunctions using appropriate testing devices and methods.</li><li>Read and interpret blueprints, schematics, and electrical diagrams.</li><li>Perform preventative maintenance to minimize downtime and improve equipment reliability.</li><li>Ensure all work complies with local, state, and national electrical codes and safety standards.</li><li>Maintain accurate records of repairs, modifications, and inspections.</li><li>Assist with new equipment installation and facility upgrades.</li><li>Identify and recommend improvements for electrical systems and processes.</li><li>Work closely with maintenance and production teams to support plant operations.</li><li>Follow all company safety policies, lockout/tagout procedures, and PPE requirements.</li><li>Respond to emergency electrical issues as needed, including potential overtime.</li></ul>Essential Skills<ul><li>Valid Journeyman Electrician Card.</li><li>Minimum of 3–5 years of industrial or commercial electrical experience preferred.</li><li>Strong knowledge of electrical systems, PLCs, VFDs, motor controls, and industrial automation a plus.</li><li>Ability to read and interpret electrical drawings and schematics.</li><li>Strong troubleshooting and problem-solving skills.</li><li>Ability to work independently and as part of a team.</li><li>Good communication and organizational skills.</li></ul>Additional Skills &amp; Qualifications<ul><li>Automotive experience is a plus.</li><li>Able to perform work responsibilities safely and ability to follow all safety rules and regulations.</li><li>Attention to detail and ability to manage multiple projects in a timely manner.</li><li>Strong mechanical aptitude with experience using hand tools, power tools, and fabrication techniques.</li></ul>Why Work Here?Enjoy a full benefits package starting on day 1 after completing 6 months. Join a large global company with many facilities around the United States and the globe. Benefit from overtime opportunities, including double time on Sundays.Work EnvironmentThe plant manufactures interior sound-deadening material for the automotive industry, characterized by a fast-paced and deadline-sensitive culture. The facility spans close to 300,000 sq. ft. The work schedule is 1st shift, 7:00 AM - 3:00 PM, Monday - Friday, with expectations of working most Saturdays until fully staffed. Some Sundays may be required, offering double time compensation.Job Type &amp; LocationThis is a Contract to Hire position based out of Battle Creek, MI.Pay and BenefitsThe pay range for this position is $32.00 - $40.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Battle Creek,MI.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman ElectricianJob DescriptionAs a Journeyman Electrician, you will play a crucial role in ensuring the safe and efficient installation, maintenance, and troubleshooting of electrical systems for commercial and industrial projects. You will work closely with architectural and electrical construction drawings and contribute to the successful completion of various electrical projects.Responsibilities<ul><li>Read and understand architectural and electrical construction drawings, ladder diagrams, symbols, and schedules.</li><li>Prepare sketches showing the location of wiring and equipment, ensuring concealed wiring is installed before the completion of walls, ceilings, or floors.</li><li>Troubleshoot motors, motor controls, motor control centers, magnetic motor starters, transformers, and other equipment.</li><li>Install and connect push-button controls, limit switches, pressure switches, float switches, flow switches, and other types of motor control devices.</li><li>Pull branch circuit wiring and feeder cables through conduit, and terminate or splice wires using approved methods and materials.</li><li>Connect wiring to lighting fixtures, motors, motor controllers, transformers, and other power equipment.</li><li>Install control and distribution systems, such as switches, relays, circuit breaker panels, and transformers, using approved fasteners.</li><li>Test continuity of circuits to ensure electrical compatibility and safety of components using various testing instruments.</li><li>Observe the function of installed equipment or systems to identify hazards and determine the need for adjustments, relocation, or replacement.</li><li>Layout and install electrical work for commercial and industrial projects from drawings, sketches, and specifications, following national code guidelines.</li><li>Measure, lay out, bend, and thread all types of electrical conduit (EMT, galvanized rigid, IMC, PVC).</li><li>Interact professionally with customers.</li><li>Adhere to OSHA safety standards.</li><li>Instruct and train apprentices.</li><li>Maintain daily time sheets.</li></ul>Essential Skills<ul><li>Extensive experience in laying out and installing commercial wiring.</li><li>Minimum of 4 years of on-the-job training in addition to classroom training.</li><li>Electrical troubleshooting, installation, and repair skills.</li><li>Ability to work independently.</li><li>Journeyman certification.</li><li>Valid Michigan driver's license.</li><li>Ability to travel to job sites and out of town when necessary.</li><li>Effective written and communication skills.</li><li>Blueprint reading experience.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with electrical conduit systems such as EMT, galvanized rigid, IMC, and PVC.</li><li>Capability to train or lightly train apprentices.</li></ul>Why Work Here?Join a team where the environment is vibrant and supportive, with a lot of projects lined up for Fall and Winter. Experience a great work atmosphere and managers who are committed to your growth and success.Work EnvironmentWork in an indoor commercial space within an occupied school building. The shift is from 3pm to 11pm, so expect to encounter students, teachers, and staff. Respect for the environment and its occupants is essential.Job Type &amp; LocationThis is a Contract to Hire position based out of WYANDOTTE, MI.Pay and BenefitsThe pay range for this position is $35.00 - $45.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in WYANDOTTE,MI.Application DeadlineThis position is anticipated to close on Feb 28, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman ElectricianJob DescriptionWe are seeking a skilled Journeyman Electrician to support the installation of electrical systems for infrastructure in data centers throughout Northern Virginia. The ideal candidate will have a strong experience in electrical construction and a proven track record of excellence in commercial environments.Responsibilities<ul><li>Install and repair control and distribution apparatus, including motors, relays, switches, thermostats, and circuit-breaker panels.</li><li>Measure, cut, and bend wire and conduit.</li><li>Troubleshoot issues and make recommendations to resolve them.</li><li>Interpret plans, sketches, wiring diagrams, and specifications.</li><li>Determine the method and sequence for installing electrical fixtures and equipment such as AC/DC motors, control panels, and PLCs.</li></ul>Essential Skills<ul><li>6 plus years of electrical construction experience.</li><li>4 plus years of commercial experience.</li><li>Journeyman license or equivalent electrical training and experience.</li><li>Valid Driver's license.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Fairfax, VA.Pay and BenefitsThe pay range for this position is $28.00 - $38.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Fairfax,VA.Application DeadlineThis position is anticipated to close on Feb 26, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Description:If you have Journeyman Electrician and Commercial experience and you're looking for a new position ASAP, then this is the position for you! A popular company in Thousand Oaks is looking for multiple Journeyman Electricians and a Chief Electrical Engineer to join their team! There is rapid interview process with the company so you can start ASAP!  Relevant Skills (not required):Commercial Electrician Experience / Journeyman License / Troubleshooting Electrical SystemsExperience Level:Entry - Expert Level Location:Thousand Oaks﻿Pay:$38 - 42 maybe more depending on experience Shift:Mon - Fri﻿7am - 3:30pmWed - Sat5am - 3:30pmApply right now and expect a call/text from Ryan with Aerotek 😊 Positions with this company are limited and will be filled quickly!Job Type &amp; LocationThis is a Contract to Hire position based out of Thousand Oaks, CA.Pay and BenefitsThe pay range for this position is $20.00 - $50.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
 
• Medical, dental &amp; vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Thousand Oaks,CA.Application DeadlineThis position is anticipated to close on Mar 5, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h2>Journeyman Electrician – Traveling (Contract-to-Hire)</h2>We are looking for a State-Licensed Journeyman Electrician to support nationwide equipment installations. This position requires a hands-on mindset, strong troubleshooting skills, and the ability to work collaboratively across multiple departments.A state-issued Journeyman License is required. (NCCER does not qualify.)<hr><h3>Responsibilities</h3><ul><li>Install specialized equipment on military bases across the United States.</li><li>Support other departments with electrical tasks and crossover scope as needed.</li><li>Troubleshoot, repair, and maintain 3‑phase motors, electrical controls, and related systems.</li><li>Travel extensively for project-based assignments.</li></ul><hr><h3>Essential Qualifications</h3><ul><li>Active Journeyman Electrician License from any U.S. state.</li><li>Experience working with 3-phase motors and electrical controls.</li><li>Strong electrical troubleshooting and technical problem‑solving skills.</li></ul><hr><h3>Additional Requirements</h3><ul><li>Willingness to travel for 6–8 weeks at a time, nationwide.</li><li>Flexible and open to overtime, including evenings or weekends.</li></ul><hr><h3>Why This Opportunity?</h3><ul><li>6‑month contract-to-hire with long‑term, permanent potential.</li><li>Live anywhere in the U.S.—this role is fully travel-based.</li><li>Company consistently secures new government contracts, offering clear advancement opportunities.</li><li>All travel expenses covered: flights, lodging, plus daily per diem.</li><li>Work exclusively on military bases within the fueling department.</li></ul><hr><h3>Work Environment &amp; Schedule</h3><ul><li>Typical schedule: Monday–Friday, 7:00 AM–5:00 PM, with opportunities for overtime.</li></ul><hr><h3>Job Type</h3>Contract-to-Hire | Travel Role<ul><li>Travel for 6–10 weeks, then 2 weeks home between rotations.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of San Antonio, TX.Pay and BenefitsThe pay range for this position is $33.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in San Antonio,TX.Application DeadlineThis position is anticipated to close on Mar 5, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Description
					Company specializes in commercial, and industrial electrical services, including dealership infrastructure, underground electrical systems, and control installations.
Install, maintain, and repair electrical systems in automotive dealerships, including lighting, power distribution, and service equipment.
Perform underground electrical installations, including trenching, conduit placement, and cable pulling.
Configure and troubleshoot electrical control systems for commercial and industrial applications.
Read and interpret blueprints, schematics, and technical drawings.

This is meant to be a long term role!
										Skills
					Electrical, Conduit, Wiring, Installation, Construction, Blueprint, commercial electrical, underground conduit
										Top Skills Details
					Electrical,Conduit,Wiring,Installation,Construction,Blueprint,commercial electrical,underground conduit
										Additional Skills &amp; Qualifications
					Familiarity with dealership infrastructure and control systems is a plus.
Ability to operate trenchers and other underground installation equipment.
Experience being able to train and guide less experienced electricians.
										Experience Level
					Entry Level
					Job Type &amp; LocationThis is a Contract to Hire position based out of Danville, IN.Pay and BenefitsThe pay range for this position is $35.00 - $40.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Danville,IN.Application DeadlineThis position is anticipated to close on Mar 3, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Traveling Licensed JourneymanElectricians – Data Center ConstructionAerotek is hiring multiple Traveling Licensed Journeyman Electricians for a large‑scale, new construction Data Center project in Ellendale, North Dakota. This is a travel assignment with consistent overtime, strong weekly take‑home pay, and per diem.To be considered, candidates MUST hold an active Journeyman Electrician license from a reciprocal state.Compensation &amp; Schedule Pay Rate: $56.65 per hourPer Diem: $115 per daySchedule:6 days per week12‑hour shifts60+ hours weekly (overtime is built in and ongoing)<ul><li> Estimated Weekly Take‑Home Pay: Approximately $5,000+ per week, depending on total hours worked</li><li>This project offers heavy, consistent overtime, making it an excellent opportunity for electricians seeking strong earnings on a travel job.</li></ul>Job Responsibilities<ul><ul></ul><li>Electricians will perform commercial and industrial electrical work, including:</li><li>Running and bending conduit (EMT and rigid)</li><li>Pulling and terminating wire</li><li>Installing lighting, switches, panels, and devices</li><li>Reading and interpreting blueprints and electrical schematics</li><li>Installing low‑ and medium‑voltage systems</li><li>Performing terminations and basic troubleshooting</li><li>Supporting data center electrical infrastructure installations</li><li> </li></ul>Required Experience<ul><ul></ul><li>Qualified candidates should have experience with:</li><li>Commercial or industrial electrical construction</li><li>Conduit bending and installation</li><li>Wire pulling and terminations</li><li>Panel and switchgear installation</li><li>Electrical schematics and blueprint reading</li><li>Lighting systems, EMT, and cable installation</li><li>Electrical troubleshooting and repairs</li></ul>Licensing Requirements (MANDATORY)<ul><li>Active</li><li> Journeyman Electrician license is required</li><li>License</li><li> must be current and in good standing</li><li>License</li><li> must be from a state with reciprocity for North Dakota, including: MN, SD, IA, AK, CO, ID, ME, MT, NE, NH, UT, WY</li></ul>Candidates without an active, reciprocal Journeyman license will not be eligible.<ul><li>Why This Opportunity</li><li>Traveling</li><li> position with per diem</li><li>Long‑term project with steady work</li><li>60+ hours per week consistently</li><li>Large‑scale data center construction experience</li><li>Weekly pay </li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Minneapolis, MN.Pay and BenefitsThe pay range for this position is $56.65 - $56.65/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Minneapolis,MN.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman Electrician $35-45 per hourLicense: Active JW License RequiredDuration: 6-month contract-to-hire (long term career)Job DescriptionWe are seeking a dedicated Lead Electrician to join our team for a multifamily project based in Longmont. This role requires candidates with an active Journeyman (JW) license, experience in underground installations, and experience in multifamily projects.Responsibilities<ul><li>Lead and guide apprentices and crew members.</li><li>Perform electrical installations on multifamily projects.</li><li>Manage underground electrical installations.</li><li>Collaborate with project teams to ensure timely completion of tasks.</li></ul>Essential Skills<ul><li>Active Journeyman (JW) license.</li><li>Experience with underground electrical installations.</li><li>Experience in multifamily electrical installation.</li><li>Foreman or lead experience is preferred.</li></ul>Additional Skills &amp; Qualifications<ul><li>Proven ability to guide and manage crews.</li><li>Experience in commercial construction.</li></ul>Why Work Here?Join a dynamic team focused on innovative projects in Northern Colorado. Benefit from a supportive work environment that values leadership and professional growth.Work EnvironmentThe role is based on a multifamily project in Longmont. Candidates will require their own personal protective equipment, including a hard hat, vest, safety glasses, and work boots. Hand and cordless tools should be brought by the candidate, while corded and large tools will be provided.Job Type &amp; LocationThis is a Contract to Hire position based out of Loveland, CO.Pay and BenefitsThe pay range for this position is $35.00 - $45.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Loveland,CO.Application DeadlineThis position is anticipated to close on Feb 23, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Electrician$38 / hr Job DescriptionWe are seeking experienced Journeyman Electricians for a unique opportunity in our Red Oak, TX location. This is a first-of-its-kind project focusing on industrial and commercial installations. Join our team to work on Prefab modular data centers and be part of a global company dedicated to creating connected technologies that enhance lives.Responsibilities<ul><li>Install, repair, and maintain the electrical parts of industrial equipment.</li><li>Work individually or as part of a team to successfully complete projects.</li><li>Follow safety procedures and adhere to electrical codes.</li><li>Interpret technical documents correctly for proper execution of assignments.</li><li>Conduct quality assurance measures and inspections.</li><li>Ensure that all administrative processes, including torque sheets, 5S (Five S), and tool inventory/tracking, are maintained.</li><li>Promote a 'Safety first' culture by leading through example and implementing all safety policies and procedures.</li></ul>Essential Skills<ul><li>High school diploma or equivalent (GED).</li><li>Associate degree/trade school certification in a related field.</li><li>Certificate of completion in an apprenticeship program, or journeyman experience.</li><li>Knowledgeable in pertinent electrical codes and regulations.</li><li>Industrial electrical experience preferred, commercial electrical experience accepted.</li><li>Ability to understand schematics and other technical documents.</li><li>Ability to bend conduit and install large cables.</li><li>Ability to lift up to 50lbs and work on ladders.</li><li>OSHA10 and/or OSHA30 certification.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with conduit, wiring, sensor installation, and blueprint reading.</li></ul>Why Work Here?This 90-day contract offers exposure to manufacturing modules for data centers, providing a significant opportunity for professional growth. Join a team of 20 other skilled Journeyman Electricians in a supportive and innovative environment.Work EnvironmentThe position is based in a climate-controlled manufacturing environment. You will work alongside 20 other Journeyman Electricians. The role requires adherence to safety protocols, with physical requirements including lifting up to 50lbs, and the ability to stand, walk, kneel, bend, and sit for extended periods.Job Type &amp; LocationThis is a Contract position based out of Red Oak, TX.Pay and BenefitsThe pay range for this position is $38.00 - $38.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Red Oak,TX.Application DeadlineThis position is anticipated to close on Feb 26, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman ElectricianJob DescriptionJoin our team as a Journeyman Electrician where you will construct, install, maintain, design, troubleshoot, and test electronic equipment, VFDs, PLCs, machinery, and components. You will conduct preventative maintenance and identify parts for replacement, ensuring all systems operate smoothly and efficiently.Responsibilities<ul><li>Inspect electrical and electronic systems, equipment, and components to identify hazards.</li><li>Test electrical and electronic systems and continuity of circuits in electrical wiring, circuit boards, and equipment using testing devices such as ohmmeters, voltmeters, and oscilloscopes.</li><li>Design, assemble, install, test, and maintain electrical and electronic equipment.</li><li>Diagnose malfunctioning systems, apparatus, and components using test equipment and hand tools to locate and correct issues.</li><li>Perform preventive maintenance according to the schedule and work instructions provided.</li><li>Specify electronics, sensors, VFDs, PLCs, instruments, and associated equipment.</li><li>Work with DC to 480V 3 phase electrical systems.</li><li>Understand and follow Lock-out Tag-out, Confined space, and Fall protection policies.</li><li>Maintain cleanliness and practice good housekeeping in work areas.</li></ul>Essential Skills<ul><li>Troubleshooting and PLC troubleshooting experience.</li><li>Electrical maintenance and industrial experience.</li><li>Proficiency with electrical testing, PLCs, and VFDs.</li><li>Ability to read and understand blueprints and schematics.</li><li>Experience in retrofitting and commissioning equipment.</li><li>Excellent physical condition and hand-eye coordination.</li><li>Experience with DC to 480V 3 phase electrical systems.</li></ul>Additional Skills &amp; Qualifications<ul><li>Previous industrial maintenance experience is required.</li><li>Hands-on experience with electronic testing and circuitry in a foundry or heavy industrial electrical company.</li><li>Familiarity with various tools and equipment.</li><li>Ability to read and understand technical and engineering specifications and instructions.</li><li>Thermocouple and machine network skills preferred.</li></ul>Why Work Here?Enjoy working in a union shop with excellent benefits, including health, dental, and vision insurance options, life and AD&amp;D coverage, and short-term and long-term disability coverage. Benefit from paid holidays, PTO, and a 401(k) plan with a company match. Take advantage of employee training and education reimbursement opportunities.Work EnvironmentThe work environment primarily involves government-contracted projects with contracts secured for the next six years. The facility spans 15 acres and includes several buildings with various specialties. It is characterized by a dirty, dark, and sometimes wet and hot atmosphere with large bay doors that remain open year-round, which may lead to cold conditions. Work hours are Monday through Friday, with shifts starting at 6 am or 7 am and ending at 2:30 pm or 3:30 pm.Job Type &amp; LocationThis is a Permanent position based out of Tacoma, WA.Pay and BenefitsThe pay range for this position is $74880.00 - $84052.80/yr.Union shop- Manufacturing Union
Successful applicants will be eligible for a sign-on bonus of up to $1,000 once you commence work with us*. ($500 on 1st Check/ $250 after 90 Days/ $250 after 6 months) If candidate does not make it through the year, the bonus will be paid back in full out of last paycheck.
Health, Dental, and Vision insurance options
Life and AD&amp;D coverage provided by Bradken
Short-Term and Long-Term Disability coverage provided by Bradken
Paid Holidays, PTO (80hrs upon start date) 
401(k) with a company match 4%
Employee Training and Education Reimbursement opportunitiesWorkplace TypeThis is a fully onsite position in Tacoma,WA.Application DeadlineThis position is anticipated to close on Feb 26, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman TechnicianJob DescriptionWe are seeking an experienced Journeyman Electrician with 4+ years of Journeyman experience to join our team. The ideal candidate will have solid knowledge in commercial or industrial electrical work and be capable of performing installations, repairs, and maintenance of electrical systems in healthcare environments.-Looking for Local candidates in Richmond area, as well as candidates who are open to traveling throughout Virginia w/per diem. Pay Ranges from $28-32/HR depending on experience.Responsibilities<ul><li>Install and repair electrical equipment and fixtures.</li><li>Troubleshoot motor and control systems.</li><li>Perform routine maintenance on electrical wiring and systems.</li><li>Drill holes and pull or push wiring through openings using hand and power tools.</li><li>Measure, cut, and bend wire and conduit (up to 4" PVC/EMT/Rigid).</li><li>Install lighting, receptacles, and pathways.</li></ul>Essential Skills<ul><li>4+ years of electrical experience.</li><li>Proficiency in wiring, installing, and running conduit.</li><li>Troubleshooting skills and pulling wire.</li><li>Understanding of electrical schematics and blueprints.</li><li>Experience with basic electrical hand and power tools.</li></ul>Additional Skills &amp; Qualifications<ul><li>Journeyman level skills preferred.</li><li>Journeyman Card preferred</li><li>Commercial or industrial knowledge.</li><li>Blueprint comprehension.</li><li>Mechanic level candidates are encouraged to apply.</li></ul>Why Work Here?Join a stable company focused on healthcare with a very low turnover rate. Enjoy comprehensive insurance benefits with no out-of-pocket costs for employees and minimal costs for family members.Work EnvironmentWork primarily in professional medical environments such as hospitals and outpatient units, focusing on renovation and fit-out projects. Operate in small crews with a professional appearance and adhere to safety protocols by wearing PPE including hard hats, safety vests, gloves, safety glasses, and steel or composite-toed boots. Enjoy standard day shift hours, scheduled for 48 hours per week, Monday through Friday. This is a contract-to-hire positionJob Type &amp; LocationThis is a Contract to Hire position based out of Richmond, VA.Pay and BenefitsThe pay range for this position is $28.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Richmond,VA.Application DeadlineThis position is anticipated to close on Mar 5, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman Electrician (Travel)Job DescriptionWe are seeking a state-certified journeyman electrician to work on commercial solar job sites. The role involves working with transformers, electrical rooms, AC electrical, disconnects, and combiners. The position requires travel throughout Northern California and the Central Valley 95% of the time.Responsibilities<ul><li>Install and maintain electrical systems on commercial solar sites including flat roofs, rooftops, ground mounts, and carports.</li><li>Work on transformers, electrical rooms, AC electrical, disconnects, and combiners.</li><li>Ensure proper grounding and bonding of commercial PV systems.</li><li>Utilize tools and testing equipment regularly for solar installations.</li><li>Read and interpret commercial electrical plans.</li><li>Train or lead other electricians when necessary.</li></ul>Essential Skills<ul><li>State-certified journeyman electrician.</li><li>Proficiency with electrical systems and solar installations.</li><li>Experience with conduit bending.</li><li>Ability to work independently and troubleshoot layout or wiring issues.</li><li>Experience with string inverters, central inverters, and microinverters.</li><li>Strong experience in reading and interpreting commercial electrical plans.</li></ul>Work EnvironmentThe work involves extensive travel throughout Northern California and the Central Valley. The travel time is recorded on the daily timecard from the starting location to the destination, offering a maximum of 10 hours per trip. The culture emphasizes teamwork and support, creating a collaborative and engaging work environment.Job Type &amp; LocationThis is a Contract to Hire position based out of Bakersfield, CA.Pay and BenefitsThe pay range for this position is $50.00 - $75.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bakersfield,CA.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Journeyman ElectricianJob DescriptionIn this role, you will work on various commercial and industrial electrical projects. There are several prevailing wage projects. Responsibilities<ul><li>Lead and supervise apprentices and journeymen in electrical projects.</li><li>Ensure the proper installation of electrical wiring and conduit.</li><li>Interpret and work from schematics and blueprints.</li><li>Oversee the pulling and installation of wires, as well as conduit bending and running.</li><li>Manage low voltage switchgear tasks.</li></ul>Essential Skills<ul><li>Proficient in electrical wiring and conduit installation.</li><li>Ability to read and interpret schematics and blueprints.</li><li>Skilled in pulling wire and bending conduit.</li><li>Experience with low voltage and switchgear systems.</li><li>Ability to work independently.</li><li>Reliable and hardworking.</li></ul>Additional Skills &amp; Qualifications<ul><li>Possession of a Journeyman card.</li></ul>Why Work Here?Join a dynamic environment with ample opportunities for growth and career advancement. Enjoy a supportive culture that values reliability and hard work.Work EnvironmentThe role involves working both indoors and outdoors, requiring flexibility and adaptability to different environments.Job Type &amp; LocationThis is a Contract to Hire position based out of Moses Lake, WA.Pay and BenefitsThe pay range for this position is $40.00 - $62.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Moses Lake,WA.Application DeadlineThis position is anticipated to close on Mar 2, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Electrician - Prevailing Wage

Job Title: Journeyman LinemanThe Journeyman Lineman will install, maintain, and repair overhead and underground distribution systems ranging from 4kV to 115kV. This role requires expertise in climbing poles, operating bucket trucks, stringing and splicing wire, installing poles and transformers, troubleshooting outages, reading schematics and staking sheets, and maintaining OSHA-compliant work zones. The position involves heavy equipment operation, meticulous documentation, and the safe execution of electrical line construction and maintenance across various terrains and weather conditions.Responsibilities<ul><li>Install and maintain overhead and underground distribution systems (4kV–115kV).</li><li>Climb poles and operate bucket trucks for access to high-voltage systems.</li><li>String and splice wire, and install poles and transformers.</li><li>Troubleshoot electrical outages and read schematics and staking sheets.</li><li>Maintain OSHA-compliant work zones for safety.</li><li>Operate heavy equipment necessary for the job.</li></ul>Essential Skills<ul><li>5+ years of high-voltage lineman experience.</li><li>Proficiency in climbing poles and working at heights.</li><li>Strong knowledge of rigging, grounding, and cover-up techniques.</li><li>Ability to read prints, schematics, and staking sheets.</li><li>Certification in CPR and First Aid.</li><li>Completion of OSHA 30 and OSHA 10 training.</li></ul>Additional Skills &amp; Qualifications<ul><li>Valid California Class A Driver’s License.</li><li>Graduation from IBEW/Cal-Nev JATC or a recognized lineman apprenticeship program.</li><li>Willingness to travel statewide as required.</li><li>Ability to lift up to 75 lbs and work outdoors in various weather conditions.</li><li>Capability to work extended hours and evenings.</li></ul>Why Work Here?Enjoy consistent year-round work in a company renowned for its strong safety culture and family-oriented environment. Benefit from opportunities for growth and leadership, comprehensive benefits, and being part of a company with a long-standing reputation for excellence in California’s electrical industry.Work EnvironmentThis role involves outdoor high-voltage field work on overhead and underground distribution systems. It requires climbing, working in bucket trucks, and operating heavy equipment. Employees must be prepared for exposure to varied weather conditions and travel throughout California.Job Type &amp; LocationThis is a Contract to Hire position based out of Bakersfield, CA.Pay and BenefitsThe pay range for this position is $30.00 - $45.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bakersfield,CA.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Lineman

Journeyman Maintenance Mechanic$38 - 42 hr 2nd and 3rd Job DescriptionAs a Journeyman Maintenance Mechanic, you will perform preventive maintenance, repairs, improvements, and modifications to production, utility, and facility equipment. This includes working with fermenters, drying equipment, baggers, palletizers, pumps, air compressors, boilers, and other mechanical equipment. You will provide training on the maintenance of mechanical equipment and systems, ensuring compliance with company standards, procedures, and government regulations.Responsibilities<ul><li>Conduct preventive maintenance, repairs, improvements, and modifications on various equipment.</li><li>Provide training on mechanical equipment and system maintenance in line with company standards and regulations.</li><li>Advise on equipment design, parts selection, documentation, testing, and problem-solving.</li><li>Perform welding, hydraulics, pneumatics, and fabrication tasks.</li><li>Assist with troubleshooting and diagnostics for equipment operations.</li><li>Conduct assembly, repair, and proactive maintenance for packaging, fermentation, utility, and facility equipment.</li><li>Review equipment operation to identify deficiencies or improvements for increasing OEE.</li><li>Read and interpret drawings and blueprints for equipment installation and repair.</li><li>Utilize precision measuring devices and machinist’s shop tools.</li></ul>Essential Skills<ul><li>Troubleshooting</li><li>Welding</li><li>Repair</li><li>Mechanical expertise</li><li>Hydraulics</li><li>Reading blueprints</li><li>Pneumatics</li><li>Rigging</li><li>Pump assembly</li><li>Heavy industrial millwright/mechanic work</li><li>Rotating equipment experience</li><li>Electrical wiring</li></ul>Additional Skills &amp; Qualifications<ul><li>Perform physical or mechanical tasks, including climbing stairs.</li><li>Effective prioritization and organization of work.</li><li>Commitment to working safely.</li><li>Acceptable attendance to meet company standards.</li><li>Ability to coordinate multiple activities and multitask.</li><li>Proven teamwork skills.</li><li>General maintenance skills.</li><li>Completion of all safety-related training required for job functions.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Chicago Heights, IL.Pay and BenefitsThe pay range for this position is $35.00 - $40.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Chicago Heights,IL.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Maintenance Mechanic

Job Title: Mobile PlumberJob DescriptionAs a Mobile Plumber, you will be responsible for the day-to-day operation and upkeep of the site's water and sewerage systems. This role involves performing both preventative and corrective maintenance across a range of plumbing infrastructure. You will require hands-on experience with these systems and proficiency in the tools and techniques needed to maintain them effectively. Additionally, you may be tasked with general maintenance and support tasks as operational needs arise.Responsibilities<ul><li>Demonstrate knowledge of plumbing building equipment and systems required to operate and maintain plumbing equipment and systems.</li><li>Perform Backflow Certifications with available training reimbursement.</li><li>Anticipate potential problems and take appropriate actions to maximize the condition of facility structures and assets.</li><li>Plan and layout work details in the assembly, installation, testing, maintenance, and repair of a wide variety of plumbing systems and equipment.</li><li>Troubleshoot and correctly repair all aspects of plumbing systems.</li><li>Read and interpret blueprints and plumbing schematics.</li><li>Interact with clients and maintenance staff to determine the best approach to completing assignments in a safe, environmentally compliant manner.</li><li>Safely use a large variety of hand and shop power tools.</li><li>Complete all documentation by required deadlines and document accurately in the computerized maintenance management system (CMMS) in real time.</li><li>Perform all incidental and associated work required to complete job assignments.</li><li>Work with minimal supervision and proactively communicate with the manager.</li><li>Maintain work area and equipment in a safe, efficient, and clean operating condition.</li><li>Strictly adhere to all safety rules and regulations.</li><li>Assist in performing other duties, including work of other trades as required.</li></ul>Essential Skills<ul><li>Advanced plumbing system knowledge including water supply, drainage, venting, sewer systems, fixtures, pumps, valves, and piping materials.</li><li>Troubleshooting and diagnostics skills with the ability to quickly identify issues and implement effective repairs.</li><li>Proficiency in installation and repair, skilled in assembling, installing, maintaining, and repairing plumbing systems in various settings.</li><li>Ability to read and interpret blueprints and schematics accurately.</li><li>Backflow prevention expertise, including testing, repairing, and certifying backflow devices.</li><li>Knowledge of code compliance, including local plumbing codes, building regulations, and OSHA safety standards.</li><li>Skills in soldering, brazing, and pipefitting with various materials.</li><li>Confident use of hand tools, power tools, pipe threading machines, inspection cameras, and diagnostic equipment.</li><li>Preventative maintenance skills to assess system condition and perform routine maintenance.</li></ul>Additional Skills &amp; Qualifications<ul><li>High school diploma or state equivalent required.</li><li>Valid state driver’s license is required.</li><li>Plumbing Journeyman’s and/or State License is required.</li><li>Backflow certification is required (or ability to obtain within the first 90 days of employment).</li><li>Knowledge of OSHA standards and local codes.</li><li>Good verbal and written communication skills.</li><li>Physically able to operate hand tools, work on a ladder, carry tools, lift and carry heavy loads, operate required equipment, and operate a motor vehicle.</li></ul>Why Work Here?Working here offers you the chance to be part of a dynamic team where your skills are valued and expanded. The company provides a supportive work environment with a focus on safety and professional growth. You will have access to a company vehicle and the opportunity to work in diverse settings around the DFW metroplex, all while maintaining a regular Monday to Friday schedule.Work EnvironmentThis position requires working as a mobile plumber around the DFW metroplex. The schedule is Monday to Friday, from 8:00 am to 4:30 pm. The company provides a vehicle for work-related travel. The role involves working in various conditions, including extreme temperatures and confined spaces. Physical demands include lifting up to 80 lbs, working from heights, and operating a variety of tools and equipment.Job Type &amp; LocationThis is a Contract to Hire position based out of Dallas, TX.Pay and BenefitsThe pay range for this position is $33.00 - $38.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully remote position.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Plumber

Job Title: Journeyman PlumberJob DescriptionWe are seeking a highly skilled Journeyman Plumber/Pipefitter with proven experience in commercial and industrial piping installations. The ideal candidate will be proficient in performing accurate layouts, material takeoffs, and installation of large-scale CPVC systems, including elevated pipe runs. This role requires strong technical ability, attention to detail, and the capability to work independently or as part of a team on complex piping projects.Responsibilities<ul><li>Perform precise layouts and material takeoffs for large piping systems, including projects involving approximately 5,000 linear feet of 2” and 3” Schedule 80 CPVC.</li><li>Install, support, and secure elevated CPVC piping in accordance with project specifications, industry standards, and safety requirements.</li><li>Interpret and work from blueprints, isometric drawings, P&amp;IDs, and project documentation.</li><li>Measure, cut, prep, and join CPVC piping using approved methods and manufacturer guidelines.</li><li>Coordinate with supervisors, project managers, and other trades to ensure efficient workflow and timely project completion.</li><li>Troubleshoot piping issues, identify conflicts, and propose effective solutions.</li><li>Maintain a clean, safe, and organized work environment.</li></ul>Essential Skills<ul><li>Minimum 5+ years of experience in commercial or industrial plumbing/pipefitting.</li><li>Demonstrated ability to perform large-scale piping layouts and takeoffs with accuracy.</li><li>Strong working knowledge of Schedule 80 CPVC systems, including installation in elevated or overhead environments.</li><li>Ability to lift, climb, and work at heights using lifts, scaffolding, or platforms.</li><li>Proficiency with hand tools, power tools, and pipe-fitting techniques.</li><li>Excellent problem-solving skills and the ability to work independently with minimal supervision.</li><li>Reliable transportation and consistent jobsite attendance.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in construction, plumbing, and PVC systems.</li><li>Strong communication and coordination skills.</li></ul>Why Work Here?After six months, employees receive 100% coverage of the basic insurance plan. After one year, or close to 1,000 working hours, employees benefit from a 4% 401K match. While per diem is not offered, travel expenses are covered if commuting over 60 miles, including hotel accommodations and daily allowances.Work EnvironmentThe work environment includes working with advanced piping technologies and equipment in various commercial and industrial settings. Employees are expected to maintain a clean and safe workspace while wearing appropriate safety gear. Overnight travel accommodations include hotel stays with shared or private rooms based on position level.Job Type &amp; LocationThis is a Contract to Hire position based out of West Memphis, AR.Pay and BenefitsThe pay range for this position is $27.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in West Memphis,AR.Application DeadlineThis position is anticipated to close on Mar 1, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Plumber in Knoxville, TN Job DescriptionWe are seeking a skilled Journeyman Plumber to join our team. The ideal candidate will have a keen eye for detail and a thorough understanding of plumbing systems and installation techniques.Responsibilities<ul><li>Study building plans and working drawings to determine required work aids and installation sequences.</li><li>Inspect structures to identify obstructions and avoid weakening during pipe installation.</li><li>Cut openings in walls and floors to accommodate pipes and fittings.</li><li>Bend pipes to required angles using pipe-bending machines or manual techniques.</li><li>Assemble and install valves, pipe fittings, and pipes made of various metals and nonmetals.</li><li>Join pipes using screws, bolts, fittings, solder, plastic solvent, and caulking techniques.</li><li>Test plumbing systems with water or air and read pressure gauges to ensure system integrity.</li><li>Perform maintenance by replacing washers, mending burst pipes, and unclogging drains.</li><li>Understand and interpret all contract documents and specifications.</li></ul>Essential Skills<ul><li>Proficiency in construction, plumbing, and mechanical systems.</li><li>Ability to read and interpret blueprints and piping designs.</li><li>Experience with pipe installation, PVC, and commercial construction.</li><li>Skilled in soldering, working with cast iron, and using hand tools.</li><li>Knowledge of pipe fitting, pipe welding, threading, and plumbing design.</li><li>Experience in pipe bending and working with wrenches and water systems.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in plumbing design and commercial construction projects.</li></ul>Why Work Here?Join a team that values expertise and precision. We offer opportunities for professional growth in a supportive environment. Our culture promotes collaboration and innovation, providing a great work-life balance.Work EnvironmentWork in various environments involving both indoor and outdoor settings. Use a range of tools and machinery, including pipe-bending machines and soldering equipment. The position may require lifting heavy materials and working in tight spaces.Job Type &amp; LocationThis is a Contract to Hire position based out of Knoxville, TN.Pay and BenefitsThe pay range for this position is $20.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Knoxville,TN.Application DeadlineThis position is anticipated to close on Feb 28, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Plumber in Knoxville, TN Job DescriptionWe are seeking a skilled Journeyman Plumber to join our team. The ideal candidate will have a keen eye for detail and a thorough understanding of plumbing systems and installation techniques.Responsibilities<ul><li>Study building plans and working drawings to determine required work aids and installation sequences.</li><li>Inspect structures to identify obstructions and avoid weakening during pipe installation.</li><li>Cut openings in walls and floors to accommodate pipes and fittings.</li><li>Bend pipes to required angles using pipe-bending machines or manual techniques.</li><li>Assemble and install valves, pipe fittings, and pipes made of various metals and nonmetals.</li><li>Join pipes using screws, bolts, fittings, solder, plastic solvent, and caulking techniques.</li><li>Test plumbing systems with water or air and read pressure gauges to ensure system integrity.</li><li>Perform maintenance by replacing washers, mending burst pipes, and unclogging drains.</li><li>Understand and interpret all contract documents and specifications.</li></ul>Essential Skills<ul><li>Proficiency in construction, plumbing, and mechanical systems.</li><li>Ability to read and interpret blueprints and piping designs.</li><li>Experience with pipe installation, PVC, and commercial construction.</li><li>Skilled in soldering, working with cast iron, and using hand tools.</li><li>Knowledge of pipe fitting, pipe welding, threading, and plumbing design.</li><li>Experience in pipe bending and working with wrenches and water systems.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in plumbing design and commercial construction projects.</li></ul>Why Work Here?Join a team that values expertise and precision. We offer opportunities for professional growth in a supportive environment. Our culture promotes collaboration and innovation, providing a great work-life balance.Work EnvironmentWork in various environments involving both indoor and outdoor settings. Use a range of tools and machinery, including pipe-bending machines and soldering equipment. The position may require lifting heavy materials and working in tight spaces.Job Type &amp; LocationThis is a Contract to Hire position based out of Knoxville, TN.Pay and BenefitsThe pay range for this position is $20.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Knoxville,TN.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Aerotek is hiring a journeyman plumber for a plumbing company in Spokane.What you will be doing…• Assist with installation of plumbing systems for commercial, industrial, and residential new construction projects• Install pipes, valves, fittings, drainage systems, fixtures, etc.• Participate in job site final walk through.• Provide input relating to the resolution of any design or installation issues.• Ensure all plumbing work is in compliance with applicable regulations and trade practices.What you have…• Washington Journey Level Plumber Card PL01 or Residential PL02• Experience installing plumbing systems for new construction commercial, industrial, and/or residential buildings• Apprentices will be consideredWhat you get…• A full time (day shift) and long-term job with room for growth• Weekly pay - starts at $37 - 45/hr (depends on experience)• Opportunity for pay increases and advancement to higher roles within the company• Benefits including health insurance and 401k• Opportunity to work overtimeJob Type &amp; LocationThis is a Contract to Hire position based out of Spokane, WA.Pay and BenefitsThe pay range for this position is $40.00 - $50.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Spokane,WA.Application DeadlineThis position is anticipated to close on Mar 3, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Plumber - Charlotte, MI<ul><li>Direct Hire </li><li>$37-44 per hour </li><li>Competitive Benefits </li></ul>Job DescriptionWe are seeking a dedicated Journeyman Plumber to provide exceptional service to residential customers. This role involves handling a variety of plumbing tasks, including water treatment, water heaters, piping, fixture repair, and remodels.Responsibilities<ul><li>Service residential customers with water treatment, including water softeners, iron curtains, and whole house filters.</li><li>Install and replace water tank and tankless water heaters.</li><li>Perform water and drain piping work.</li><li>Repair and replace fixtures.</li><li>Assist in bathroom and kitchen remodels.</li></ul>Essential Skills &amp; Qualifications<ul><li>State of Michigan Journeyman License.</li><li>5+ years of residential plumbing experience.</li><li>Experience in water conditioning and softening is beneficial.</li><li>Backflow certification is a plus.</li><li>Valid driver's license.</li></ul>Why Work Here?Join a new and growing company with opportunities to advance into leadership roles. Benefit from being part of a team that is expected to experience significant growth, providing room for career development and progression.Work EnvironmentWork will be conducted in occupied residential spaces, focusing on service-oriented tasks.Job Type &amp; LocationThis is a Permanent position based out of Charlotte, MI.Pay and BenefitsThe pay range for this position is $79000.00 - $92000.00/yr.Benefits provided during interview.Workplace TypeThis is a fully onsite position in Charlotte,MI.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h2>Journeyman Service Plumber</h2>We are hiring an experienced, customer‑focused Journeyman Plumber to handle commercial and residential service work. This role is ideal for someone who is friendly, outgoing, and confident in diagnosing and completing plumbing repairs while providing excellent customer service.Responsibilities• Respond to service calls, inspect issues, diagnose problems, and present solutions and estimates.• Install and repair sinks, toilets, tubs, disposals, dishwashers, softeners, and all water heater types (gas, electric, tankless).• Perform preventative maintenance and full‑system evaluations.• Conduct sewer and drain cleaning in basements, roofs, crawl spaces, and confined areas.• Restore work sites, prepare invoices, collect payments, and explain service guarantees.• Travel between multiple daily service calls.Requirements• Valid driver’s license and Journeyman license.• Five or more years of service and repair plumbing experience.• Strong customer communication skills; friendly and approachable.• Knowledge of PVC, cast iron, copper, fixtures, drains, and water heaters.• Ability to obtain Backflow Certification, OSHA 10, and Excavation Certification (company supported).• Basic hand tools required; major tools provided.Compensation and Benefits• Weekly pay with separate checks for commission and mileage.• Mileage paid from home each morning at 70 cents per mile.• Average earnings around $100,000; range from $60,000 to $200,000+ based on weekly production.• Commission structure includes 20% on billings, 3% on referrals, and $25 per Google review.• Drive/mileage pay typically adds $300–$700 weekly.• 12‑week paid training program at $27/hr.• Company‑provided phone, tablet, and service van.• Quarterly reviews and steady first‑shift schedule with 8‑hour days between 7 a.m. and 8 p.m.Job Type &amp; LocationThis is a Permanent position based out of Denver, CO.Pay and BenefitsThe pay range for this position is $60000.00 - $200000.00/yr.Medical insurance with a Prescription Drug Card
Accident and Critical Illness Insurance
Dental Insurance
Vision Insurance
Paid Vacation
Paid Training
Life Insurance
Matching 401K Retirement Savings Plan
Tuition Reimbursement
Profit SharingWorkplace TypeThis is a fully onsite position in Denver,CO.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Service Plumber

Journeyman Welder (Aerospace) - Immediately Hiring - Career OpportunityJob Description<ul><li>We are seeking a skilled Welder to perform TIG/MIG welding on assemblies and assist journeyman welders with fit-up and fabrication tasks. This role requires working on-site in El Cajon, CA, four days a week and involves reading blueprints, using fixtures, and operating hand grinders.</li></ul>Responsibilities<ul><li>Perform TIG/MIG welds on assemblies.</li><li>Assist with fit-up and fabrication as per drawings.</li><li>Operate hand grinders efficiently.</li><li>Weld exotic materials such as alloys, Inconel, and 300/400 series stainless steel.</li><li>Handle various material thicknesses including .032, .060, .090, and .0188.</li><li>Utilize back gaps in welding processes.</li><li>Set up weld machines and adjust settings such as amperage and weld symbols.</li></ul>Essential Skills<ul><li>Proficient in TIG and MIG welding.</li><li>Skilled in reading and interpreting blueprints.</li><li>Experience with welding assemblies and fixture usage.</li><li>Knowledge of GTAW and GMAW welding techniques.</li><li>Ability to weld various exotic materials including alloys and Inconel.</li></ul>Additional Skills &amp; Qualifications<ul><li>Possess own welding hood.</li><li>Willingness to work on assigned jobs within and outside the welding field.</li><li>Ability to fabricate parts under supervision.</li><li>Experience in documenting work details such as type of rod used and type of weld.</li><li>Skill in identifying materials and organizing them on traveler.</li></ul>Work Environment<ul><li>This position is based on-site in El Cajon, CA, requiring four days of work per week. The role involves working with various welding technologies and equipment, including handling and operating heavy-duty machines and hand tools. The environment is dynamic and requires adherence to safety regulations.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of El Cajon, CA.Pay and BenefitsThe pay range for this position is $30.00 - $40.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in El Cajon,CA.Application DeadlineThis position is anticipated to close on Mar 5, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Journeyman Welder

<h1>Kitting Specialist - $20-$22 per hour - 1st Shift - Chattanooga, TN</h1>Position Overview We are seeking a reliable and detail‑oriented Kitting Specialist to support our production and shipping operations. This role requires strong attention to detail, the ability to read and compare parts using prints, and the physical capability to handle materials safely and efficiently.<h2></h2><h2>Key Responsibilities</h2><ul><li>Review and interpret prints to verify that parts on pallets match required specifications.</li><li>Identify, compare, and confirm part similarities or differences before staging.</li><li>Lift, move, and handle materials weighing up to 55–60 lbs consistently.</li><li>Stand for extended periods while preparing and wrapping products for shipment.</li><li>Apply saran wrap securely around finished product prior to staging.</li><li>Operate forklifts safely to transport materials throughout the facility.</li><li>Use a tape measure accurately to verify dimensions and ensure quality standards.</li><li>Maintain a clean, organized, and safe work area.</li><li>Support shipping, receiving, and inventory processes as needed.</li></ul><h2>Qualifications</h2><ul><li>Forklift experience required (certification preferred).</li><li>Ability to read and interpret basic prints or diagrams.</li><li>Proficient with tape measure use and basic measurement skills.</li><li>Ability to lift 55–60 lbs repeatedly.</li><li>Comfortable standing, walking, and performing physical tasks throughout the shift.</li><li>Strong attention to detail and accuracy.</li><li>Reliable attendance and strong work ethic.</li></ul><h2>Work Environment</h2><ul><li>Fast‑paced warehouse/production setting.</li><li>Frequent material handling and movement.</li><li>Team‑oriented environment with a focus on safety and quality.</li></ul>Experience LevelIntermediate LevelJob Type &amp; LocationThis is a Contract to Hire position based out of CHATTANOOGA, TN.Pay and BenefitsThe pay range for this position is $20.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in CHATTANOOGA,TN.Application DeadlineThis position is anticipated to close on Feb 27, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Kit Assembly Specialist

Warehouse Worker$ 20/hourJob DescriptionAs a kitter, you will be responsible for assembling and packaging products for our customers. This involves opening boxes, using a computer to manage inventory, and repackaging items into new boxes or shipping sleeves as required. The role requires physical activity, including standing, bending, kneeling, and walking for 8 hours a day, and the ability to lift up to 40 lbs.Responsibilities<ul><li>Assemble and package products according to customer needs.</li><li>Open boxes and manage inventory using a computer system.</li><li>Repackage products into new boxes or shipping sleeves.</li><li>Maintain a clean and organized workspace.</li><li>Ensure accurate inventory management.</li></ul>Essential Skills<ul><li>Experience in packing and kitting.</li><li>Proficient computer skills for inventory management.</li><li>Minimum 6 months of warehouse experience.</li></ul>Additional Skills &amp; Qualifications<ul><li>Skills in material handling.</li><li>Experience in warehouse packing and picking.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Carol Stream, IL.Pay and BenefitsThe pay range for this position is $20.00 - $20.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Carol Stream,IL.Application DeadlineThis position is anticipated to close on Feb 28, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Kitter

<h2>Kitter / Material Handler (Day Shift – High OT)</h2>Shift: Day Shift, 7:00 AM – 3:30 PMOvertime: Significant overtime required – must be open and flexible<h3>Position Overview</h3>We are looking for a strong Kitter / Material Handler—someone experienced, reliable, and a true go‑getter. <h3>Key Responsibilities</h3><ul><li>Kitting and material handling to support production and operations</li><li>Order fulfillment and reverse fulfillment</li><li>Accurate inventory control and material tracking</li><li>Moving, staging, and organizing materials efficiently</li><li>Maintaining a clean and organized work area</li><li>Supporting team needs in a fast-paced environment</li></ul><h3>What We’re Looking For</h3><ul><li>Proven experience in material handling / kitting</li><li>Strong understanding of inventory control</li><li>Self-starter mentality — minimal supervision needed</li><li>High sense of urgency and accountability</li><li>Willingness to work a lot of overtime</li><li>Dependable, motivated, and team-oriented</li></ul><h3>Why This Role</h3><ul><li>Consistent day shift schedule</li><li>Plenty of overtime hours available</li><li>Opportunity to make an immediate impact</li><li>Fast-moving environment for someone who likes to stay busy</li></ul>Essential Skills<ul><li>Experience with cycle counts, inventory control, and material handling.</li><li>Proficiency in using NetSuite ERP software for inventory management.</li><li>Strong computer skills, particularly in ERP systems, inventory, and shipping and receiving.</li></ul>Work EnvironmentThe work environment is a clean warehouse setting with seven employees. You will be required to climb ladders of varying sizes and regularly lift up to 50 lbs. The role involves standing, walking, and sitting for extended periods, and demands good manual dexterity and hand-eye coordination. You will also need to stoop, kneel, crouch, climb, and balance, with the ability to operate material handling equipment.Job Type &amp; LocationThis is a Contract position based out of Fremont, CA.Pay and BenefitsThe pay range for this position is $25.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Fremont,CA.Application DeadlineThis position is anticipated to close on Mar 6, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Kitting Specialist

<h2>Kitter / Material Handler (Day Shift – High OT)</h2>Shift: Day Shift, 7:00 AM – 3:30 PMOvertime: Significant overtime required – must be open and flexible<h3>Position Overview</h3>We are looking for a strong Kitter / Material Handler—someone experienced, reliable, and a true go‑getter. <h3>Key Responsibilities</h3><ul><li>Kitting and material handling to support production and operations</li><li>Order fulfillment and reverse fulfillment</li><li>Accurate inventory control and material tracking</li><li>Moving, staging, and organizing materials efficiently</li><li>Maintaining a clean and organized work area</li><li>Supporting team needs in a fast-paced environment</li></ul><h3>What We’re Looking For</h3><ul><li>Proven experience in material handling / kitting</li><li>Strong understanding of inventory control</li><li>Self-starter mentality — minimal supervision needed</li><li>High sense of urgency and accountability</li><li>Willingness to work a lot of overtime</li><li>Dependable, motivated, and team-oriented</li></ul><h3>Why This Role</h3><ul><li>Consistent day shift schedule</li><li>Plenty of overtime hours available</li><li>Opportunity to make an immediate impact</li><li>Fast-moving environment for someone who likes to stay busy</li></ul>Essential Skills<ul><li>Experience with cycle counts, inventory control, and material handling.</li><li>Proficiency in using NetSuite ERP software for inventory management.</li><li>Strong computer skills, particularly in ERP systems, inventory, and shipping and receiving.</li></ul>Work EnvironmentThe work environment is a clean warehouse setting with seven employees. You will be required to climb ladders of varying sizes and regularly lift up to 50 lbs. The role involves standing, walking, and sitting for extended periods, and demands good manual dexterity and hand-eye coordination. You will also need to stoop, kneel, crouch, climb, and balance, with the ability to operate material handling equipment.Job Type &amp; LocationThis is a Contract position based out of Fremont, CA.Pay and BenefitsThe pay range for this position is $25.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Fremont,CA.Application DeadlineThis position is anticipated to close on Feb 26, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Class A CDL Driver (Local trips from Lawrence) Home dailyPay: $24.72/hourShift: Openings on evenings and overnight schedules.Job DescriptionAs a CDL Driver, you will be responsible for performing all tasks related to product handling and delivering goods to customers safely and promptly. This role requires adherence to product specifications, company policies, and acceptable standards. You must be available for a minimum of two overnight stays per week. This position involves touch freight and requires unloading assistance at delivery points.Responsibilities<ul><li>Atleast 1+ year of CDL and Driving experience.</li><li>Drive safely, adhering to all DOT regulations for extended periods.</li><li>Read and converse in English to understand highway traffic signs and signals, respond to official inquiries, and make entries on reports and records.</li><li>Load, unload, prepare, inspect, and operate a delivery vehicle in this touch freight role.</li><li>Perform warehousing and merchandise handling tasks in all phases of operation.</li><li>Provide customer assistance by completing required staging and assembly tasks.</li><li>Ensure safe and timely deliveries to customers.</li><li>Accurately load customers and inspect for damaged materials.</li><li>Provide personal attention to customer requests or product needs during loading.</li><li>Maintain and practice company and DOT safety policies and procedures.</li><li>Ensure building and product security, including inventory and damage control.</li><li>Maintain Federal and State required logs.</li><li>Handle cash and company credit card responsibly, submitting timely expense reports.</li><li>Serve as a backup driver for transporting material to Kansas manufacturing facilities.</li><li>Assist in the completion of production orders.</li><li>Accurately unload and receive incoming products.</li><li>Perform other duties as reasonably assigned.</li></ul>Essential Skills<ul><li>Valid Class A CDL and meet the minimum DOT age requirement of 21 years old.</li><li>Three to five years of driving experience.</li><li>Clear and effective written and oral communication in English.</li><li>Superb driving record.</li><li>Ability to operate power tools.</li><li>Mechanically inclined.</li></ul>Additional Skills &amp; Qualifications<ul><li>Customer service oriented.</li><li>Experience with forklift operations.</li><li>Ability to perform manual tasks that require precision and dexterity.</li></ul>Why Work Here?Join a dynamic team that values safety, precision, and customer satisfaction. Enjoy a supportive work environment that emphasizes professional growth and provides opportunities for advancement.Work EnvironmentThis role involves being on the road for overnight runs a couple of days a week, driving a CDL truck, and assisting with unloading the truck. The position requires physical activity, including lifting, pushing, and pulling tasks, with the necessary precautions taken to ensure safety and teamwork.Job Type &amp; LocationThis is a Permanent position based out of Lawrence, KS.Pay and BenefitsThe pay range for this position is $72800.00 - $72800.00/yr.Benefits include Medical/Dental/Vision, Paid Time Off, Paid Holidays from day one, tuition reimbursement, and a 401k plan (with an automatic 3% company contribution, regardless of your contribution after your first year of employment) among others.Workplace TypeThis is a fully onsite position in Lawrence,KS.Application DeadlineThis position is anticipated to close on Mar 5, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

LOCAL Class A CDL Driver *URGENT*

<h2>Job Title: Labeling Technician</h2><h3>Job Summary</h3>We are seeking a detail-oriented Labeling Technician to prepare, inspect, and apply labels to products in accordance with industry standards, safety requirements, and government regulations. This role plays a critical part in product tracking, safety, quality assurance, and regulatory compliance. The ideal candidate is organized, precise, and comfortable working with labeling equipment in a production environment.<hr><h3>Key Responsibilities</h3><ul><li>Prepare, print, inspect, and apply labels to products and materials</li><li>Operate labeling, printing, and scanning equipment to ensure accurate data capture</li><li>Verify label information, including part numbers, barcodes, dates, and regulatory markings</li><li>Ensure all labels meet company quality standards and applicable regulatory requirements</li><li>Perform routine quality checks and document results as required</li><li>Manage and track labeling materials and supplies to support inventory accuracy</li><li>Maintain organized records related to labeling, tracking, and compliance</li><li>Identify and report labeling errors or discrepancies promptly</li><li>Maintain a clean, organized, and safe work area</li><li>Follow all safety procedures and wear required personal protective equipment (PPE)</li><li>Perform additional duties as assigned by supervisors</li></ul><hr><h3>Required Skills &amp; Qualifications</h3><ul><li>Previous experience in labeling, production, manufacturing, or quality support preferred</li><li>Strong attention to detail and accuracy</li><li>Ability to read and follow work instructions, specifications, and regulatory requirements</li><li>Comfortable operating basic machinery, scanners, and computer systems</li><li>Basic computer skills for data entry and verification</li><li>Ability to work independently and as part of a team</li></ul><hr><h3>Physical &amp; Work Requirements</h3><ul><li>Ability to stand for extended periods</li><li>Ability to lift and move materials as required</li><li>Comfortable working in a fast-paced, repetitive production environment</li><li>Willingness to work overtime or weekends when needed</li></ul><hr><h3>Why Join Our Team?</h3>We offer a stable work environment with opportunities to grow within a well-established organization. Our competitive benefits package includes:<ul><li>Medical, dental, and vision insurance</li><li>Life and disability insurance</li><li>Paid time off</li><li>Tuition reimbursement</li><li>401(k) retirement plan</li><li>Opportunities for advancement</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Ruther Glen, VA.Pay and BenefitsThe pay range for this position is $18.00 - $23.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Ruther Glen,VA.Application DeadlineThis position is anticipated to close on Mar 2, 2026. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Labeling Technician

Learn more about free job search tools, learning opportunities, and exclusive member events.

Discover CareerCircle

Access resources to advance your job search and career growth.

Tools & Training

Explore a wide range of job opportunities that match your skills and career goals.

Search Jobs

Create a professional resume that captures the attention of top employers with our easy-to-use tool.

Resume Builder

Prepare for your next interview with our expert tips and strategies.

Interview Prep

Discover in-depth profiles of leading employers to find your ideal workplace.

Search Companies

Develop in-demand skills with curated courses for today’s job market.

Courses

Access career resources and job postings anytime, anywhere with our app.

Mobile App

Source skilled talent and build your team.

Talent Acquisition

Access skilled talent ready to excel via our AI-driven platform, virtual events, and recruitment services.

CareerCircle TalentConnect

Transform your workforce and hiring practices with essential training and continuing education.

InclusiveU

Broaden your talent pool with dedicated support for individuals with disabilities.

Getting Hired Powered by CareerCircle

Mission aligned solutions supporting Non-Profit Organizations, Educational Institutions, Local Workforce Development Boards, and Learning Providers.

Upskilling & Job Advocacy

Upskilling solutions designed to empower members with in-demand skills training and ongoing support for successful certificate completion.

CareerReady

Job advocacy solutions to connect job seekers to inclusive employers through dedicated recruiting support.

CareerAdvocacy

Learn how we connect all communities with careers and build skilled talent pipelines.

About CareerCircle

Discover answers to common questions and gain insights into our goals and services.

Reach out to us for inquiries, support, or to learn more about our mission and services.

Contact

Explore our blog for latest news and trends for job seekers and employers.

Blog

Access our virtual career fairs, job seeker workshops, and employer focused webinars.

Events

Discover valuable resources to enhance your hiring strategy and drive organizational success.

Employer Resources

Get the latest news and updates on our mission, partnerships, and community impact.

Aerotek Jobs

Browse Aerotek Jobs

JOB SEEKERS

EMPLOYERS

COMMUNITY PARTNERS

ABOUT

RESOURCES