Job Title: IronworkerJob DescriptionJoin our team as a Technician responsible for assembling and erecting pre-engineered metal buildings according to blueprints and specifications. This role involves installing metal siding, roofing panels, insulation, doors, and using hand and power tools to cut, shape, and fasten metal components.Responsibilities<ul><li>Assemble and erect pre-engineered metal buildings according to blueprints and specifications.</li><li>Install metal siding, roofing panels, insulation, and doors using hand and power tools.</li><li>Inspect and repair damaged structural components.</li><li>Ensure all work meets quality standards and complies with safety regulations.</li><li>Operate forklifts, cranes, and other heavy equipment as needed.</li><li>Collaborate with team members and supervisors to complete projects on time.</li><li>Maintain a clean and organized worksite.</li></ul>Essential Skills<ul><li>3-5 years' experience in pre-engineered metal building or ironworking.</li><li>Ability to wear a tool belt and use tools such as a spud wrench and bullpens.</li><li>Ability to read and interpret construction drawings and blueprints.</li><li>Proficient in the use of construction tools and equipment.</li><li>Strong understanding of OSHA safety standards.</li><li>Physical stamina and ability to work at heights and in various weather conditions.</li></ul>Additional Skills &amp; Qualifications<ul><li>Valid driver’s license preferred.</li><li>Ability to hang iron, throw sheets/roofing, and perform general carpentry/concrete.</li><li>Experience in any skilled construction trade or equipment operating.</li></ul>Why Work Here?Enjoy 8 paid holidays, bereavement leave, vacation accrual, great benefits, and insurance.Work EnvironmentWork in commercial buildings including churches, banks, manufacturing centers, and trucking terminals. Expect to work in a variety of environments and weather conditions, maintaining a safe and organized workspace.Job Type &amp; LocationThis is a Contract position based out of Saint Joseph, MO.Pay and BenefitsThe pay range for this position is $23.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Saint Joseph,MO.Application DeadlineThis position is anticipated to close on Dec 23, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

public

Technician

Job Title: TechnicianJob DescriptionWe are seeking a dedicated Technician to service aircraft galley systems and related products onsite at an aircraft manufacturing factory. As part of a small team, you will represent our company, providing support for maintenance, repair, and troubleshooting issues identified by the customer. You will work closely with the customer to repair and find solutions.Responsibilities<ul><li>Utilize hand tools and schematics to perform tasks.</li><li>Coordinate with partners and managers to develop and implement solutions.</li><li>Troubleshoot mechanical and electrical systems effectively.</li><li>Repair metal and plastic panels, wiring, and mechanical components.</li><li>Use both hand tools and power tools for various tasks.</li></ul>Essential Skills<ul><li>Proficiency in repair, electrical, and mechanical systems.</li><li>Strong troubleshooting and assembly skills.</li><li>Experience with service, hand tools, blueprints, and installations.</li><li>Familiarity with aircraft, aviation, and Boeing systems.</li></ul>Additional Skills &amp; Qualifications<ul><li>At least 1 year of experience in building or repairing electromechanical products or related schooling in an Aviation or Aerospace environment.</li><li>Experience using computers for work orders, notes, and progress updates.</li><li>Eligibility for a Boeing badge.</li><li>Effective communication and presentation skills.</li><li>Preferred experience in aircraft/aviation and electrical theory and repair.</li></ul>Why Work Here?This position offers a great opportunity to learn and grow within the aviation industry while working for an industry leader in aircraft systems. The swing shift schedule helps avoid peak commute traffic.Work EnvironmentThe work schedule is Monday-Friday with a day shift for the first 2-3 months (0630 - 1530), transitioning to a long-term schedule of either the same day shift or 2pm - 10pm Monday-Friday, with rotating on-call coverage every third weekend. As part of a small team of four, you will be fully integrated into the factory environment. Occasionally, you may need to travel to other locations for day projects. This role requires adaptability to accommodate the client’s schedule and requests, which may sometimes seem unconventional. Downtime is possible due to the aircraft production schedule, and early departures may be possible once tasks are completed.Job Type &amp; LocationThis is a Contract position based out of Seattle, WA.Pay and BenefitsThe pay range for this position is $28.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Seattle,WA.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h1>Job Title: Millwright</h1>Monday - Friday, 40 hour weeks with available OT; Pay: $30/hr., will pay more based on welding/construction/millwright experience Join our team as a Technician, where you will play a vital role in assembling farming conveyor systems in the field. This position offers the opportunity to learn and grow in a dynamic environment, with hands-on tasks such as cleaning up job sites, gathering materials and tools, cutting steel using a plasma cutter or grading saw, welding, and reading blueprints.Responsibilities<ul><li>Clean up job sites and ensure a tidy workspace.</li><li>Gather necessary materials and tools for various tasks.</li><li>Learn to cut steel using a plasma cutter and grading saw.</li><li>Develop welding skills.</li><li>Learn to read and interpret blueprints.</li><li>Accurately measure and cut steel.</li><li>Assemble farming conveyor systems in the field.</li></ul>Essential Skills<ul><li>Experience with hand tools.</li><li>Proficiency in using a tape measure.</li><li>Experience in welding, conveyor assembly, and mechanical assembly.</li><li>History of working outdoors.</li></ul>Additional Skills &amp; Qualifications<ul><li>Mechanical assembly skills are preferred and helpful.</li><li>Strong attendance and punctuality are important.</li><li>Career-minded and hardworking individuals will excel.</li><li>Ability to read a tape measure and eagerness to learn measuring and cutting steel.</li></ul>Work EnvironmentThe work environment involves traveling within a one-hour radius around Ohio, with the potential for overnight stays in hotels up to 10% of the time. Depending on the workload, 70%-90% of the work is conducted outdoors. Be open to travel for 1-3 weeks at a time.Job Type &amp; LocationThis is a Contract to Hire position based out of Mc Comb, OH.Pay and BenefitsThe pay range for this position is $20.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a hybrid position in Mc Comb,OH.Application DeadlineThis position is anticipated to close on Dec 13, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Steel Erector Technician/Iron WorkerJob DescriptionThe primary role of the Steel Erector Technician is to install steel beams, girders, and columns to create frames for sheet metal roofing structures. This role involves groundwork, steel framing installation, and preparation for roofing.Responsibilities<ul><li>Install steel beams, girders, and columns to create structural frames.</li><li>Conduct groundwork, steel framing installation, and preparation for roofing.</li><li>Work with sheet metal and pre-engineered steel buildings.</li><li>Operate equipment such as boom lifts and scissor lifts.</li><li>Handle welding and sheet metal assembly tasks.</li></ul>Essential Skills<ul><li>Experience in sheet metal installation and steel erection.</li><li>Proficiency in working with pre-engineered metal buildings.</li><li>Knowledge of operating boom lifts, scissor lifts, and construction fork lifts.</li><li>2+ years of relevant experience.</li></ul>Additional Skills &amp; Qualifications<ul><li>OSHA 10 certification is required.</li><li>Certifications for boom lift, scissor lift, and construction fork lift are a plus.</li></ul>Why Work Here?This company offers a relaxed, hands-off environment where field laborers go directly to the site each day. Enjoy quarterly company-wide events and twice-monthly employee surveys to address any concerns quickly. Benefit from competitive pay and a healthcare package covering 50% of costs.Work EnvironmentThe position involves typical day shifts with opportunities for overtime on certain projects.Job Type &amp; LocationThis is a Contract to Hire position based out of Lees Summit, MO.Pay and BenefitsThe pay range for this position is $25.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Lees Summit,MO.Application DeadlineThis position is anticipated to close on Dec 23, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h2>Data Center Technician</h2>Pay: $25/hourLocation: Warrenton, VAJob Type: Full time<h2>Job Description</h2>We are seeking technicians to replace water supply and return hoses in our server racks with new 6mm hoses. Hoses will be of PEX pipe material, so being familiar with basic plumbing procedures to cut and install PEX pipe are required. The role is at a data center currently in Warrenton, VA, and the current schedule is Monday - Friday from 7am - 3pm.<h2>Responsibilities</h2><ul><li>Replace water supply and return hoses for data center racking systems (storage systems of data and IT infrastructure).</li><li>System shutdown and restart.</li><li>Coordinate with the IT team to ensure server systems are safely powered down or paused before beginning work.</li><li>Perform thorough leak testing of all new hose connections to verify that no water leaks occur.</li><li>The PEX pipe are the water hoses that cool down the racking systems in the data center.</li></ul><h2>Essential Skills</h2><ul><li>Experience in plumbing, electrical, construction, and repair.</li><li>Ability to perform heavy lifting as required.</li></ul>We are actively screening qualified applicants who are interested in this role to start the first week after Christmas. Pay ranges from $25-$28/hour depending on work experience. If you are laid off, or anticipating a layoff, apply below today!Job Type &amp; LocationThis is a Contract position based out of Warrenton, VA.Pay and BenefitsThe pay range for this position is $28.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Warrenton,VA.Application DeadlineThis position is anticipated to close on Dec 25, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Concrete Finisher Job DescriptionThe Concrete Finisher will be responsible for preparing, finishing, and curing concrete surfaces to meet project specifications and quality standards. This role involves collaborating closely with other construction professionals to ensure the successful completion of projects.Responsibilities<ul><li>Prepare concrete surfaces for finishing by using appropriate hand and power tools.</li><li>Finish and cure concrete surfaces to meet project specifications and quality standards.</li><li>Collaborate with construction teams to ensure successful project completion.</li><li>Utilize grinders, polishers, and sanding equipment for surface preparation and finishing.</li><li>Interpret and work from blueprints to execute project plans accurately.</li><li>Ensure all work complies with safety regulations and standards, including OSHA 10 requirements.</li></ul>Essential Skills<ul><li>Proficiency in concrete finishing techniques.</li><li>Experience using hand tools and power tools for construction.</li><li>Ability to read and interpret blueprints.</li><li>Familiarity with commercial construction practices.</li><li>Valid driver's license.</li></ul>Additional Skills &amp; Qualifications<ul><li>OSHA 10 certification is required.</li><li>Experience in formwork and sanding is advantageous.</li></ul>Why Work Here?Join a team that offers consistent, year-round work with opportunities for professional growth in a supportive environment.Work EnvironmentConcrete finishers often work outdoors on construction sites, exposed to varying weather conditions such as heat, cold, rain, or wind.Job Type &amp; LocationThis is a Contract position based out of Shawnee, KS.Pay and BenefitsThe pay range for this position is $26.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Shawnee,KS.Application DeadlineThis position is anticipated to close on Dec 15, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Data Center Structured Cabling Technician Job DescriptionThe Data Center Structured Cabling Technician is responsible for the installation, maintenance, testing, and labeling of fiber optic and copper cabling infrastructure within a mission-critical data center environment. This role ensures all physical layer connectivity meets industry standards for performance, reliability, safety, and proper documentation.Responsibilities<ul><li>Run, pull, install, and terminate various types of copper (Cat5e, Cat6, Cat6a) and fiber optic (single-mode and multimode) cables in trays and conduits.</li><li>Install support structures, including racks, cabinets, patch panels, and cable management systems (ladder racks, j-hooks, fiber guide).</li><li>Perform fiber and copper patching between network equipment and servers according to design specifications and work orders.</li><li>Conduct comprehensive testing and certification of all installed cabling using industry-standard equipment to diagnose and resolve faults, signal loss, and connection issues.</li><li>Apply clear, permanent labels to all cables, ports, and panels at both ends, adhering strictly to ANSI/TIA-606 or client-specific labeling standards.</li><li>Adhere to all safety protocols and industry best practices to ensure high-quality workmanship and a safe work environment.</li><li>Maintain accurate inventory records of all cabling, optics, and related materials and tools.</li><li>Coordinate with network engineers, IT staff, and other trades to facilitate new installations, upgrades, and maintenance activities.</li></ul>Essential Skills<ul><li>Strong understanding of structured cabling systems and industry standards (TIA/EIA-568, ANSI/TIA-942, BICSI practices).</li><li>Proficiency in fiber optic handling, inspection, cleaning, and termination/splicing techniques (LC, SC, MTP connectors).</li><li>Expertise in using various testing equipment for both copper and fiber cabling.</li><li>Ability to lift and move up to 50 pounds regularly, work at heights from ladders, and work in tight or confined spaces.</li><li>Minimum 2-3 years of experience in low voltage cabling installation, preferably within a data center or commercial environment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Troubleshooting skills.</li><li>Experience with installation and construction.</li><li>Knowledge of access control, rack and stack, cable tray, cable installation, cable assembly.</li><li>OSHA 10 and OSHA 30 certifications.</li><li>Blueprint reading skills.</li></ul>Why Work Here?Enjoy comprehensive health and hospitalization plans, 401 K retirement plan eligibility, profit sharing after one year, and paid vacation days. Benefit from paid holidays and prorated personal time off days in your first year. Experience a supportive work environment with opportunities for professional growth.Work EnvironmentThe role is based in a data center environment with working hours from Monday to Friday, 7 am to 3 pm. Be prepared for occasional night shifts and overtime opportunities as needed.Job Type &amp; LocationThis is a Contract to Hire position based out of Manassas, VA.Pay and BenefitsThe pay range for this position is $25.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Manassas,VA.Application DeadlineThis position is anticipated to close on Dec 17, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TechnicianJob DescriptionWe are seeking a dedicated Technician who will initially begin as a route delivery helper to become familiar with our customers, stops, locations, and equipment. The role primarily involves delivering and unloading 50lb bags of softener salt, approximately 250 bags a day. You may use a dolly in some cases, but often you will be required to carry bags by hand, including loading and unloading.Responsibilities<ul><li>Deliver and unload 50lb bags of softener salt to various locations.</li><li>Familiarize yourself with customer routes and equipment.</li><li>Utilize a dolly or carry bags by hand as needed.</li><li>Load and unload bags by hand efficiently.</li></ul>Essential Skills<ul><li>General labor experience.</li><li>Clean driving record.</li><li>Ability to lift 50 lbs up to 250 times a day.</li><li>Strong customer service skills to greet clients at their sites.</li><li>Driving and unloading experience.</li></ul>Additional Skills &amp; Qualifications<ul><li>Kind personality to interact positively with customers.</li></ul>Why Work Here?This is a great place to work with competitive pay and comprehensive benefits. Employees receive 100% paid healthcare for themselves and their dependents after six months, along with a $4,000 healthcare allowance. We offer a 401k match and frequently provide paid lunches, ensuring a supportive and rewarding work environment.Work EnvironmentThe work environment involves unloading salt at various locations such as apartment buildings, colleges, commercial workplaces, and offices. This role requires physical strength and stamina, and you will often work independently or as part of a small team.Job Type &amp; LocationThis is a Contract to Hire position based out of Cold Spring, MN.Pay and BenefitsThe pay range for this position is $25.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Cold Spring,MN.Application DeadlineThis position is anticipated to close on Dec 22, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TechnicianJob DescriptionYou will be responsible for the installation and maintenance of systems including Voice and Data, Fiber Optics, DAS (Distributed Antenna Systems), Security, Access Control, Wireless Systems, and Nurse Call.Responsibilities<ul><li>Install low-voltage cabling for systems such as voice, data, security, paging, and nurse-call.</li><li>Perform fiber splicing and termination.</li><li>Terminate cable according to color codes.</li><li>Test for polarity, connectivity, and install racks and patch panels.</li><li>Set up computer rooms.</li><li>Process paperwork accurately and in a timely manner.</li><li>Maintain compliance with company and OSHA safety standards.</li><li>Analyze blueprints for job site knowledge.</li><li>Anticipate equipment, procedures, and training needs for upcoming tasks.</li><li>Complete job layouts for projects of limited scope and size.</li><li>Lead small crews when necessary.</li><li>Enforce a safe job site and maintain compliance with safety standards.</li><li>Install and terminate peripheral devices.</li></ul>If interested, please apply immediately or contact Logan at 920 716 3271 as positions are limited!Job Type &amp; LocationThis is a Contract to Hire position based out of Menasha, WI.Pay and BenefitsThe pay range for this position is $20.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Menasha,WI.Application DeadlineThis position is anticipated to close on Dec 19, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Data Center TechnicianJob DescriptionJoin our dynamic team as a Data Center Technician in Leesburg, Virginia, where you will play a crucial role in maintaining and enhancing our facility's hardware and network infrastructure. This position follows standard Monday to Friday business hours (7am-4pm).Responsibilities<ul><li>Assist in the installation and removal of customer hardware, including servers, routers, power supplies, and related equipment.</li><li>Support the setup, labeling, and documentation of racks, structured cabling, and fiber pathways.</li><li>Participate in the installation, termination, and testing of Cat6 copper and multi-strand fiber optic cabling while adhering to best installation practices and quality standards.</li><li>Assist with rack and stack activities, overhead pathways, and migrations within the data center.</li><li>Perform basic hardware upgrades and assist in installing or updating device operating systems for standard equipment.</li><li>Support troubleshooting activities for hardware, cabling, and basic network issues using ITIL best practices.</li><li>Identify and communicate system faults or potential hazards to technicians or supervisors.</li><li>Assist with maintaining accurate service records, documentation, and asset labeling.</li><li>Operate hand tools, power tools, and telecommunications testing equipment safely and effectively.</li></ul>Essential Skills<ul><li>Experience in installation, maintenance, and decommissioning of data center hardware.</li><li>Proficiency in handling copper and fiber optic cabling, including pulling cable, termination testing, patch panel, fiber polishing, and fusion splicing.</li><li>Knowledge of routers, switches, and rack and stack processes.</li><li>Strong communication, teamwork, and time management skills.</li><li>Basic understanding of data center systems, including servers, SANs, and network technologies.</li><li>Foundational knowledge of structured cabling systems, including copper and fiber media.</li><li>Ability to read and interpret basic technical drawings, floor plans, and schematics.</li><li>Working knowledge of Microsoft Office Suite and other productivity tools.</li></ul>Additional Skills &amp; Qualifications<ul><li>Previous data center experience preferred </li><li>Maintain professionalism with clients, vendors, and colleagues to ensure positive working relationships and high customer satisfaction.</li><li>Follow company safety policies and procedures at all times.</li><li>Operate company or personal vehicles safely in accordance with local laws and safety standards.</li><li>Participate in maintaining a safe and organized work environment by reporting hazards or risks promptly.</li></ul>Why Work Here?Enjoy a comprehensive benefits package designed to support your health, well-being, and professional growth. Benefit from medical, dental, and vision insurance, a 401(k) retirement plan with company match, employer-paid life insurance, and paid time off including holidays and volunteer time. Take advantage of tuition reimbursement, tool and boot reimbursement, and paid parental leave.Work EnvironmentThis role operates primarily in data center and field environments. Work may occur during nonstandard hours, including nights, weekends, and holidays, based on customer needs. Standard personal protective equipment (PPE) must be worn as required, with composite boots provided.Job Type &amp; LocationThis is a Contract position based out of Leesburg, VA.Pay and BenefitsThe pay range for this position is $28.00 - $40.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Leesburg,VA.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h2>Job Title: Year-Round Furniture Installer Needed</h2>﻿Job DescriptionJoin our dedicated team to assemble and install furniture for new local businesses. You will work both in the field and the warehouse, ensuring high-quality furniture service and relocation duties, including delivery, assembly, moving, debris removal, and repairs. This role requires collaboration with the Lead Installer or Project Manager.Responsibilities<ul><li>Complete furniture assembly/installation according to specifications to meet customer fulfillment.</li><li>Inspect furniture for proper setup following manufacturer’s guidelines.</li><li>Communicate effectively with clients, crews, and employees of supported organizations.</li><li>Load and unload furniture onto trucks as necessary.</li><li>Adhere to all safety procedures during job duties.</li></ul>Essential Skills<ul><li>Experience with hand tools and moving furniture.</li><li>Ability to work in a fast-paced environment.</li><li>Proficiency in using tools such as a cordless drill, tape measure, level, and box cutter.</li><li>Ability to lift 50lbs repeatedly.</li><li>1 year of experience with assembling, moving, or installing furniture.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in construction trades is a plus.</li><li>Mechanically inclined individuals are considered.</li><li>1 year of working in a furniture warehouse or with a moving company.</li><li>Knowledge in installation, building material, construction, troubleshooting, repair, and building systems.</li></ul>Why Work Here?We offer opportunities for growth and advancement, with internal employees having advanced to higher pay scales. Be part of a supportive team that values dedication and skill development.Work EnvironmentWork within a small, competitive team where growth is encouraged. The role involves working both in the field and in the warehouse, providing a dynamic and engaging work experience.<h2>Job Type &amp; Location</h2>This is a Permanent position based out of La Crosse, WI.<h2>Pay and Benefits</h2>The pay range for this position is $16.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)<h2>Workplace Type</h2>This is a fully onsite position in La Crosse,WI.<h2>Application Deadline</h2>This position is anticipated to close on Dec 17, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h3>Description:</h3>If you're looking for a job ASAP and you have Concrete Installation experience, then this is the position for you!A well-established construction company in the Tampa area is looking for Concrete Installers to join the team and work on projects involving rebar tying, concrete forming, and installation. The company is hiring immediately, so Aerotek will provide a rapid interview process to get you started as soon as possible!<hr><h3>Responsibilities:</h3><ul><li>Tie rebar and prepare reinforcement for concrete structures.</li><li>Perform concrete forming and installation tasks.</li><li>Operate hand and power tools safely and efficiently.</li><li>Work on various commercial and residential projects.</li></ul><hr><h3>Essential Skills:</h3><ul><li>Experience with concrete forming and installation.</li><li>Ability to tie rebar and read basic plans.</li><li>Skilled in using hand tools and power tools.</li><li>Strong work ethic and ability to handle physical labor.</li></ul><hr><h3>Experience Level:</h3>Entry to experienced level<hr><h3>Location:</h3>Tampa, FL<hr><h3>Pay / Shift:</h3>$20–$25/hr depending on experienceSchedule: Monday–Friday and some Saturdays, 7:00 AM – 4:00/5:00 PMPlenty of overtime available!<hr>Apply right now and expect a call/text from Justin with Aerotek 😊. Positions with this company will be filled quickly!For quicker response email your resume to jholliday @aerotek.comJob Type &amp; LocationThis is a Contract position based out of St. Petersburg, FL.Pay and BenefitsThe pay range for this position is $20.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in St. Petersburg,FL.Application DeadlineThis position is anticipated to close on Dec 19, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TechnicianJob DescriptionThis position is akin to a shop helper role, entailing a variety of tasks such as operating CNC Routers or Zund machines, assembling displays and signs, cutting signs, taping boxes, building pallets, and gluing signs together. The company specializes in creating interior displays and signs for clients across Minnesota and the country, including high-profile entities such as the Minnesota Vikings Training Center and the Mall of America. The role requires adaptability and the ability to operate computer-controlled machines, as projects vary greatly based on customer requests.Responsibilities<ul><li>Operate CNC Router and Zund machines.</li><li>Assemble displays and signs.</li><li>Cut signs and tape boxes.</li><li>Build pallets and glue signs together.</li><li>Wrap vehicles with vinyl/graphics.</li><li>Install graphics on walls and create event displays.</li><li>Collaborate with the team to solve problems and execute projects.</li></ul>Essential Skills<ul><li>Proficiency with hand tools and power tools.</li><li>Ability to troubleshoot and solve problems.</li><li>Experience with assembly and fabrication.</li><li>Understanding of blueprints and mechanical systems.</li><li>General labor skills and a strong mechanical aptitude.</li></ul>Additional Skills &amp; Qualifications<ul><li>Familiarity with CNC Routing machines.</li><li>Experience in the interior signage industry is a plus.</li><li>Ability to use tools such as levels, screwdrivers, drills, and hammers.</li><li>Experience with graphic installation on walls and vehicles.</li></ul>Why Work Here?Enjoy a positive, family-like company culture that supports career advancement through tuition assistance. Benefit from a comprehensive package that includes full benefits and a 401k plan. Participate in company lunches, happy hours, and an annual golf outing. Experience a supportive work environment where team collaboration is encouraged, and listen to music while you work.Job Type &amp; LocationThis is a Permanent position based out of Saint Paul, MN.Pay and BenefitsThe pay range for this position is $52000.00 - $72800.00/yr.- Positive family feel company culture - Will assist with paying for tuition if advancing their career with the company - Full benefits offered as well as 401k - Do company lunches 2-3 times a month on Fridays - Company Happy Hours - They do a big Golf outing once a year - Able to listen to music while workingWorkplace TypeThis is a fully onsite position in Saint Paul,MN.Application DeadlineThis position is anticipated to close on Dec 15, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h1>Job Title: Technician</h1>Job DescriptionJoin our team as a Technician, where you will be responsible for the repair and service of large conveyors used primarily in aggregate manufacturing. This role offers a unique opportunity to learn and grow in a supportive environment, with flexibility in pay based on your experience level.Responsibilities<ul><li>Repair and service large conveyors used in aggregate manufacturing.</li><li>Utilize mechanical skills and hand tools for installation and maintenance.</li><li>Collaborate with team members to ensure timely completion of projects.</li><li>Travel as needed, primarily covering the territory from South Austin to the border.</li><li>Meet at the San Antonio shop and travel with another technician when required.</li></ul>Essential Skills<ul><li>Mechanical aptitude with hand and power tools.</li><li>Valid driver's license with a clean driving record.</li><li>Ability to travel as needed.</li><li>Mechanical tech experience in manufacturing.</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of San Antonio, TX.Pay and BenefitsThe pay range for this position is $20.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in San Antonio,TX.Application DeadlineThis position is anticipated to close on Dec 23, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Mechanic Shop URGENTLY Hiring Technician for trucks used by the city like snowplows, etc.. Job Title: Truck Upfitter / Wiring TechnicianLocation: Kenvil, NJShift: First ShiftPay: Up to $28 hour *based on experienceWe are seeking a skilled Wiring Technician with strong experience in electrical systems, particularly within the automotive industry. The ideal candidate will demonstrate mechanical aptitude and experience with wiring automotive components.<ul><li>The individual will be responsible for installing, servicing, troubleshooting in the process of completing electrical wiring for trucks.</li><li>Knowledge in 12V based automotive electrical systems</li><li>Automotive circuits</li><li>Lighting including emergency type lighting</li><li>Automotive relays</li><li>Fusing and amperage ratings</li><li>Wire gauge ratings</li><li>Wire harnesses</li><li>Voltage testing</li></ul>Requirements:<ul><li>Experience with electrical and wiring work.</li><li>Mechanical aptitude and ability to troubleshoot and repair equipment.</li><li>Attention to detail and ability to follow instructions accurately.</li><li>Read blueprints and schematics.</li><li>Read and write in English.</li></ul>APPLY NOW!Job Type &amp; LocationThis is a Contract position based out of Netcong, NJ.Pay and BenefitsThe pay range for this position is $22.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Netcong,NJ.Application DeadlineThis position is anticipated to close on Dec 17, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h3>Job Title: Manufacturing Technician</h3><hr><h4>Overview</h4>As a Manufacturing Technician, you will play a critical role in operating and maintaining refinery equipment to ensure smooth production processes. This position involves monitoring systems, performing quality checks, and handling chemicals safely while adhering to strict safety protocols. If you have strong mechanical aptitude, troubleshooting skills, and a commitment to quality, this is an excellent opportunity to join a growing team with great benefits and advancement potential.<hr><h4>Key Responsibilities</h4><ul><li>Operate refinery equipment and manage glycerin refinery plant operations using Distributed Control Systems (DCS).</li><li>Monitor process parameters, alarms, and equipment status; make necessary adjustments to maintain efficiency.</li><li>Perform quality control by collecting samples and delivering them to the lab for testing.</li><li>Safely handle chemicals, ensuring proper dosing and compliance with safety standards.</li><li>Conduct preventive maintenance on field equipment and report issues promptly.</li><li>Follow all plant safety procedures, especially when working with hazardous materials or high-temperature equipment.</li></ul><hr><h4>Must-Have Skills</h4><ul><li>Quality control expertise</li><li>Strong mechanical aptitude</li><li>Troubleshooting ability</li><li>Experience with mechanical and construction tasks</li></ul><hr><h4>Nice-to-Have Skills</h4><ul><li>Forklift operation</li><li>Production and inspection experience</li><li>Machine operating proficiency</li><li>Hand tool usage</li><li>Cleanroom experience</li></ul><hr><h4>Additional Requirements</h4><ul><li>Valid driver’s license</li><li>Computer proficiency</li><li>Comfortable working at heights</li><li>Ability to routinely lift up to 75 lbs</li></ul><hr><h4>Work Environment</h4><ul><li>Climate-controlled facility; work indoors and outdoors in all weather conditions</li><li>Exposure to chemicals, pressurized steam, dust, heat, noise, and fumes</li><li>Required PPE: steel-toed boots, hard hat, safety glasses (uniforms provided later)</li><li>Team size: ~10 production operators per shift</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Ames, IA.Pay and BenefitsThe pay range for this position is $22.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Ames,IA.Application DeadlineThis position is anticipated to close on Dec 15, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Data Center Structured Cabling Technician Job DescriptionThe Data Center Structured Cabling Technician is responsible for the installation, maintenance, testing, and labeling of fiber optic and copper cabling infrastructure within a mission-critical data center environment. This role ensures all physical layer connectivity meets industry standards for performance, reliability, safety, and proper documentation.Responsibilities<ul><li>Run, pull, install, and terminate various types of copper (Cat5e, Cat6, Cat6a) and fiber optic (single-mode and multimode) cables in trays and conduits.</li><li>Install support structures, including racks, cabinets, patch panels, and cable management systems (ladder racks, j-hooks, fiber guide).</li><li>Perform fiber and copper patching between network equipment and servers according to design specifications and work orders.</li><li>Conduct comprehensive testing and certification of all installed cabling using industry-standard equipment to diagnose and resolve faults, signal loss, and connection issues.</li><li>Apply clear, permanent labels to all cables, ports, and panels at both ends, adhering strictly to ANSI/TIA-606 or client-specific labeling standards.</li><li>Adhere to all safety protocols and industry best practices to ensure high-quality workmanship and a safe work environment.</li><li>Maintain accurate inventory records of all cabling, optics, and related materials and tools.</li><li>Coordinate with network engineers, IT staff, and other trades to facilitate new installations, upgrades, and maintenance activities.</li></ul>Essential Skills<ul><li>Strong understanding of structured cabling systems and industry standards (TIA/EIA-568, ANSI/TIA-942, BICSI practices).</li><li>Proficiency in fiber optic handling, inspection, cleaning, and termination/splicing techniques (LC, SC, MTP connectors).</li><li>Expertise in using various testing equipment for both copper and fiber cabling.</li><li>Ability to lift and move up to 50 pounds regularly, work at heights from ladders, and work in tight or confined spaces.</li><li>Minimum 2-3 years of experience in low voltage cabling installation, preferably within a data center or commercial environment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Troubleshooting skills.</li><li>Experience with installation and construction.</li><li>Knowledge of access control, rack and stack, cable tray, cable installation, cable assembly.</li><li>OSHA 10 and OSHA 30 certifications.</li><li>Blueprint reading skills.</li></ul>Why Work Here?Enjoy comprehensive health and hospitalization plans, 401 K retirement plan eligibility, profit sharing after one year, and paid vacation days. Benefit from paid holidays and prorated personal time off days in your first year. Experience a supportive work environment with opportunities for professional growth.Work EnvironmentThe role is based in a data center environment with working hours from Monday to Friday, 7 am to 3 pm. Be prepared for occasional night shifts and overtime opportunities as needed.Job Type &amp; LocationThis is a Contract to Hire position based out of Manassas, VA.Pay and BenefitsThe pay range for this position is $25.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Manassas,VA.Application DeadlineThis position is anticipated to close on Dec 18, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Technician Job DescriptionWe are seeking a dedicated and skilled maintenance technician to manage and maintain a 96-unit unoccupied complex. The role involves cleaning out vacant units and preparing them for new tenants through light carpentry, electrical work, plumbing, and cleaning tasks. Prior experience in a cleaning position within any environment is essential.Responsibilities<ul><li>Clean out vacant units in the 96-unit complex.</li><li>Perform light carpentry work to ensure units are ready for new tenants.</li><li>Conduct electrical repairs and maintenance as needed.</li><li>Handle plumbing tasks to ensure functional and safe living environments.</li><li>Maintain a clean and organized workspace.</li></ul>Essential Skills<ul><li>Proven experience in carpentry, electrical, and plumbing tasks.</li><li>Previous cleaning experience in any environment.</li><li>Ability to perform maintenance tasks efficiently and safely.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in property management is a plus.</li><li>Must be respectful, honest, and willing to work hard.</li><li>Good communication skills are essential.</li></ul>Why Work Here?Join a great company that truly values its employees, offering a stable and reliable work environment. Employees are treated fairly and can expect consistent work opportunities.Work EnvironmentWork hours are Monday to Friday, 8 AM to 5 PM. You will collaborate with the Maintenance Manager and another team member. The dress code requires work pants (khaki, black, or blue) and work boots, with the option to wear jeans on Fridays and black or royal blue polo shirts.Job Type &amp; LocationThis is a Contract to Hire position based out of Bridgeport, CT.Pay and BenefitsThe pay range for this position is $15.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bridgeport,CT.Application DeadlineThis position is anticipated to close on Dec 16, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Technician - Semiconductor Industry Job DescriptionWe are seeking multiple skilled Technicians to join our dynamic team. This role involves operating and maintaining various systems and equipment across multiple disciplines, including HVAC, piping, and instrumentation. The ideal candidate will have a strong commitment to safety and professionalism, with a keen eye for detail and a proactive approach to problem-solving.Responsibilities<ul><li>Operate equipment from both field and remote control rooms.</li><li>Perform breakdown and preventative maintenance.</li><li>Execute LOTO procedures and shutdown/startup protocols.</li><li>Commission heavy equipment and systems.</li><li>Work in elevated environments using fall protection and harnesses.</li><li>Communicate via 2-way radio across teams.</li><li>Conduct walkdowns and inspections of HVAC pipes and ducts.</li><li>Verify connections, torque marks, and pipe supports against P&amp;ID drawings.</li><li>Identify missing components such as check valves.</li><li>Install and maintain DX refrigeration systems, dampers, valves, and ductwork.</li><li>Collaborate with hybrid HVAC teams and engineering support.</li><li>Perform hands-on work with steam traps, strainers, and bag filters.</li><li>Conduct inspections and repairs using tools.</li><li>Walk loops and perform loop checks.</li><li>Work with low-voltage systems and various instrumentation types.</li><li>Read and interpret SOPs, schematics, and technical drawings.</li><li>Collaborate with contractors and GCs to bring equipment online.</li><li>Install, configure, and calibrate instrumentation systems such as pressure, temperature, flow, and level.</li><li>Perform preventive maintenance and corrective repairs on instrumentation and control equipment.</li><li>Diagnose faults using diagnostic tools and software and implement timely solutions.</li><li>Maintain accurate documentation of maintenance activities, calibrations, and repairs.</li><li>Collaborate with engineering, operations, and maintenance teams to optimize system performance.</li><li>Ensure compliance with safety standards, company policies, and regulatory requirements.</li></ul>Essential Skills<ul><li>Proficiency with diagnostic tools, calibration equipment, and control systems.</li><li>Strong understanding of electrical, pneumatic, and hydraulic systems.</li><li>Excellent communication skills to effectively share information with team members and supervisors.</li><li>Strong problem-solving abilities and a proactive approach to identifying and resolving issues.</li><li>Demonstrated teamwork and collaboration, with the ability to work well in diverse teams.</li><li>High level of attention to detail and commitment to quality and safety.</li><li>Adaptability and willingness to learn new technologies and procedures.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in trade in HVAC, Instrumentation, Piping, or Mechanical trade in a commercial environment.</li><li>Ability to climb stairs, work on roofs, and perform outdoor tasks for extended hours.</li><li>Certifications such as OSHA10, EPA 608, and relevant trade licenses preferred.</li></ul>Why Work Here?Enjoy long-term career growth with top-tier clients, competitive pay, and shift differentials. Work on cutting-edge infrastructure in a collaborative, safety-first culture with high ethical standards.Work EnvironmentWork in a large warehouse environment where in-warehouse transportation is provided. Be prepared to be on your feet most of the day in a setting that can be dirty.Job Type &amp; LocationThis is a Contract position based out of Taylor, Texas.Job Type &amp; LocationThis is a Contract position based out of Taylor, TX.Pay and BenefitsThe pay range for this position is $25.00 - $43.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Taylor,TX.Application DeadlineThis position is anticipated to close on Dec 16, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TechnicianJob DescriptionYou will be responsible for the installation and maintenance of systems including Voice and Data, Fiber Optics, DAS (Distributed Antenna Systems), Security, Access Control, Wireless Systems, and Nurse Call.Responsibilities<ul><li>Install low-voltage cabling for systems such as voice, data, security, paging, and nurse-call.</li><li>Perform fiber splicing and termination.</li><li>Terminate cable according to color codes.</li><li>Test for polarity, connectivity, and install racks and patch panels.</li><li>Set up computer rooms.</li><li>Process paperwork accurately and in a timely manner.</li><li>Maintain compliance with company and OSHA safety standards.</li><li>Analyze blueprints for job site knowledge.</li><li>Anticipate equipment, procedures, and training needs for upcoming tasks.</li><li>Complete job layouts for projects of limited scope and size.</li><li>Lead small crews when necessary.</li><li>Enforce a safe job site and maintain compliance with safety standards.</li><li>Install and terminate peripheral devices.</li></ul>If interested, please apply immediately or contact Matt at 920 636 4166 as positions are limited!Job Type &amp; LocationThis is a Permanent position based out of Menasha, WI.Pay and BenefitsThe pay range for this position is $20.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Menasha,WI.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

🚨 Techs Wanted! 🚨 Join our team as a Data Center Structured Cabling Technician 📍 Location: Throughout Northern VA/Loudon County. 💰 Competitive pay + benefits (health, 401k, profit sharing, PTO)🕒 Mon–Fri, 7 AM–3 PM (OT available 💵)What You’ll Do: 🔌 Run &amp; terminate copper/fiber cables🗄️ Install racks, patch panels &amp; cable systems💡 Keep mission-critical data centers connectedWhat You Need: ✅ Cabling &amp; fiber optic skills✅ OSHA 10/30 certified✅ Troubleshooting + installation know-howApply today &amp; grow your career in a mission-critical environment!Job Type &amp; LocationThis is a Contract to Hire position based out of Manassas, VA.Pay and BenefitsThe pay range for this position is $25.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Manassas,VA.Application DeadlineThis position is anticipated to close on Dec 22, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Technician - $25/hr., To $35/hr.,

<h2>Job Title: Material Handler (Telehandler Operator)</h2>Shift: 1stPay: $20-$22/hrLocation: Downtown Jacksonville (32206)Job DescriptionAs a Material Handler, you will operate a Genie Boom Lift or telehandler to manage rebar and rigging tasks. You will be responsible for tying rebar and assembling it into bundles for transport using the boom lift. This role requires you to start immediately and work efficiently in a manufacturing or rebar environment.Responsibilities<ul><li>Operate Genie Boom Lift or telehandler for material handling tasks.</li><li>Tie and rig rebar into bundles for transportation.</li><li>Work efficiently in a manufacturing or rebar environment.</li><li>Utilize overhead crane and reach truck operations.</li><li>Perform tasks related to welding, grinding, bending conduit, and deburring.</li></ul>Essential Skills<ul><li>Experience with labor, production, and material handling.</li><li>Ability to operate boom truck and Genie equipment.</li><li>Proficiency in welding and grinding.</li><li>Experience in overhead crane operations and rigging.</li><li>Skill in using a tape measure for precise measurements.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in a manufacturing or rebar environment preferred.</li><li>Ability to work in a hot and dirty environment.</li><li>Familiarity with bending conduit and machine operation.</li><li>Competency in deburring tasks.</li></ul>Why Work Here?Join a tight-knit team in a busy and dynamic environment. Expect a productive year with opportunities to develop your skills in a supportive setting.Work EnvironmentThis role is based in an industrial environment downtown at a rebar manufacturer. The work environment is hot and dirty, requiring jeans, steel-toed boots, and a t-shirt in the shop, while business casual attire is appropriate for the office. Safety glasses are mandatory in safety-sensitive areas, and the team is small, with only one person at the front desk along with the Operations Manager.Job Type &amp; LocationThis is a Contract to Hire position based out of Jacksonville, FL.Pay and BenefitsThe pay range for this position is $20.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Jacksonville,FL.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Telehandler Operator

Job Title: Temporary Facilities CoordinatorJob DescriptionAs a Facilities Coordinator, you will provide comprehensive facility management services, ensuring the continuous monitoring and upkeep of office facilities. You will address client inquiries and concerns promptly, ensuring high-quality service delivery and resolution of any issues that arise. Your role is integral in maintaining operational excellence and client satisfaction.Responsibilities<ul><li>Provide general facility management and continuously monitor office facilities.</li><li>Address client inquiries and ensure timely and quality issue resolution.</li><li>Follow up with clients to ensure satisfaction.</li><li>Respond to facility inquiries and complaints, assess problems, and take corrective action.</li><li>Stay informed about all operational aspects of building systems.</li><li>Coordinate with outside contractors for service and repairs of equipment.</li><li>Follow protocols for effective building-specific maintenance and safety procedures.</li><li>Maintain ongoing communication with contractors, clients, and team members.</li><li>Assist with site inspections within the assigned building portfolio.</li><li>Create work orders and assign them to engineering staff, subcontractors, and vendors.</li><li>Report on open and closed work orders and check their status with the assigned party.</li><li>Request, review, and submit work orders, bids, and proposals from vendors.</li><li>Verify final invoice pricing and process payments promptly.</li><li>Assist in monitoring and assessing vendor performance.</li><li>Train vendors on work order and billing procedures.</li><li>Manage complex work orders such as environmental issues and disaster recovery.</li><li>Manage service and performance of vendors and landlords for timely job completion.</li><li>Create and record appropriate written communication between all parties.</li><li>Schedule and document maintenance and repairs on building equipment.</li><li>Communicate frequently with clients, landlords, and vendors to resolve issues and provide project status updates.</li><li>Provide process and procedures training and direction to new associates.</li><li>Coordinate special events in support of clients.</li><li>Assist with measuring and reporting key performance indicators against service level agreements.</li><li>Provide facilities helpdesk services and monitor workflow for all facilities cases to ensure consistent quality of service.</li></ul>Essential Skills<ul><li>Proficiency in Microsoft Office.</li><li>Experience with work orders and data entry.</li><li>Strong customer service skills.</li><li>Knowledge of facility management.</li></ul>Additional Skills &amp; Qualifications<ul><li>A minimum of 1 year of experience in an administrative, accounting, or tenant services capacity.</li><li>Experience with data entry, expansive reporting, filing, answering phones, scheduling, and communications.</li><li>Previous customer service experience.</li><li>Prior experience in facilities/property management, commercial real estate, or professional services industries preferred.</li></ul>Why Work Here?Join a dynamic team where your contributions are valued, and enjoy a role that offers the opportunity to enhance your skills in facility management. We provide a supportive environment that encourages professional growth and development.Work EnvironmentThe position is a temporary role with working hours from 9 AM to 5:30 PM. The current coordinator is going on maternity leave in January for approximately three months. The work involves a mix of office and on-site facility management tasks, requiring interaction with clients, contractors, and vendors. The role demands professionalism and effective communication skills in a fast-paced environment.Job Type &amp; LocationThis is a Contract position based out of Richmond, VA.Pay and BenefitsThe pay range for this position is $30.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Richmond,VA.Application DeadlineThis position is anticipated to close on Dec 15, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Temporary Facilities Coordinator

**Terminal Operator/Warehouse Associate - WEEKLY PAY - Start ASAP!**Location: SIoux Falls, SDPay: $17 - $18.50Hours: 7AM - 3:30PM Monday thru FridayWe are looking for a skilled Terminal Operator to join our team! You will be responsible for the safe and efficient operation of forklifts to move, locate, relocate, stack and count merchandise.Responsibilities:<ul><li>Primary duty will be bundling and folding boxes.</li><li>Pick custom orders for a variety of different clients.</li><li>Operate a sit down and stand up forklifts.</li><li>Loading trucks to ensure trucks are going out on time.</li><li>Have strong attention to detail to make sure orders are picked correctly, labeled correctly, and stacked up in truck correctly.</li><li>There is a lot of matching numbers from pallets in warehouse to pick sheets - again STRONG attention to detail.</li></ul>Skills:<ul><li>2 years of inventory control experience</li><li>Self motivated</li><li>Strong attention to detail</li><li>Great attendance</li></ul>APPLY NOW!!!Job Type &amp; LocationThis is a Contract to Hire position based out of Sioux Falls, SD.Pay and BenefitsThe pay range for this position is $17.00 - $18.50/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Sioux Falls,SD.Application DeadlineThis position is anticipated to close on Dec 22, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Terminal Operator

Job Title: Test SupervisorJob DescriptionThe Test &amp; Burn-in Department Supervisor is responsible for overseeing all testing operations for our products, including the management of the electronics testing department's 'Burn-in Room'. This role ensures that all electronic assemblies, sub-systems, and finished products meet stringent quality and performance standards before shipment. You will lead a team of test technicians, manage workflow, maintain calibration compliance, and drive continuous improvement in testing processes. A hands-on leadership approach, strong cross-functional coordination, and a quality-first mindset are essential to meet the growing demands of our public safety, traffic, industrial, and OEM customers.Responsibilities<ul><li>Supervise, train, and coach test technicians to meet performance standards and development goals.</li><li>Coordinate daily workload and resource allocation to align with production and engineering priorities.</li><li>Cultivate a culture of ownership, safety, quality, and continuous improvement in the test department.</li><li>Oversee execution of test procedures across product lines, including LED lightbars, sirens, traffic control systems, and custom assemblies.</li><li>Manage the Burn-in Room for extended stress testing, thermal cycling, and reliability screening of finished goods.</li><li>Validate test methods and maintain test documentation, including work instructions and failure analysis reports (FARs).</li><li>Collaborate with engineering on troubleshooting test failures, root cause analysis, and corrective actions.</li><li>Support the design, build, and upkeep of automated and manual test fixtures and burn-in racks.</li><li>Ensure calibration of all test and measurement equipment in compliance with internal Quality Management System (QMS) and maintain calibration logs, certificates, and test data for audit readiness and traceability.</li><li>Drive adherence to Quality Management System (QMS) and safety procedures.</li><li>Identify testing inefficiencies, quality escapes, or rework loops and lead resolution initiatives.</li><li>Partner with production and engineering to improve throughput and reduce test cycle times.</li><li>Provide input on Engineering Change Notices (ECNs) and Requests (ECRs) impacting test processes, including New Product Introduction (NPI) readiness.</li><li>Maintain accurate records of test results, department KPIs, failure trends, and calibration status.</li><li>Report on departmental performance to operations leadership, highlighting opportunities and risks.</li><li>Lead RMA/failure analysis in collaboration with service, customer support, and engineering teams.</li></ul>Essential Skills<ul><li>Strong understanding of electrical component testing and procedures.</li><li>Ability to solder through hold and surface mount.</li><li>Strong leadership ability for a small team.</li><li>Excellent communication, coaching, and development skills.</li><li>Troubleshooting and electrical engineering knowledge.</li><li>Experience in electronics testing or manufacturing (3–5 years).</li><li>Leadership or supervisory experience (2+ years).</li><li>Strong understanding of electronic circuits, LED systems, and test methodologies.</li><li>Familiarity with calibration standards and test equipment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Associate or Bachelor's degree in Electronics, Electrical Engineering Technology, or equivalent experience.</li><li>Experience in emergency vehicle lighting, industrial signaling, or traffic safety systems is preferred.</li><li>Experience in ISO 9001-certified, high-mix/low-volume electronic products manufacturing environments is advantageous.</li></ul>Why Work Here?We offer a competitive benefits package that includes Medical, Dental, and Vision insurance with discounted rates available after 30 days. Choose from three different medical plans and enjoy a 401K and/or 401K Roth option after 30 days. Additionally, you'll receive 56 hours of Personal Time Off (PTO) after your first year and 96 hours after five years, along with up to 40 hours of Paid Sick Time accrued per state requirements. Celebrate your birthday off after five years of service and enjoy 11 company holidays. We provide a small life insurance policy, a long-term disability plan, and additional options for life insurance, transit passes, and more.Work EnvironmentWork in an air-conditioned manufacturing facility with calm and clean surroundings. Our company manufactures and assembles flashing LED lights for first responder vehicles, construction vehicles, farming equipment, and more.Job Type &amp; LocationThis is a Contract to Hire position based out of Gilbert, AZ.Pay and BenefitsThe pay range for this position is $22.84 - $35.10/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Gilbert,AZ.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Test Supervisor

Job Title: Test Technician - DIRECT HIRE Pay: $25-30/hr Hours: 7am-3:30pmJob DescriptionThe Test Technician will be responsible for testing, troubleshooting, and documenting wiring and functional issues according to wiring diagrams and test procedures. The role involves testing prototype models as per engineering instructions, interfacing with production and engineering personnel to address nonconformance issues, and programming PLCs for load step applications. The technician will also set up electronic components, develop test simulations, assist in training new testers, and perform final inspections to ensure quality and safety.Responsibilities<ul><li>Test, troubleshoot, correct, and document wiring and functional problems as per wiring diagrams and test procedures.</li><li>Test prototype models based on engineering instructions and knowledge of electronic systems.</li><li>Collaborate with production and engineering personnel to record and rectify physical and design nonconformance issues.</li><li>Program and test PLCs for load step applications.</li><li>Set up electronic components and protective circuits according to test specifications.</li><li>Develop and build test simulations for engineering.</li><li>Assist in training new testers in test techniques, equipment set-up, and operation.</li><li>Perform final inspections on all tested units.</li><li>Promote a safe work environment.</li><li>Perform additional duties as assigned by the supervisor.</li></ul>Essential Skills<ul><li>Ability to read and follow schematics of complex electrical and mechanical circuits.</li><li>Proficiency in troubleshooting, electronics, electrical, and mechanical systems.</li><li>Experience with calibration, multimeters, and testing equipment.</li><li>Knowledge of 480 Volt systems, PLCs, circuits, and hand tools.</li><li>Inspection and electro-mechanical skills.</li></ul>Additional Skills &amp; Qualifications<ul><li>2 years of Electronics and Electrical experience.</li><li>Knowledge of electrical principles and power management.</li><li>Familiarity with LO/TO and OSHA electrical safety.</li><li>Knowledge of PLC interface, computer programming, and networking skills.</li></ul>Job Type &amp; LocationThis is a Permanent position based out of Bedford, OH.Pay and BenefitsThe pay range for this position is $54080.00 - $54080.00/yr.• Diverse- fast pace training environment • Will be trained to work on their own and trusted with little supervision • Summit picnics and lunches • 401K- dollar per dollar match on 6% • Family oriented company • Growth is highly encouraged and tuition reimbursement is an option for all employeesWorkplace TypeThis is a fully onsite position in Bedford,OH.Application DeadlineThis position is anticipated to close on Dec 15, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Test Technician

Job Title: Test TechnicianJob DescriptionThe Test Technician conducts a variety of electronic, mechanical, and electromechanical tests on electronic systems, subassemblies, and parts to ensure unit functions according to specifications or to determine the cause of unit failure.Responsibilities<ul><li>Read test schedule, work orders, test manuals, performance specifications, wiring diagrams, and schematics to determine testing procedure and equipment to be used.</li><li>Test functional performance of systems, subassemblies, and parts under specified environmental conditions such as temperature change, vibration, pressure, and humidity.</li><li>Calibrate test instruments according to specifications.</li><li>Connect unit to be tested to test equipment such as signal generator, frequency meter, DC power supply, or spectrum analyzer.</li><li>Read dials or digital displays that indicate electronic characteristics such as voltage, frequency, distortion, inductance, and capacitance.</li><li>Compare results with specifications and record test data or plot test results on graph.</li><li>Analyze test results on defective units to determine cause of failure.</li><li>Replace defective wiring and components or record defects on tag attached to unit and return unit to production department for repair.</li><li>Confer with engineers, technicians, production personnel, and others regarding testing procedures and results and to resolve problems.</li><li>Verify dimensions of pins, shafts, and other mechanical parts.</li><li>Devise test equipment setup to evaluate performance and operation of non-standard or customer returned units.</li></ul>Essential Skills<ul><li>Proficiency in electrical, electronic, and mechanical testing.</li><li>Experience with electronic test equipment and troubleshooting.</li><li>Associate's degree or equivalent from a two-year college or technical school; or 2 years of technical training/experience.</li><li>Skilled at using Microsoft Suite.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience with electronics or electrical testing, tools, mechanical assembly, soldering, circuit board, wiring, harness assembly, and crimping.</li><li>Ability to lift 50lbs.</li></ul>Why Work Here?Enjoy competitive benefits including a raise upon hiring and annual raises, 80% of medical expenses paid by the company for you and your family, and a great 401k match. Benefit from 2 weeks of vacation and be part of a vibrant workplace with employee engagement activities such as parties, anniversary celebrations, and giveaways.Work EnvironmentWork in a clean environment at a steady pace. The dress code includes long pants such as jeans, khakis, or Dickies. The first shift runs from 7 am to 3:30 pm, with multiple openings for different roles. The second shift runs from 3 pm to 11:30 pm.Job Type &amp; LocationThis is a Contract to Hire position based out of Bethlehem, PA.Pay and BenefitsThe pay range for this position is $20.00 - $24.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Bethlehem,PA.Application DeadlineThis position is anticipated to close on Dec 19, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Test TechnicianJob DescriptionAs a Quality/Test Technician, you will play a crucial role in ensuring the quality and reliability of electrical and mechanical components. You will be responsible for inspecting these components against supplied drawings and specifications and ensuring conformance to customer requirements on finished assemblies. Your duties will also include maintaining tooling and equipment, logging documentation, and assisting with process improvements and the Quality Management System.Responsibilities<ul><li>Inspect incoming electrical and mechanical components to ensure they meet supplied drawings and specifications.</li><li>Verify conformance to customer product requirements on finished assemblies using customer drawings and specifications.</li><li>Implement and maintain tooling and equipment, including preventative maintenance.</li><li>Maintain logs and documentation for the Equipment and Tooling Preventative Maintenance Program.</li><li>Complete assigned projects to assist with process improvements and the Quality Management System.</li><li>Maintain accurate inspection records.</li><li>Assist with reporting and processing non-conforming materials.</li><li>Assist with the training of production personnel as required.</li></ul>Essential Skills<ul><li>Minimum of 2 years in a quality role.</li><li>Experience with inspection of mechanical and electrical components.</li><li>Strong attention to detail.</li><li>Ability to speak, read, and write in English.</li><li>Proficiency in reading schematics and blueprints.</li><li>Knowledge of Quality Management Systems (QMS).</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in assembly, wiring, crimping, and production.</li><li>Familiarity with control panel, mechanical assembly, electrical assembly, and electrical wiring.</li><li>Prior experience in quality control, assurance, and inspection.</li></ul>Why Work Here?Once permanent, you will enjoy benefits such as medical, dental, vision, 401k, and PTO. The company is family-owned and rapidly growing, offering numerous opportunities for advancement. You will work in a very nice, clean, and well-maintained environment that is consistently updated.Work EnvironmentThe work environment is very clean, well-lit, temperature-controlled, and highly organized. Each person has their own workstation for the day. The typical hours are 7 AM to 3:30 PM, with half-day Saturdays encouraged, working from 7 AM to 12:30 PM.Job Type &amp; LocationThis is a Contract to Hire position based out of Uxbridge, MA.Pay and BenefitsThe pay range for this position is $21.00 - $23.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Uxbridge,MA.Application DeadlineThis position is anticipated to close on Dec 22, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TechnicianJob DescriptionWe are seeking a skilled Technician to join our team. The ideal candidate will set up test equipment and conduct tests according to specifications, utilizing both mechanical and electronic test equipment such as oscilloscopes and micrometers. This role involves troubleshooting and performing failure analysis on analog and digital circuitry malfunctions down to the component level. You will provide detailed written failure descriptions with root cause analysis to production and engineering teams. Adherence to company guidelines, policies, and safety procedures is essential.Responsibilities<ul><li>Set up and operate test equipment according to specifications.</li><li>Perform troubleshooting and failure analysis of analog and digital circuitry malfunctions to the component level.</li><li>Provide detailed written failure descriptions with root cause analysis for production and engineering.</li><li>Follow written and verbal instructions and adhere to company guidelines and safety procedures.</li><li>Assist other departments with tasks in various production cells or locations.</li><li>Maintain a safe and clean work environment, ensuring compliance with safety rules.</li><li>Ensure regular, consistent, and punctual attendance.</li></ul>Essential Skills<ul><li>Proficiency in troubleshooting and failure analysis of analog and digital circuitry.</li><li>Knowledge of electrical test equipment, including oscilloscopes, multimeters, and power supplies.</li><li>Ability to perform maintenance and alteration tasks according to technical data.</li><li>Experience with drawings, procedures, work instructions, inspections, audits, and corrective actions.</li><li>6 months to 2+ years of testing experience in actuators and controls.</li><li>Ability to read and communicate effectively in English.</li><li>Proficiency in Microsoft Office applications for documentation.</li><li>High School Diploma required; BA/BS preferred for leadership roles.</li></ul>Additional Skills &amp; Qualifications<ul><li>Mechanical assembly experience.</li><li>Testing and troubleshooting of printed circuit board assemblies (PCBAs).</li><li>Optional certifications: J-STD, IPC-610.</li></ul>Why Work Here?Join a team-oriented culture with a focus on safety and employee well-being. Enjoy benefits such as abundant parking, team events, and a clean work environment. Once permanent, employees receive comprehensive medical, dental, and vision coverage from day one, retirement benefits with a 401(k) match, and generous paid time off policies. Engage in a workplace that promotes diversity, equity, and inclusion through Business Resource Groups. Benefit from rideshare incentives and an employee referral program.Work EnvironmentWork in a manufacturing environment with occasional noise, focusing on electronics or electro-mechanical devices during the 1st shift, Monday to Friday, from 5:00 AM to 1:30 PM. Optional overtime is available up to 10% per year, depending on production needs. Safety is a priority, with safety glasses and steel toe shoes provided. The assignment is temporary to hire over approximately four months.Job Type &amp; LocationThis is a Contract to Hire position based out of Simi Valley, CA.Pay and BenefitsThe pay range for this position is $24.24 - $24.24/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Simi Valley,CA.Application DeadlineThis position is anticipated to close on Dec 19, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Test Technician Job DescriptionWe are seeking a skilled Test Technician to perform comprehensive testing on our products post-assembly. The primary focus will be to ensure that all systems are functional before the product launch and to verify device operations prior to quality inspection.Responsibilities<ul><li>Conduct final functional, operational, and performance testing of Hero loitering munitions.</li><li>Perform hands-on testing of electronic and mechanical components in a controlled environment.</li><li>Collaborate with engineers and production teams to identify and resolve any performance issues or discrepancies.</li><li>Inspect and verify the proper calibration and functioning of equipment used in the final testing process.</li><li>Document and report test results, troubleshooting procedures, and any issues that arise during the testing phase.</li><li>Provide recommendations for process improvements to enhance testing efficiency and quality assurance practices.</li><li>Troubleshoot malfunctions or failures and work with design or engineering teams to correct any defects.</li><li>Support quality control teams with detailed assessments and verification of final product condition before shipping.</li><li>Assist in the investigation of malfunctions and phenomena that arise as part of the integration, testing, and trial processes.</li></ul>Essential Skills<ul><li>3+ years of experience in an ATP or testing technician role, ideally within the defense, aerospace, or high-tech manufacturing industries.</li><li>Strong understanding of electro-mechanical systems and test procedures.</li><li>Proficiency in using electronic test equipment.</li><li>Experience with troubleshooting, diagnosing, and repairing complex systems and components.</li><li>Ability to interpret technical manuals, schematics, and drawings to perform tests.</li><li>Strong verbal and written communication skills.</li></ul>Additional Skills &amp; Qualifications<ul><li>Troubleshooting</li><li>Test equipment</li><li>Assembly</li><li>Schematic</li><li>Electronic assembly or mechanical assembly</li><li>Systems troubleshooting, diagnostic and repair</li><li>Blueprint/schematic reading</li><li>Electronics</li><li>Blueprint</li></ul>Why Work Here?Join a growing company with a strong focus on work-life balance and opportunities for professional growth. We pride ourselves on fostering a positive work environment and encouraging personal development.Work EnvironmentThis position operates within a production/warehouse environment, adhering to a Monday through Friday schedule, with first shift hours from 8 AM to 5 PM.Job Type &amp; LocationThis is a Permanent position based out of Stafford, VA.Pay and BenefitsThe pay range for this position is $62000.00 - $75000.00/yr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:• Medical, dental &amp; vision • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Stafford,VA.Application DeadlineThis position is anticipated to close on Dec 17, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Test Technician - DIRECT HIRE Pay: $25-30/hr Hours: 7am-3:30pmJob DescriptionThe Test Technician will be responsible for testing, troubleshooting, and documenting wiring and functional issues according to wiring diagrams and test procedures. The role involves testing prototype models as per engineering instructions, interfacing with production and engineering personnel to address nonconformance issues, and programming PLCs for load step applications. The technician will also set up electronic components, develop test simulations, assist in training new testers, and perform final inspections to ensure quality and safety.Responsibilities<ul><li>Test, troubleshoot, correct, and document wiring and functional problems as per wiring diagrams and test procedures.</li><li>Test prototype models based on engineering instructions and knowledge of electronic systems.</li><li>Collaborate with production and engineering personnel to record and rectify physical and design nonconformance issues.</li><li>Program and test PLCs for load step applications.</li><li>Set up electronic components and protective circuits according to test specifications.</li><li>Develop and build test simulations for engineering.</li><li>Assist in training new testers in test techniques, equipment set-up, and operation.</li><li>Perform final inspections on all tested units.</li><li>Promote a safe work environment.</li><li>Perform additional duties as assigned by the supervisor.</li></ul>Essential Skills<ul><li>Ability to read and follow schematics of complex electrical and mechanical circuits.</li><li>Proficiency in troubleshooting, electronics, electrical, and mechanical systems.</li><li>Experience with calibration, multimeters, and testing equipment.</li><li>Knowledge of 480 Volt systems, PLCs, circuits, and hand tools.</li><li>Inspection and electro-mechanical skills.</li></ul>Additional Skills &amp; Qualifications<ul><li>2 years of Electronics and Electrical experience.</li><li>Knowledge of electrical principles and power management.</li><li>Familiarity with LO/TO and OSHA electrical safety.</li><li>Knowledge of PLC interface, computer programming, and networking skills.</li></ul>Job Type &amp; LocationThis is a Permanent position based out of Bedford, OH.Pay and BenefitsThe pay range for this position is $54080.00 - $54080.00/yr.• Diverse- fast pace training environment • Will be trained to work on their own and trusted with little supervision • Summit picnics and lunches • 401K- dollar per dollar match on 6% • Family oriented company • Growth is highly encouraged and tuition reimbursement is an option for all employeesWorkplace TypeThis is a fully onsite position in Bedford,OH.Application DeadlineThis position is anticipated to close on Dec 18, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: Test TechnicianJob DescriptionWe are currently hiring Test Technicians for a manufacturing facility in Jacksonville, FL. In this role, you will be responsible for performing quality inspections (visual and testing) of electrical cabinets and industrial power systems. You will be required to use electrical testing tools and equipment as well as document quality inspections. This position is responsible for quality inspections, assembly, and testing the functionality of Power Distribution Centers and individual components within, while validating the overall functionality of the completed project.Overview:<ul><li>Job title: Test Technician</li><li>Location: Jacksonville, FL (northside)</li><li>Shift: 6:00am-2:30pm (M-F)</li><li>Pay: $20-$22/hr (based on experience)</li><li>Manufacturing environment (non-climate controlled)</li><li>Perform quality inspections and functional testing of units in accordance with established work instructions, guidelines, and internal quality documentation.</li><li>Assemble components in accordance with the bill of materials (BOM) and detailed work instructions.</li><li>Execute established repair procedures on units as required to ensure compliance with quality standards.</li><li>Collaborate with team coordinators to address troubleshooting needs, rework tasks, and Return Material Authorization (RMA) processes.</li></ul>Qualifications:<ul><li>Quality experience in a manufacturing setting is required.</li><li>Basic Computer skills; Teams, Outlook, Word, Excel, and PowerPoint.</li><li>Ability to working in non-climate controlled environments</li><li>High attention to detail</li></ul>Benefits:This is a contract-to-hire position (90 days) with benefits offered while on contract. Company has the following benefits once permanent:<ul><li>Free Employee Benefits (Medical, Vision, Dental)</li><li>10 Paid Holidays</li><li>Quarterly Profit Sharing Bonuses</li><li>Safety Shoes Stipend</li><li>Growing Company with Opportunity for Advancement</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of Jacksonville, FL.Pay and BenefitsThe pay range for this position is $20.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Jacksonville,FL.Application DeadlineThis position is anticipated to close on Dec 18, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Test Technician 25 To 30 An Hour

Job Title: Tester Operator - 6:30am-3:00pmJob DescriptionWe are seeking a dedicated Tester Operator to perform a range of electronically automated tests for STB equipment, ensuring that each unit functions according to specifications or identifying causes of unit failure. This role is integral to supporting our Q4 Burst ramp and requires a strong commitment to the work schedule to meet our customer KPIs.Responsibilities<ul><li>Load programming onto MSI servers or large electronic devices.</li><li>Plug large electronic devices into a computer and load computer programs/software onto them.</li><li>Move electronic devices weighing up to 50lbs from the floor to the workbench.</li><li>Perform quality checks to ensure installed software functions correctly and meets quality standards.</li><li>Use specific software and tools to install, configure, or flash software onto electronic products or components.</li><li>Move boxes and electronic equipment within the same department.</li></ul>Essential Skills<ul><li>Proficiency in software imaging and technical expertise.</li><li>Technological savviness and comfort working on computers.</li><li>Strong attention to detail for ensuring correct software versions and quality standards.</li><li>Good typing skills and ability to follow computer screen prompts.</li><li>English proficiency for reading, writing, and communicating effectively.</li></ul>Additional Skills &amp; Qualifications<ul><li>Basic testing and software installation experience.</li><li>Technical aptitude and willingness to learn specific software and hardware.</li></ul>Why Work Here?We offer a structured path for career advancement with incremental pay increases. Once hired permanently, you'll receive a 50 cent increase, followed by a 10 cent raise each month, amounting to an additional $1.20/hr each year.Work EnvironmentThe work environment is clean and climate-controlled. The first shift operates from 6:30 AM to 3:00 PM, Monday through Friday. The facility is metal-free, and the role demands adherence to the CTDI Attendance Policy.Job Type &amp; LocationThis is a Contract position based out of Lewisville, TX.Pay and BenefitsThe pay range for this position is $16.00 - $16.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Lewisville,TX.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Tester Operator

Job Title: TIG Welder 1st Shift $28 Per Hour Job DescriptionWe are seeking a skilled TIG Welder to join our team. Responsibilities<ul><li>Perform TIG welding on various metals, including stainless steel, aluminum, and titanium, to create strong and precise joints.</li><li>Read and interpret blueprints, schematics, and welding codes to determine welding requirements.</li><li>Select and set up welding equipment, including torch tips, filler rods, and flux, according to the thickness and type of metal.</li><li>Inspect completed welds to ensure they meet specifications and are free of defects.</li><li>Adhere to all safety protocols and guidelines, including the use of personal protective equipment (PPE) and maintaining a clean work environment.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience welding with titanium.</li><li>Bilingual abilities.</li></ul>Why Work Here?Employees receive medical, dental, and vision insurance to ensure their health and well-being. The company provides retirement benefits, including 401(k) plans, to help employees plan for their future. Vacation days, sick leave, and paid holidays are offered to support work-life balance. Opportunities for training and career advancement are available to help employees grow within the company. The company emphasizes a healthy work-life balance, offering flexible work schedules where possible. Employee assistance programs are available to help employees with personal or work-related issues.Work EnvironmentThe work hours are from 6 am to 2:30 pm. The company is a manufacturing environment with various machines such as CNCs, punch presses, and laser machines. The dress code includes jeans, steel-toed boots, and a T-shirt.Job Type &amp; LocationThis is a Contract to Hire position based out of Northbrook, IL.Pay and BenefitsThe pay range for this position is $25.00 - $27.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Northbrook,IL.Application DeadlineThis position is anticipated to close on Dec 19, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Tig Welder

<h3>🔥 TIG Welder Wanted – Build Aerospace Dreams in Monroe City, MO 🔥</h3>Do you have the precision of a surgeon and the focus of a pilot?We’re looking for a TIG Welding Rockstar to join our elite team crafting high-precision aerospace components. If you love working with exotic metals and pushing the limits of accuracy, this is YOUR stage.<hr><h4>Your Mission</h4><ul><li>Weld aerospace alloys like aluminum, titanium, Inconel with x-ray quality precision.</li><li>Read blueprints like a pro and turn them into flawless reality.</li><li>Tame distortion and shrinkage with creative solutions.</li><li>Operate CNC machines (3, 4, 5, and 9-axis) like a boss.</li><li>Keep your workspace clean and organized—because precision starts with discipline.</li></ul><hr><h4>What We Need</h4><ul><li>6+ years of TIG welding experience in aerospace or high-precision environments.</li><li>Ability to weld thin (.025"-.060") materials and pass radiographic tests.</li><li>AWS D17.1 knowledge preferred; CWI certification = bonus points.</li><li>A sharp eye for detail and steady hands for perfection.</li></ul><hr><h4>Why You’ll Love It Here</h4><ul><li>Monthly performance incentives up to $550.</li><li>Merit-based raises and career growth.</li><li>Safety &amp; 6S rewards + chances to win tickets to major events.</li><li>Work in a climate-controlled shop with cutting-edge CNC tech.</li></ul><hr>📍 Location: Monroe City, Missouri🕒 Shifts:<ul><li>Mon–Thu: 6am–4pm (1st) | 3:30pm–2am (2nd) + $2 shift differential</li><li>Weekend: Fri–Sun with $2 (1st) and $4 (3rd) shift differential</li></ul><hr><hr>💡 Pro Tip: Bring your passion for precision—we’ll bring the opportunities.Job Type &amp; LocationThis is a Contract to Hire position based out of Saint Peters, MO.Pay and BenefitsThe pay range for this position is $25.00 - $35.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Saint Peters,MO.Application DeadlineThis position is anticipated to close on Dec 22, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

About the Role: We’re looking for a skilled Aluminum Welders to take on complex, high-precision welding projects in a dynamic and supportive environment. This is a first-shift opportunity with plenty of overtime potential for those who want to maximize their earnings.What You’ll Do:<ul><li>Perform TIG welding on aluminum and stainless steel assemblies</li><li>Set up and operate welding machines independently for various processes and thicknesses</li><li>Fabricate and weld intricate components from blueprints and technical drawings</li><li>Operate fabrication equipment including plate rollers, pipe rollers, saws, and drill presses</li><li>Maintain high standards of quality and precision throughout the welding process</li></ul>What We’re Looking For:<ul><li>Minimum 3 years of TIG welding experience</li><li>Strong proficiency with aluminum and stainless steel</li><li>Ability to read and interpret blueprints accurately</li><li>Experience fabricating complex assemblies without supervision</li><li>Familiarity with hand tools and fabrication equipment</li></ul>Why Join Us:<ul><li>Competitive pay up to $32/hr based on experience and weld test</li><li>Consistent first-shift schedule with overtime opportunities</li><li>Low turnover and a team-oriented shop culture</li><li>Weld cell layout designed for efficiency and productivity</li></ul>Work Environment:<ul><li>Fabrication shop setting with state-of-the-art equipment</li><li>Non-climate-controlled facility</li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of North Charleston, SC.Pay and BenefitsThe pay range for this position is $27.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in North Charleston,SC.Application DeadlineThis position is anticipated to close on Dec 24, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h3>Job Title: TIG Welder</h3>Location: Chaska, MNPay: $30/hrShift: 1st Shift 7am-3:30pm<hr><h3>About the Role</h3>We’re looking for a skilled TIG Welder to join our growing team! In this role, you’ll perform custom TIG welding to build high-quality water filtration systems. You’ll also assist with metal cutting and fabrication tasks, ensuring precision and efficiency in every project.<hr><h3>Key Responsibilities</h3><ul><li>Read and interpret engineering drawings and blueprints</li><li>Grind and cut metal to size</li><li>Set up production areas for maximum efficiency</li><li>Position and secure parts using fixtures, clamps, and stands</li><li>Create jigs for production runs when needed</li><li>Follow welding procedure specifications for quality and conformity</li><li>Safely handle and connect gas cylinders to fabrication equipment</li><li>Set up and maintain welding machines</li><li>Inspect welds for bead size and specifications</li><li>Repair broken or cracked metal parts and fill holes</li><li>Weld in flat, horizontal, vertical, and overhead positions</li><li>Prepare joints and remove discontinuities before continuing fabrication</li><li>Clean and degrease parts</li></ul><hr><h3>Essential Skills</h3><ul><li>Proficiency in TIG welding on stainless piping</li><li>Ability to read and interpret blueprints</li><li>Willingness to assist with assembly, MIG welding, and electrical work</li><li>Ability to pass a 2–3" pipe/butt weld test</li><li>Strong understanding of safety rules and procedures</li></ul><hr><h3>Qualifications</h3><ul><li>One-year technical certificate or equivalent experience</li><li>Welding certification preferred</li><li>Ability to pass a 3” 304 sch. 40 6G pipe test and a ½” 304 sch. 10 6G pipe test</li><li>Strong math skills and ability to follow instructions</li></ul><hr><h3>Why Join Us?</h3><ul><li>Supportive team environment with growth opportunities</li><li>144 hours of PTO within the first five years</li><li>Annual performance-based raises (1–5%)</li><li>Temperature-controlled facility</li><li>Work alongside a team of experienced welders</li></ul><hr>✅ Ready to take your welding career to the next level? Apply today and join a company that values your skills and invests in your future!Job Type &amp; LocationThis is a Contract to Hire position based out of Chaska, MN.Pay and BenefitsThe pay range for this position is $24.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Chaska,MN.Application DeadlineThis position is anticipated to close on Dec 23, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: 2nd Shift TIG WelderJob DescriptionWe are seeking a skilled 2nd Shift TIG Welder to join our team. This position involves working with a variety of materials, including sheet metal, carbon steel, aluminum, stainless steel, and copper. The ideal candidate will perform weldments with exceptional appearance and ensure no leaks, while also assisting in training and maintaining a clean work area.Responsibilities<ul><li>Weld a variety of materials such as sheet metal, carbon steel, aluminum, stainless steel, and copper with no leaks.</li><li>Perform weldments with exceptional appearance.</li><li>Conduct inter-piping, including fitting, aligning, and adjustments.</li><li>Operate hand-welding and flame-cutting equipment such as oxyacetylene torches.</li><li>Read blueprints and drawings to identify welding measurements and positions.</li><li>Troubleshoot product issues with assistance.</li><li>Monitor equipment operation to ensure proper heat settings and weld tip.</li><li>Perform preventative maintenance on welding machines.</li><li>Use a variety of air and electric hand tools.</li><li>Assist in training Welder I and II.</li><li>Perform leak tests.</li><li>Operate crane forklifts.</li><li>Ensure compliance with safety protocols by wearing protective glasses, gloves, masks, ear plugs, and boots.</li><li>Keep an organized and clean work area.</li><li>Perform additional duties as needed, including weld and assembly and training on laser weld pans.</li></ul>Essential Skills<ul><li>Proficient in TIG welding.</li><li>Experience with thin gauge metals.</li><li>Pipe welding techniques including arc, MIG, and TIG welding.</li><li>Blueprint reading experience.</li><li>Experience welding with aluminum and stainless steel.</li></ul>Additional Skills &amp; Qualifications<ul><li>6G Certifications.</li><li>Experience with pressure vessels.</li><li>Vocational schooling.</li><li>Approximately 3 years of experience, which can include schooling.</li></ul>Why Work Here?Join a dynamic work environment where challenging projects expose you to unique welding tasks. Enjoy merit increases based on performance, leadership opportunities, and tuition reimbursement. Benefit from provided welding gear and a $150 allowance for boots/equipment. Experience flexibility and the potential to work in various departments based on workload.Work EnvironmentThe work hours are from 2:15 pm to 12:45 am with potential flexibility, including up to 10 extra hours a week and a 5-hour shift on Saturdays. Our team consists of 9 people, including 6 TIG welders and 3 MIG welders, in a laid-back environment where training is hands-on. Weld areas for coil and sheet metal are separated. The dress code includes boots, long pants with no holes, and flame-retardant shirts.Job Type &amp; LocationThis is a Contract to Hire position based out of Dixon, Illinois.Job Type &amp; LocationThis is a Contract to Hire position based out of Dixon, IL.Pay and BenefitsThe pay range for this position is $23.00 - $27.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Dixon,IL.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Aerospace manufacturer in Lancaster, PA is looking for an Aluminum TIG Welder on 1st and 2nd shift. Pay will depend on experience, and ranges between $25-34/hr. Company is seeing increased business demand and needs to grow their team. Responsibilities<ul><li>Operate manual welder to TIG weld components safely according to specifications.</li><li>Follow weld instructions and complete projects based on blueprints.</li><li>Perform tack-weld functions to join metal workpieces at specified distances.</li><li>Inspect and record quality requirements of finished workpieces.</li><li>Use all safety devices/tools to ensure safe operation of welding processes.</li><li>Ensure work area is kept clean and organized at all times.</li><li>Comply with company policies and procedures.</li></ul>Essential Skills<ul><li>High school diploma, GED, or equivalent technical school diploma preferred.</li><li>5+ years of related experience and/or training preferred.</li><li>Proficient in using micrometers, calipers, and other measuring tools.</li><li>Ability to read and work to set tolerances from blueprints.</li><li>Ability to set up and operate welding machines.</li></ul>***Interviews are being scheduled over the next 2 weeks and looking to have candidates start ASAP***Job Type &amp; LocationThis is a Contract to Hire position based out of Lancaster, PA.Pay and BenefitsThe pay range for this position is $25.00 - $34.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Lancaster,PA.Application DeadlineThis position is anticipated to close on Dec 13, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h3>Job Title: TIG Welder</h3>Location: Chaska, MNPay: $30/hrShift: 1st Shift 7am-3:30pm<hr><h3>About the Role</h3>We’re looking for a skilled TIG Welder to join our growing team! In this role, you’ll perform custom TIG welding to build high-quality water filtration systems. You’ll also assist with metal cutting and fabrication tasks, ensuring precision and efficiency in every project.<hr><h3>Key Responsibilities</h3><ul><li>Read and interpret engineering drawings and blueprints</li><li>Grind and cut metal to size</li><li>Set up production areas for maximum efficiency</li><li>Position and secure parts using fixtures, clamps, and stands</li><li>Create jigs for production runs when needed</li><li>Follow welding procedure specifications for quality and conformity</li><li>Safely handle and connect gas cylinders to fabrication equipment</li><li>Set up and maintain welding machines</li><li>Inspect welds for bead size and specifications</li><li>Repair broken or cracked metal parts and fill holes</li><li>Weld in flat, horizontal, vertical, and overhead positions</li><li>Prepare joints and remove discontinuities before continuing fabrication</li><li>Clean and degrease parts</li></ul><hr><h3>Essential Skills</h3><ul><li>Proficiency in TIG welding on stainless piping</li><li>Ability to read and interpret blueprints</li><li>Willingness to assist with assembly, MIG welding, and electrical work</li><li>Ability to pass a 2–3" pipe/butt weld test</li><li>Strong understanding of safety rules and procedures</li></ul><hr><h3>Qualifications</h3><ul><li>One-year technical certificate or equivalent experience</li><li>Welding certification preferred</li><li>Ability to pass a 3” 304 sch. 40 6G pipe test and a ½” 304 sch. 10 6G pipe test</li><li>Strong math skills and ability to follow instructions</li></ul><hr><h3>Why Join Us?</h3><ul><li>Supportive team environment with growth opportunities</li><li>144 hours of PTO within the first five years</li><li>Annual performance-based raises (1–5%)</li><li>Temperature-controlled facility</li><li>Work alongside a team of experienced welders</li></ul><hr>✅ Ready to take your welding career to the next level? Apply today and join a company that values your skills and invests in your future!Job Type &amp; LocationThis is a Contract to Hire position based out of Chaska, MN.Pay and BenefitsThe pay range for this position is $24.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Chaska,MN.Application DeadlineThis position is anticipated to close on Dec 24, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

TIG WelderPosition SummaryWe’re seeking a skilled TIG Welder to join a high-volume production team specializing in hydraulic components. This role involves precision welding of round, thin-wall tubing using a foot-operated turntable and overhead techniques. You’ll work primarily with mild steel (80%) and stainless steel (20%) across a variety of assemblies including pump liners, manifolds, and custom tube builds.Key Responsibilities<ul><li>Perform TIG welding using a foot-operated turntable and overhead techniques</li><li>Weld hydraulic pump liners, tube assemblies, manifolds, and fabricated tubular parts</li><li>Fit and prep tubing for welds</li><li>Maintain consistency in high-volume production runs (average order: 50 pieces)</li><li>Ensure welds meet blueprint specifications and quality standards</li></ul>Qualifications<ul><li>TIG welding experience or completion of a welding technical program</li><li>Ability to read and interpret blueprints</li><li>Willingness to work overtime as needed</li></ul>Why Join Us?<ul><li>Medical Coverage: Company covers most of the cost with a low deductible</li><li>Retirement Benefits: 401(k) with company match + performance-based stock plan</li><li>Paid Time Off: 2 weeks starting PTO + 6 paid sick days (unused days paid out annually)</li><li>Bonuses:<ul><li>Christmas bonus equal to one full week of pay</li><li>End-of-year bonus up to 5% of annual salary (based on company performance</li></ul></li></ul>Job Type &amp; LocationThis is a Contract to Hire position based out of New Hope, MN.Pay and BenefitsThe pay range for this position is $26.00 - $27.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in New Hope,MN.Application DeadlineThis position is anticipated to close on Dec 26, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TIG WelderJob DescriptionWe are seeking a skilled TIG Welder to join our team. The ideal candidate will be responsible for performing tungsten inert gas (TIG) welding to join metal parts, ensuring high-quality and precise welds. This role requires a strong attention to detail, adherence to safety standards, and the ability to work efficiently in a fast-paced environment.Responsibilities<ul><li>Perform TIG welding on various metals, including stainless steel, aluminum, and titanium, to create strong and precise joints.</li><li>Read and interpret blueprints, schematics, and welding codes to determine welding requirements.</li><li>Select and set up welding equipment, including torch tips, filler rods, and flux, according to the thickness and type of metal.</li><li>Inspect completed welds to ensure they meet specifications and are free of defects. Conduct radiographic and bend tests as needed.</li><li>Adhere to all safety protocols and guidelines, including the use of personal protective equipment (PPE) and maintaining a clean work environment.</li><li>Perform routine maintenance on welding equipment and report any malfunctions or defects.</li><li>Work closely with other team members, including engineers and fabricators, to complete projects efficiently and accurately.</li><li>Maintain accurate records of welding parameters and completed tasks.</li></ul>Essential Skills<ul><li>2-3 years of TIG welding experience using old school pedals on stainless steel.</li><li>Experience with blueprint reading.</li><li>Experience with basic mechanical assembly.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience welding with titanium.</li><li>Bilingual abilities.</li></ul>Why Work Here?Employees receive medical, dental, and vision insurance to ensure their health and well-being. The company provides retirement benefits, including 401(k) plans, to help employees plan for their future. Vacation days, sick leave, and paid holidays are offered to support work-life balance. Opportunities for training and career advancement are available to help employees grow within the company. The company emphasizes a healthy work-life balance, offering flexible work schedules where possible. Employee assistance programs are available to help employees with personal or work-related issues.Work EnvironmentThe work hours are from 6 am to 2:30 pm. The company is a manufacturing environment with various machines such as CNCs, punch presses, and laser machines. The dress code includes jeans, steel-toed boots, and a T-shirt.Job Type &amp; LocationThis is a Contract to Hire position based out of Northbrook, IL.Pay and BenefitsThe pay range for this position is $25.00 - $27.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Northbrook,IL.Application DeadlineThis position is anticipated to close on Dec 24, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

<h3 style="text-align:center;">TIG Welder – Up to $32/hr</h3>Join a leading manufacturer serving the food industry! We’re looking for a skilled TIG Welder to produce high-quality, custom equipment in a dynamic, precision-driven environment.<h4>What You’ll Do</h4><ul><li>Perform TIG and MIG welding on thin stainless steel components.</li><li>Fabricate custom, short-run, and prototype equipment for food industry applications.</li><li>Read and interpret blueprints to ensure accuracy and compliance.</li><li>Apply strong math skills for precise measurements and welding tasks.</li><li>Execute intricate welding processes—both manual and machine—to meet exacting standards.</li><li>Operate welding equipment, adjust machine settings, and use a variety of hand tools and measuring instruments.</li><li>Handle fixturing and set-up as needed for complex fabrications.</li></ul><h4>What We’re Looking For</h4><ul><li>Experience: 7+ years of welding experience.</li><li>Technical Skills: Proficiency in TIG and MIG welding, especially with food-grade stainless steel.</li><li>Certifications: Welder qualifications per ASME Section IX and/or AWS D1.1 for GTAW, FCAW, and/or GMAW in Horizontal, Vertical, and All Positions.</li><li>Additional Skills: Ability to read blueprints and apply strong math skills for precision work.</li></ul>Job Type &amp; LocationThis is a Permanent position based out of Anoka, MN.Pay and BenefitsThe pay range for this position is $27.00 - $36.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Anoka,MN.Application DeadlineThis position is anticipated to close on Dec 17, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Hiring for a TIG Aerospace Welder in O'Fallon, MO - Direct Placement can Interview and Start ASAP!Shift-1st Shift M-F (6 AM - 2:30pm)Pay Rate- $26-$35/HRLocation- O FALLON, Missouri, 63366Job Description<ul><li>Will perform MIG and TIG aluminum, steel and stainless steel welding on customized platforms, mezzanines, ladders, stairs and steps</li><li>Welding 1/4 inch to 3/8 inch</li><li>Fabricates parts according to blue prints and drawings; all custom orders</li><li>Fabricates parts by using equipment to clean, prepare, cut, burn, and weld pieces; setting up and measuring assemblies</li><li>Verifies welding results by inspecting and testing welds</li></ul>SkillsMIG, TIG, Fabrication, Aluminum, Steel, Vertical, Weld, AerospaceAdditional Skills &amp; QualificationsThe qualified candidate must have the following:*Minimum of 3 years MIG/TIG welding experience*Minimum of 2 years experience MIG/TIG welding on aluminum*Must be able to perform vertical and horizontal welds*Must have the ability to read blueprints and drawings; all customized products*Must have experience examining weld for bead size and other specificationsLooking for someone with 5+ years exp- not an entry level roleJob Type &amp; LocationThis is a Permanent position based out of O FALLON, MO.Pay and BenefitsThe pay range for this position is $54000.00 - $72000.00/yr.Health and wellness Health insurance Dental insurance Company-paid life insurance Voluntary life insurance Company-paid long-term disability Flexible Spending Accounts (FSA) for medical or dependent care costs Employee Assistance Program (EAP) Financial 401(k) retirement savings plan with an employer match, Social Security, and Pension. Time off Paid vacations and holidays Some sources indicate vacation time is limited for new employees and may consist of two days, but this can vary.Workplace TypeThis is a fully onsite position in O FALLON,MO.Application DeadlineThis position is anticipated to close on Dec 18, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TIG WelderJob DescriptionWe are seeking a skilled TIG Welder with experience in stainless steel to join our team. The role involves welding tasks and assisting with the assembly of automated systems, such as conveyors, weighing scales, and machinery for industrial manufacturing plants.Responsibilities<ul><li>Perform TIG welding on stainless steel materials.</li><li>Assist in the assembly of automated systems, including conveyors and industrial machinery.</li><li>Finish, grind, and polish TIG welds to meet quality standards.</li><li>Collaborate with the shop team to support assembly, shipping, and polishing tasks.</li></ul>Essential Skills<ul><li>2+ years of experience in TIG welding on stainless steel.</li><li>Proficiency in finishing, grinding, and polishing TIG welds.</li><li>Ability to assemble and fabricate metal components.</li></ul>Job Type &amp; LocationThis is a Contract position based out of Schertz, TX.Pay and BenefitsThe pay range for this position is $20.00 - $25.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Schertz,TX.Application DeadlineThis position is anticipated to close on Dec 15, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job Title: TIG WelderEssential Skills<ul><li>Ability to perform TIG welding on steel with 11, 14, and 16 gauge thickness.</li><li>Proficiency in reading blueprints.</li><li>Comfortable operating a press brake as needed.</li></ul>Why Work Here?Enjoy working in a climate-controlled, clean shop with a supportive team. Benefit from a competitive 401k match of $0.50 to every dollar for the first 6% of your salary contribution. Choose from high deductible or lower deductible health care plans, and enjoy vision and dental coverage for under $7 bi-weekly for individuals. PTO is accrued at 4 hours per bi-weekly paycheck, and you will have 10 holidays off.Job Type &amp; LocationThis is a Permanent position based out of Dillsburg, PA.Pay and BenefitsThe pay range for this position is $21.00 - $23.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Dillsburg,PA.Application DeadlineThis position is anticipated to close on Dec 19, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

****TIG Welders- Will pay up to $33/hr******1st or 2nd shift***Long term opportunity- Climate controlledExtremely clean environment.Apply Now.Description:<ul><li>As a Tig Welder you will have the following Responsibilities:</li><li>Tig Welding (50%) and assembly (50%) of different types of process equipment for the food industry. All equipment is stainless food grade</li><li>Weld and assemble pipes and pipe parts in acid-resistant stainless steel</li><li>TIG welding (pulsating), manual and mechanized</li><li>Must be able to crawl in and out of containers</li><li>Process check in according to quality requirements</li><li>Rework of the labor work sheets and submit</li></ul>Job Type &amp; LocationThis is a Permanent position based out of Glencoe, MN.Pay and BenefitsThe pay range for this position is $25.00 - $33.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Glencoe,MN.Application DeadlineThis position is anticipated to close on Dec 18, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Tig Welder - Direct Employment

Job Title: Tile Craftsman Job DescriptionWe are seeking an experienced Tile Setter to join our team in a state-of-the-art home manufacturing facility. This role is critical to achieving the highest quality finish standards in residential construction. The ideal candidate will have advanced skills in tile installation and a strong eye for detail.Shift: 1st Shift (6am-2:30pm) M-F, with OT opportunities on Saturday's Responsibilities<ul><li>Install ceramic, porcelain, and natural stone tiles in kitchens, bathrooms, and other residential spaces</li><li>Prepare surfaces by cleaning, leveling, and applying appropriate underlayment</li><li>Measure and cut tiles accurately to fit design specifications</li><li>Apply grout and sealants to ensure durability and aesthetic quality</li><li>Maintain a clean and safe work environment</li></ul>Essential Skills<ul><li>Proven experience as a tile setter in residential construction</li><li>Ability to read and interpret blueprints and design plans</li><li>Strong attention to detail and craftsmanship</li><li>Knowledge of tools, materials, and safety practices</li><li>Physical ability to lift and handle heavy materials</li></ul>Additional Skills &amp; Qualifications<ul><li>Proficiency in cutting and shaping tiles using manual and power tools</li><li>Knowledge of different tile materials (ceramic, porcelain, stone, glass) and installation techniques</li><li>Ability to mix and apply adhesives, grout, and sealants correctly</li><li>Experience with waterproofing and underlayment systems</li><li>Strong problem-solving skills for layout challenges and custom designs</li><li>Familiarity with safety standards and proper use of PPE</li><li>Ability to work independently and as part of a team</li><li>Excellent time management and organizational skills</li></ul>Why Work Here?Join a team that values precision and craftsmanship, offering opportunities to apply your skills in a supportive environment. Experience the satisfaction of seeing your work contribute to the creation of quality homes.Work EnvironmentWork within a manufacturing facility that emphasizes safety and teamwork. Utilize a variety of hand and power tools in a setting that encourages collaboration and innovation.Job Type &amp; LocationThis is a Contract to Hire position based out of Sacramento, CA.Pay and BenefitsThe pay range for this position is $30.00 - $30.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Sacramento,CA.Application DeadlineThis position is anticipated to close on Dec 16, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Tile Craftsman

Job Title: Tire Technician Job DescriptionJoin our team at a new facility in Omaha, NE, specializing in tires for irrigation equipment. As a Tire Technician, you will play a critical role in our daily operations, using hand tools to swap out tires on irrigation systems. This fast-paced position requires you to be on your feet all day, working with both hand and power tools.Responsibilities<ul><li>Preassemble and organize wheels and tires for mounting.</li><li>Read and understand wheel requests from customers.</li><li>Mount different size wheels and tires accurately and efficiently.</li><li>Use basic hand tools, tire tools, alignment machines, air wrenches, and other essential tools.</li><li>Maintain a clean and organized work area.</li><li>Perform additional tasks as assigned.</li></ul>Essential Skills<ul><li>Proficiency with hand tools.</li><li>Experience in mounting and assembly.</li><li>General labor and mechanical skills.</li></ul>Additional Skills &amp; Qualifications<ul><li>Experience in skilled labor is preferred.</li></ul>Why Work Here?Enjoy working a stable day shift from 7:30 AM to 4 PM with competitive pay. Benefit from health insurance, 401(k) matching, paid time off, and employee discounts. Additional benefits include vision, dental, life, and disability insurance, as well as paid holidays and opportunities for advancement.Work EnvironmentExperience a structured work environment with hours from 7:30 AM to 4 PM, Monday through Friday. The role involves being on your feet throughout the day and using various hand and power tools.Job Type &amp; LocationThis is a Contract to Hire position based out of Omaha, NE.Pay and BenefitsThe pay range for this position is $18.00 - $22.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Omaha,NE.Application DeadlineThis position is anticipated to close on Dec 15, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Tire Technician

Job Title: Tool &amp; Die ApprenticeJob DescriptionWe are seeking a Tool &amp; Die Apprentice for 2nd and Weekend day shifts. The role involves planning, laying out, and performing bench and machine operations to build, service, repair, and maintain tools, dies, and fixtures. You will work with equipment such as surface grinders, milling machines, lathes, drill presses, belt sanders, saws, hoists, clamps, measuring tools, and forklifts. The environment includes stamping and roll forming, with dies weighing up to 8,000 pounds. A new CNC automated and robotic line is being installed, featuring several CNC Haas Mills. This is a great opportunity to advance your Machinist experience.Responsibilities<ul><li>Plan, lay out, and perform bench and machine operations to build, service, repair, and maintain tools, dies, and fixtures.</li><li>Utilize equipment such as surface grinders, milling machines, lathes, drill presses, belt sanders, saws, hoists, clamps, and measuring tools.</li><li>Work with dies weighing up to 8,000 pounds in a stamping and roll forming environment.</li><li>Use CNC Mills and Haas Mills to improve production efficiency.</li><li>Read and interpret blueprints to check parts with up to 100 dimensions.</li></ul>Essential Skills<ul><li>5+ years of CNC Machinist experience with Mills and Lathes.</li><li>4+ years of setup, change outs, offsets, and operation of CNC Milling machinery.</li><li>Proficiency in reading and interpreting blueprints.</li><li>Experience using precision measurement tools such as micrometers, calipers, and gauges.</li><li>Experience working with tight tolerances up to +/- .005.</li><li>Understanding of G &amp; M codes for tooling changes and offset adjustments.</li><li>Ability to lift 50 pounds.</li></ul>Why Work Here?Enjoy comprehensive benefits including Medical, Dental, Vision, STD, LTD, Life Insurance, and 401k. Take advantage of our onsite clinic for employees and family if enrolled in the PPO plan. Receive tuition reimbursement of $5,200 per year or $10,000 if using our online affiliate. Benefit from a PTO accrual program offering 12 days in your first year, with additional PTO for consistent attendance. Enjoy shoe reimbursement, provided uniforms if desired, gym reimbursements, and join a stable company with over 75 years in business without any layoffs.Work EnvironmentThe facility is very large, bright, clean, and organized, though loud in areas where stamping equipment is located. It includes a massive Maintenance and Tool &amp; Die shop.Job Type &amp; LocationThis is a Contract to Hire position based out of Middlebury, IN.Pay and BenefitsThe pay range for this position is $24.00 - $28.00/hr.Eligibility requirements apply to some benefits and may depend on your job
 classification and length of employment. Benefits are subject to change and may be
 subject to specific elections, plan, or program terms. If eligible, the benefits
 available for this temporary role may include the following:

 • Medical, dental &amp; vision
 • Critical Illness, Accident, and Hospital
 • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
 • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents)
 • Short and long-term disability
 • Health Spending Account (HSA)
 • Transportation benefits
 • Employee Assistance Program
 • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Middlebury,IN.Application DeadlineThis position is anticipated to close on Dec 19, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Tool And Die Apprentice

Job DescriptionWe are seeking a skilled Tool and Die Specialist to join our team on the 2nd shift. This role requires expertise in interpreting blueprints, utilizing machinery, and maintaining dies. The successful candidate will work from 2:30 PM to 11 PM, with occasional overtime extending to 1 AM.Responsibilities<ul><li>Interpret and understand blueprints to guide tasks.</li><li>Utilize an overhead crane to move dies throughout the maintenance area and into machines.</li><li>Polish and grind dies as required for maintenance and repair.</li><li>Perform MIG and TIG welding on dies to ensure functionality.</li><li>Wire limit switches accurately.</li><li>Disassemble and reassemble dies according to specifications.</li><li>Operate mills and lathes to fabricate items with precision and tight tolerances.</li><li>Perform preventive maintenance tasks on dies to ensure longevity and functionality.</li></ul>Why Work Here?Enjoy comprehensive benefits including Medical, Dental, and Vision Insurance, life insurance, and a 401K opt-in option. Receive 10 paid holidays, 10 vacation days after one year, and 6 sick days per year. Company shirts are provided to promote a team environment.Work EnvironmentWork in a temperature-controlled, family-oriented, tier 2 automotive facility. Join a small team of 93 employees across two shifts, fostering a close-knit community. The dress code includes company-provided shirts, jeans, and steel-toed shoes. The position is on the 2nd shift, Monday through Friday, with occasional overtime.Job Type &amp; LocationThis is a Permanent position based out of Beaver Dam, KY.Pay and BenefitsThe pay range for this position is $30.00 - $36.00/hr.Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental &amp; vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life &amp; AD&amp;D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave)Workplace TypeThis is a fully onsite position in Beaver Dam,KY.Application DeadlineThis position is anticipated to close on Dec 16, 2025. 
 
 <h4>About Aerotek:</h4>

We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
 
 
Aerotek offers weekly pay, employee benefits including medical, dental &amp; vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
 
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Tool And Die Maker

Learn more about free job search tools, learning opportunities, and exclusive member events.

Discover CareerCircle

Access resources to advance your job search and career growth.

Tools & Training

Explore a wide range of job opportunities that match your skills and career goals.

Search Jobs

Create a professional resume that captures the attention of top employers with our easy-to-use tool.

Resume Builder

Prepare for your next interview with our expert tips and strategies.

Interview Prep

Discover in-depth profiles of leading employers to find your ideal workplace.

Search Companies

Develop in-demand skills with curated courses for today’s job market.

Courses

Access career resources and job postings anytime, anywhere with our app.

Mobile App

Source skilled talent and build your team.

Talent Acquisition

Access skilled talent ready to excel via our AI-driven platform, virtual events, and recruitment services.

CareerCircle TalentConnect

Transform your workforce and hiring practices with essential training and continuing education.

InclusiveU

Broaden your talent pool with dedicated support for individuals with disabilities.

Getting Hired Powered by CareerCircle

Mission aligned solutions supporting Non-Profit Organizations, Educational Institutions, Local Workforce Development Boards, and Learning Providers.

Upskilling & Job Advocacy

Upskilling solutions designed to empower members with in-demand skills training and ongoing support for successful certificate completion.

CareerReady

Job advocacy solutions to connect job seekers to inclusive employers through dedicated recruiting support.

CareerAdvocacy

Learn how we connect all communities with careers and build skilled talent pipelines.

About CareerCircle

Discover answers to common questions and gain insights into our goals and services.

Reach out to us for inquiries, support, or to learn more about our mission and services.

Contact

Explore our blog for latest news and trends for job seekers and employers.

Blog

Access our virtual career fairs, job seeker workshops, and employer focused webinars.

Events

Discover valuable resources to enhance your hiring strategy and drive organizational success.

Employer Resources

Get the latest news and updates on our mission, partnerships, and community impact.

Aerotek Jobs

Browse Aerotek Jobs

JOB SEEKERS

EMPLOYERS

COMMUNITY PARTNERS

ABOUT

RESOURCES